| Author |
Message |
striker99
Joined: Tue Jul 30, 2013 6:13 pm Posts: 269
Vehicle: Suzuki Jimny 2013
|
 Posted: Sun Dec 07, 2014 8:35 pm |
|
Hi guys, I have been having some performance issues that to me seem to have been getting gradually worse of recent times.... The car really struggles to maintain 100, and cannot seem to get to 110 easily at all now... It struggles to get over 3000 revs for any sort of hill climbs. The jimny is at 30,000km and is due for a service so will be booking that in soon... Anyhow, does this look like a cracked exhaust manifold to anyone? Not too sure what i'm looking for, but it seemed to have surface cracks...   Thanks, Matt
|
|
|
|
 |
JayKay

az supporter
Joined: Mon Jul 27, 2009 11:30 pm Posts: 1144 Location: Down Under Down Under
Vehicle: 2008 Jimny Standard As :-)
|
 Posted: Mon Dec 08, 2014 8:56 am |
|
Yeah, mines covered in them. had a go a patching it with no luck 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 12997 Location: Melbourne
|
 Posted: Mon Dec 08, 2014 11:05 am |
|
|
I can't see any cracks in the photos you've posted. A crack that's large enough to cause a noticeable performance drop will be VERY easy to spot on the casting.
|
|
|
|
 |
striker99
Joined: Tue Jul 30, 2013 6:13 pm Posts: 269
Vehicle: Suzuki Jimny 2013
|
 Posted: Mon Dec 08, 2014 5:01 pm |
|
|
Yeah they are very small cracks will try taking some decent photos...but as JayKay said...it's like the entire exhaust manifold is covered in little cracks or surface rust along that edge
|
|
|
|
 |
JayKay

az supporter
Joined: Mon Jul 27, 2009 11:30 pm Posts: 1144 Location: Down Under Down Under
Vehicle: 2008 Jimny Standard As :-)
|
 Posted: Tue Dec 09, 2014 7:54 am |
|
Here's my major one Attachment: ImageUploadedByTapatalk1418077441.045990.jpg
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
JayKay

az supporter
Joined: Mon Jul 27, 2009 11:30 pm Posts: 1144 Location: Down Under Down Under
Vehicle: 2008 Jimny Standard As :-)
|
 Posted: Tue Dec 09, 2014 8:09 am |
|
Heres a pic of mine 
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 12997 Location: Melbourne
|
 Posted: Tue Dec 09, 2014 11:30 am |
|
|
Now that's an actual crack, not a surface mark or scale. Cracks are annoying, but a rarely associated with performance loss. A very large crack might lean the car out, but the noise it produced would be so annoying you'd get it fixed well before it caused any damage. I reckon 90% of EFI vitaras are driving around with the whole manifold in about three pieces. I know my donor engine was. Couldn't hear it and there was no evidence it was leaking enough to hear or cause any performance issues.
|
|
|
|
 |
AckerDackerly

az supporter
Joined: Thu Jun 02, 2011 9:53 pm Posts: 361 Location: Independence, MO USA
Vehicle: 1993 RHD Suzuki Escudo Tintop
|
 Posted: Tue Dec 09, 2014 3:22 pm |
|
|
If it were a "real" crack, the edge of the crack would show exhaust heating/carbon buildup.
I had an SJ 1.3 manifold that actually leaked and showed it. The crack formed at the inside edge of the combining point of Cylinder 3 and 4.
_________________ -Ack http://www.acksfaq.com88, 88.5 SJ413
|
|
|
|
 |
striker99
Joined: Tue Jul 30, 2013 6:13 pm Posts: 269
Vehicle: Suzuki Jimny 2013
|
 Posted: Tue Dec 09, 2014 4:57 pm |
|
|
Hmm my jimny is making a high pitched whistling noise, can only hear it once car is turned off and lasts about a minute or so...it sounds a bit like a tyre would leaking air slowly?
|
|
|
|
 |
murcod
Joined: Thu Apr 16, 2009 11:30 pm Posts: 327 Location: Adelaide
Vehicle: XL-7 (gone) + Kizashi
|
 Posted: Wed Dec 10, 2014 11:58 am |
|
|
Buy some extractors and get rid of the cast manifold.
|
|
|
|
 |
|