auszookers.com • View topic - GV bullbar fitment and indicators

Board index » Talking About Stuff » N00b Talk

GV bullbar fitment and indicators

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

30ONA

Joined: Fri Aug 19, 2016 6:18 am
Posts: 572
Vehicle: Suzuki Grand Vitara 04 manual

Posted: Mon Jan 29, 2018 5:55 pm

I picked up a cheap alloy bull bar today. I have some questions as I've never fitted one.

1. Can someone confirm the lights are indicators. I presume these are needed because the bar partially obscures the original ones.
2. What's the neatest and easiest way to hook them up?
3. What is a good product to clean it up with?

You do not have the required permissions to view the files attached to this post.

Chop

az supporter

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Posted: Mon Jan 29, 2018 8:25 pm

Is that air bag compatible?

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

30ONA

Joined: Fri Aug 19, 2016 6:18 am
Posts: 572
Vehicle: Suzuki Grand Vitara 04 manual

Posted: Mon Jan 29, 2018 9:44 pm

How can you tell?

ZUZUKI

Joined: Thu Sep 02, 2010 5:50 am
Posts: 427
Location: Melbourne
Vehicle: '85 Sierra LWB, '99 GV 2.5L

Posted: Tue Jan 30, 2018 12:46 am

It will have a sticker - often on the top face, but might be on the inside of one of the wings. This sticker will state that it is SRS / Air bag compatible with an ADR number & will also say "Don't remove this sticker"
The TJM alloy bar I have was identified as such - until I removed the sticker!.
That bar is not the same though.
Rgs, Michael

cairns27

Joined: Thu Dec 23, 2010 7:42 pm
Posts: 489
Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B

Posted: Tue Jan 30, 2018 4:27 am

Clean it with vinegar.

bye

30ONA

Joined: Fri Aug 19, 2016 6:18 am
Posts: 572
Vehicle: Suzuki Grand Vitara 04 manual

Posted: Tue Jan 30, 2018 4:17 pm

No sticker. It's an AMA brand. Brisbane manufacturer. I've contacted them to find out.

30ONA

Joined: Fri Aug 19, 2016 6:18 am
Posts: 572
Vehicle: Suzuki Grand Vitara 04 manual

Posted: Mon Jun 04, 2018 6:56 pm

Can I fit a JB bull bar to an SQ vitara easily?

ZUZUKI

Joined: Thu Sep 02, 2010 5:50 am
Posts: 427
Location: Melbourne
Vehicle: '85 Sierra LWB, '99 GV 2.5L

Posted: Tue Jun 05, 2018 11:40 pm

Easy is a no - completely (and I mean COMPLETELY) different - JB / JT is too wide, side returns too long, chassis non-existant.
Given enough time & money, it could probably be butchered to fit acceptably, but then it would no longer be an SRS compatible bullbar, as there are no modifications allowed - especially to the mounting arrangements.

Current SRS compatible options are Uneek, with a 'bumper replacement' type bar & XROX with a 'comp' style tube ended + central hoop bar - both are winch compatible.
TJM might still (??) do the bar I have (alloy, no winch) but not listed on their site

Rgs, Michael

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum