auszookers.com • View topic

Board index » Talking About Stuff » I made it and fabrication

Tube Tray

Page 1 of 1

[ 19 posts ]

Print view

Previous topic | Next topic

Author

Message

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Sun Aug 23, 2009 8:17 pm

Yesterday i started making a bracket for some rear lights, then it went a bit crazy from there and turned in to something completely different. Last night i was playing with Photoshop....

I used this photo from last weekend...

and made a tube tray design.....

so today i had to make the damn thing...i changed it a little and added some side rails (these were the light brackets i made yesterday, now they're side rails)

I flexed it on the ramp to see where the tyres go... very close but all clear...

I'm only half way through, i still have to add some round lights in the back section.

This is all scrap, i used an old sierra rollbar hoop for the top tube, and the rear supports from the rollbar for the lower tube.

Last edited by steve on Sat Jan 30, 2010 6:40 pm, edited 2 times in total.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sun Aug 23, 2009 8:38 pm

Looks good Steve! Is this the work you had for me yesterday?

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Sun Aug 23, 2009 8:48 pm

ScrawnC wrote:

Is this the work you had for me yesterday?

nah, started this today. I have a 2L V6 front cut that just needs a fool tank and pump and then we're ready for ignition. There's too many projects around here

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sun Aug 23, 2009 9:01 pm

Is the V6 going in the other Sierra?

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Sun Aug 23, 2009 9:12 pm

yer , this one...

Last edited by steve on Sat Jan 30, 2010 6:41 pm, edited 1 time in total.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sun Aug 23, 2009 10:36 pm

Ooooo!! V6 in a zook

_________________
I used to be indecisive,
now I'm not so sure.....

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Mon Aug 24, 2009 1:27 am

You still want my fuel tank Steve.

What's the motive to tray the buggy, a bit more rear weight??

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8135
Location: Sunshine Coast Qld

Posted: Mon Aug 24, 2009 4:00 am

steve wrote:

This is all scrap, i used an old sierra rollbar hoop for the top tube, and the rear supports from the rollbar for the lower tube.

Barwork looks good Steve.. Will be nice with a bit of red "Bodywork" in between.
Brendan would be proud to know that his Zook is going to good use !!!! :wink:

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Mon Aug 24, 2009 10:33 am

Greg, I have some lights i wanted to put on the back, and thought it might be good to have it looking a bit more like a ute instead of a buggy. There's not much weight in the bar work at the moment, but i guess when it's finished there might be, not sure if that'll be a good thing or not. It may also reduce clearence capabilities, so i guess we'll find out.

want33s, i couldn't sell the bar so thought i better chop it up.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9711
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Aug 24, 2009 1:55 pm

Looks better steve!

_________________

BlueSuzy wrote:

I'm over the G16b's.

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Fri Sep 04, 2009 10:03 pm

Did a bit more today..... put some lights in, yeah all orange, coz that's what i had, i might splash out and get some red ones one day..

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Sat Sep 05, 2009 5:55 pm

Even space for a number plate

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Sat Sep 05, 2009 10:04 pm

not quite enouh space for a plate Greg , bugger eh. coz i have some custom plates to go on somewhere.

did some more today, just cleaned it up a bit and put some paint on..

Last edited by steve on Sat Jan 30, 2010 6:45 pm, edited 1 time in total.

alex

az supporter

Joined: Sat Aug 16, 2008 11:30 pm
Posts: 2151
Location: Brissy
Vehicle: Nissan

Posted: Sun Sep 06, 2009 2:38 am

looks awsome steve now you can make me one

_________________
Pearce-toff Racing

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Sun Sep 06, 2009 12:02 pm

wait till you roll it a few times and your car looks like 11_evl's, then we can chop it up :lol:

alex

az supporter

Joined: Sat Aug 16, 2008 11:30 pm
Posts: 2151
Location: Brissy
Vehicle: Nissan

Posted: Sun Sep 06, 2009 1:26 pm

You do not have the required permissions to view the files attached to this post.

_________________
Pearce-toff Racing

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Mon Sep 07, 2009 1:16 am

i like the look of it now steve,looks a bit more complete......nice work now plates and rego haha

i have saved so many pics of 11 evl rig just cos i love the body damage.

matt

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Wed Sep 09, 2009 10:08 pm

well you should share appsie i can't find much...hmmm

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Thu Sep 10, 2009 2:48 am

there are pics on outers in the trips section.on one of the huge QLD trip driving some cool rocky creek beds and stuff.will try find em

is a cool truck

Page 1 of 1

[ 19 posts ]

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum