| Author |
Message |
|
Shelby
|
 Posted: Fri Sep 18, 2009 11:23 pm |
|
|
probably a stupid question but im still new to everything and dunno if it should do it but i jacked up the rear end of the LJ50 to get the wheels off for 2stroker to pickup tomorrow and if i turn 1 in a forwad direction the other goes the opposite way??? why is that?
|
|
|
|
 |
zuki
Joined: Thu Sep 25, 2008 11:30 pm Posts: 370 Location: Ipswich
|
 Posted: Fri Sep 18, 2009 11:27 pm |
|
|
Cause it's an open diff........
_________________ Zuki
Suzuki Sierra 1990 Hardtop
Now just drive i
|
|
|
|
 |
|
Shelby
|
 Posted: Fri Sep 18, 2009 11:35 pm |
|
|
like i said i know nothing about 4wd's this is my first.
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Sep 18, 2009 11:39 pm |
|
|
oops , to many drinks
Last edited by steve on Sat Sep 19, 2009 9:10 pm, edited 1 time in total.
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Fri Sep 18, 2009 11:43 pm |
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Sep 18, 2009 11:52 pm |
|
|
it made sense on Jimmy No.8 , but i'm on Jimmy No 9 now and i don;t understand it at all.
|
|
|
|
 |
DMAC

az supporter
Joined: Thu Jan 29, 2009 10:30 pm Posts: 1612 Location: North Brisbane
|
 Posted: Sat Sep 19, 2009 12:14 am |
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sat Sep 19, 2009 12:15 am |
|
|
|
 |
DMAC

az supporter
Joined: Thu Jan 29, 2009 10:30 pm Posts: 1612 Location: North Brisbane
|
 Posted: Sat Sep 19, 2009 12:23 am |
|
ScrawnC wrote: That site is awesome!!
Did you learn how a diff works Scawn? 
|
|
|
|
 |
zuki
Joined: Thu Sep 25, 2008 11:30 pm Posts: 370 Location: Ipswich
|
 Posted: Sat Sep 19, 2009 12:33 am |
|
steve wrote:
Don't know what he's on.
This is how it works, tailshaft drives diff pinion which drives the crown wheel gear, it is bolted to a hemisphere, inside the rear hemisphere is 2 side gears these are each driven by either axle, there is also 4 star gears, 2 off them run on the side gears, the other 2 run at 90degrees to side gear but they mesh with the 2 running on side gears. so when axle turns forward, first side gear it turns star gear which is meshed to star gear at 90degrees which then turns the star gear meshed to other side gear causing it to turn opposite direction. Far out that is hard to explain in writing.
PS thats what lockers do lock the axles side both wheel have equal drive and turn the same direction and same revolutions regardless of whether a wheel is off the ground or not.
David
_________________ Zuki
Suzuki Sierra 1990 Hardtop
Now just drive i
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sat Sep 19, 2009 12:39 am |
|
DMAC wrote: ScrawnC wrote: That site is awesome!! Did you learn how a diff works Scawn? 
I liked Steves version better 
|
|
|
|
 |
DMAC

az supporter
Joined: Thu Jan 29, 2009 10:30 pm Posts: 1612 Location: North Brisbane
|
 Posted: Sat Sep 19, 2009 12:50 am |
|
ScrawnC wrote: DMAC wrote: ScrawnC wrote: That site is awesome!! Did you learn how a diff works Scawn?  I liked Steves version better 
Yer but it's based around why zuks generate awsome power using the circle spin ratio, of the reverse circlular motion spinning the wheel the other way from the drive shaft. Not how the diff actually works. 
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sat Sep 19, 2009 12:54 am |
|
Yeah see!!! Sounds heaps better!! 
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sat Sep 19, 2009 12:59 am |
|
|
hey stop using my reverse circle spin motion theory, i think i should copyright it .
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sat Sep 19, 2009 3:03 am |
|
zuki wrote: 4 star gears
I upgraded mine to 5 star gears... Cost a bit but looks much better.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Sep 20, 2009 3:27 pm |
|
DMAC wrote: ScrawnC wrote: DMAC wrote: ScrawnC wrote: That site is awesome!! Did you learn how a diff works Scawn?  I liked Steves version better  Yer but it's based around why zuks generate awsome power using the circle spin ratio, of the reverse circlular motion spinning the wheel the other way from the drive shaft. Not how the diff actually works. 

_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|