It is currently Thu Apr 16, 2026 4:30 pm
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Wed Apr 01, 2015 2:33 pm 
Reply with quote Top  
Image

• M18A conversion
• ~75000kms
• 80mm tough dog lift
• 215/75R15 BFG A/Ts
• ARB bulbar
• TJM snorkel
• Tow bar
• Tinted windows
• Rola roof rack cross bars (Thule bike rack shown in some photos not included)
• Fully engineered in NSW
12 months rego (April 2016)

$11,000 ono


I am the second owner having bought the car completely stock in Nov 2010 with 34000 on the odometer. In December 2011 I installed an 80mm Tough Dog lift kit (springs, shocks, panhard rods), Jimny bits extended brake lines and rear shock relocation brackets and some 15x7 -13 steel wheels.

August 2012 saw the installation of an M18A for more power. At the time of the conversion the car had 53970kms on the odometer and the M18A that was installed came out of a Suzuki Liana with 56000kms on the odometer. A new clutch was installed at the same time purely for convenience.

The car has been certified under the NSW VSCCS (engineer’s certificate) by Sean Kelly of SRK Engineering in Bathurst with some testing performed by Treeve Andrew of Kernow Engineering in Orange.

Despite the modifications this Jimny has only ever been used off road a handful of times and never abused as it is also my daily driver. The car was recently serviced (December 2014 @ 73xxxkms) and the front brake rotors and pads have also been changed recently (February 2015).

There are a few bad points that need to be mentioned; a small oil leak from rear of gearbox, and some slight wheel wobble that can occasionally be felt at around 60-70km/h.

The rear seats are currently installed in the car but I will also include a flat floor and rear shelf that has been custom made to fit in place of the rear seats. I was intending to build a single drawer into the shelf but no longer have the time to complete it. I will include the set of drawer slides and some matching marine carpet so the job can be completed.

- Tim.

Image

Image

Image

Image

Image

Image

_________________
SOLD - 2006 Jimny M18A, NSW Engineered


Last edited by tim80z on Fri Jul 07, 2017 9:15 pm, edited 3 times in total.
 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Wed Apr 01, 2015 2:35 pm 
Reply with quote Top  
Build thread can be found here:
http://auszookers.com/forum/viewtopic.php?f=4&t=17798

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Sun Apr 12, 2015 10:00 am 
Reply with quote Top  
Bump.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Tue Apr 14, 2015 8:52 pm 
Reply with quote Top  
Now comes with a full 12 months rego.

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Thu Apr 16, 2015 9:30 pm 
Reply with quote Top  
Image

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered


Last edited by tim80z on Fri Jul 07, 2017 9:12 pm, edited 1 time in total.
 Profile WWW  

Offline
User avatar

Joined: Wed Feb 06, 2013 8:24 pm
Posts: 1571
Vehicle: 91 Tin Top

Post Posted: Wed Apr 22, 2015 1:50 pm 
Reply with quote Top  
Surprised you haven't had more interest in this mate.

There's a good list of mods on it and such a low km Jimny at a reasonable price is pretty rare these days, I expected it to get snapped up quickly.

















Hopefully this free bump might help..... :)

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Wed Apr 22, 2015 2:21 pm 
Reply with quote Top  
To be honest I expected more interest too. I've had some interest through Carsales and a bit through Gumtree but so far no one has actually come and looked at the car or driven it.

I'm glad that you think the price is reasonable as I've been second guessing that lately. I think the price is reasonable given the 1.8L, the low kilometers and the engineering certificate. I am negotiable on price (within reason) but I haven't even had anyone try and low ball me yet.

That said, I do have one potential buyer interested at the moment. Hopefully something comes of that.

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  

Offline

Joined: Wed Dec 11, 2013 5:21 pm
Posts: 15
Vehicle: 1999 jimny

Post Posted: Wed Apr 22, 2015 5:21 pm 
Reply with quote Top  
Well since no one has low balled you I will offer you $6000 nice rig though and reasonably priced.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Sat Apr 25, 2015 8:41 pm 
Reply with quote Top  
Personal plates not included. New rego is CD48HR.

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Tue Dec 14, 2010 8:09 pm
Posts: 722
Location: Parkes NSW
Vehicle: 2006 Jimny - SOLD

Post Posted: Fri May 01, 2015 11:55 am 
Reply with quote Top  
Sold.

- Tim.

_________________
SOLD - 2006 Jimny M18A, NSW Engineered

 Profile WWW  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours