[matth27]

Trying to remove my rear drums and one of the splines is stripped and the stud just keeps spinning.
Any ideas on how to undo it?

[pezz]

cold chisel is one option

[buzbox]

Hit with a hammer to remove the stud, and replace it

[pezz]

think he means the nut is still on the stud

[jono165]

I'd just cut the nut off and replace the stud. If the hole in the axles is stuffed from the stud spinning i'd just source a 2nd hand axle.

[buzbox]

Well that's a bit more of a complex operation then.

Angle grinder to chop it off.... Then hammer

[cairns27]

More complex that what?


bye

[atari4x4]

Hi

what bit don't you get?

pretty sure he means it's not as simple as knocking out the old stud as mentioned in an earlier post of his & if the nut is still on & it's spinning the knurled section on the stud or the wheel nut is stripped it will need to be cut off.

Bye

[buzbox]

An explanation of an explanation, now that's deep.

Thanks Atari , your like a miniature Buddha