auszookers.com • View topic

Board index » Talking About Stuff » I made it and fabrication

awesome welds

Page 6 of 9

[ 247 posts ]

Go to page Previous 1 ... 3, 4, 5, 6, 7, 8, 9 Next

Print view

Previous topic | Next topic

Author

Message

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Wed Jan 23, 2013 8:13 pm

thats stick for sure.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Wed Jan 23, 2013 9:22 pm

0.9mig.

It's 2 bits of 10mm plate and all my work wants to supply is a 200Amp 240V welder.

So to get enough heat into it I turn it up to 11, and pull the wire back enough to pool. It's slow going but they fall off anyway :lol:

It's a 200lb fire extinguisher bottle bracket that goes onto the back of a D11T.

Parry

Joined: Fri Oct 05, 2012 9:14 pm
Posts: 171
Location: Newcastle
Vehicle: Getting parts atm

Posted: Sun Feb 03, 2013 5:49 am

Making up some link mounts, Lincoln 180 mig is well worth it's money, top little mig

driftke70

Joined: Thu Feb 07, 2013 3:29 pm
Posts: 74
Location: buderim
Vehicle: jimny/gsxr600

Posted: Sat Feb 09, 2013 10:43 am

some of the stuff i have done on my drift corolla, all mig.

heaps of other little things i cant find pics

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Feb 11, 2013 1:44 pm

5 link rear end!

what is the specs on the rolla? My Ksev is awaiting a 1UZ swap

driftke70

Joined: Thu Feb 07, 2013 3:29 pm
Posts: 74
Location: buderim
Vehicle: jimny/gsxr600

Posted: Mon Feb 11, 2013 7:29 pm

it has a gen3 3sgte from an st205, few mods here and there, f series diff, trd 2 way, tokico hts102's, custom coil overs in the front with custom control arms and caster arms and stuff, full weld in 6 point cage, fully seam welded, recaros, w box, 14x9 - 21 allround, cant really think of anything else off the top of my head.

http://www.youtube.com/watch?v=KDf0KEAe ... qQ&index=2

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9347
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Feb 11, 2013 8:12 pm

Think ive seen that one. Is it painted blue now?

_________________
mlm

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Mon Feb 11, 2013 8:38 pm

One of my better efforts from today:

Still a bit irregular, but I'm definitely getting better.

driftke70

Joined: Thu Feb 07, 2013 3:29 pm
Posts: 74
Location: buderim
Vehicle: jimny/gsxr600

Posted: Mon Feb 11, 2013 8:40 pm

nice one

nar its still the same haggard beige and yellow, i cant bring myself to paint it, too much charm

jimmy91

az supporter

Joined: Sun Aug 12, 2012 10:49 am
Posts: 385
Vehicle: 2012 jimny

Posted: Wed Apr 10, 2013 8:32 pm

inside of a fuel tanker on a bulk head at work

055ETH

Joined: Sun Oct 23, 2011 9:05 pm
Posts: 383
Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia

Posted: Thu Apr 11, 2013 7:34 pm

the beige ke70 i have watched since you started it.. willy wag tail... i helped mercer build his ls1via and studs n scotty build their cars

Xtreme

Joined: Tue Apr 16, 2013 11:49 am
Posts: 275
Vehicle: hkbjk

Posted: Fri Apr 26, 2013 9:10 am

A few welds and jobs I have done

You do not have the required permissions to view the files attached to this post.

OVERKILL ENG

Joined: Sun Apr 15, 2012 8:47 pm
Posts: 60
Vehicle: LWB back to old school

Posted: Tue Jun 25, 2013 12:10 pm

Some welding we did on some nine inch diffs with hummer portals.. And some spider nines for a rangie we are building..

You do not have the required permissions to view the files attached to this post.

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Tue Jun 25, 2013 1:20 pm

Critical Energy

Joined: Sat Feb 23, 2013 1:37 pm
Posts: 179
Location: Sydney
Vehicle: Suzuki Stockman '85 1litre

Posted: Tue Jun 25, 2013 9:33 pm

OVERKILL ENG wrote:

Some welding we did on some nine inch diffs with hummer portals.. And some spider nines for a rangie we are building..

Awesome work

OVERKILL ENG

Joined: Sun Apr 15, 2012 8:47 pm
Posts: 60
Vehicle: LWB back to old school

Posted: Thu Jun 27, 2013 8:47 pm

Some chromoly engine mounts I made today for our new Zook build

Attachment:

ImageUploadedByTapatalk1372332014.551865.jpg

You do not have the required permissions to view the files attached to this post.

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Fri Aug 02, 2013 8:39 am

20mm-10mm plate, 10mm fillet, 1.2 metalcore wire, preheated, one run.

1 run for a complete loop.

Critical Energy

Joined: Sat Feb 23, 2013 1:37 pm
Posts: 179
Location: Sydney
Vehicle: Suzuki Stockman '85 1litre

Posted: Fri Aug 02, 2013 7:43 pm

31zook wrote:

20mm-10mm plate, 10mm fillet, 1.2 metalcore wire, preheated, one run.

1 run for a complete loop.

Chassis extension?

suzkboy

az supporter

Joined: Mon Oct 12, 2009 10:30 pm
Posts: 270
Location: South Australia

Posted: Sat Aug 03, 2013 1:43 am

These are some bits I have weldee up at home on a cig 160 tig welder. The dump pipe is a combination of 2 1/4 and 1 1/4 inch pipe. The plenum is that box section which is 2mm stainless on to a 6mm plate with 4 2" holes with ppipe and flanges all welded on.

You do not have the required permissions to view the files attached to this post.

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sat Aug 03, 2013 4:58 pm

Some welds I did the other day.

Not really a awesome weld I dont think but here is a tig weld I did on my first day at tafe on the tig.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Aug 04, 2013 12:47 pm

Critical Energy wrote:

Chassis extension?

D10T fender stiffeners.

The plate I add to the fender weighs 78kgs by itself... That's as much as a Sierra chassis lol

Asps91

Joined: Mon Apr 08, 2013 2:23 pm
Posts: 120
Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.

Posted: Fri Aug 09, 2013 2:38 pm

For someone like me with limited knowledge of welding.... Some of these welds look like porn. Anyone want to do a tiny bit of welding for my sierra :lol:

for a fee of course!

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Fri Aug 09, 2013 8:50 pm

Nice welding Joshy!

Anyone here done the MMAW AS/ME9, 2G 3G, 12mm plate test? I did mine this week and by shit is it a hard weld test. Took me 3 attempts to just past visual on each test coupon. Didn't bother taking pics as stick welding doesn't look all the great at the best of times :lol:

_________________
Tell my arse, he actually gives a crap!

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Aug 12, 2013 6:14 pm

Not awesome or anything. Just some welds on toob sliders.

_________________
2013 GV
1998 SV420 ute

Dcraw

Joined: Fri Sep 07, 2012 3:57 pm
Posts: 112
Location: Brisbane
Vehicle: suzuki sierra

Posted: Mon Aug 12, 2013 6:45 pm

Whens my apprenticeship begin Fatzook!! pompoms

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Mon Aug 12, 2013 6:49 pm

It's got spatter on it :roll:

_________________
Shep is a closet jimny lover!!!!

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Aug 12, 2013 9:31 pm

Dcraw wrote:

Whens my apprenticeship begin Fatzook!! pompoms

ASAP. There is a coily here that you can go nuts on. Start with the 9". Armsup

_________________
2013 GV
1998 SV420 ute

Dcraw

Joined: Fri Sep 07, 2012 3:57 pm
Posts: 112
Location: Brisbane
Vehicle: suzuki sierra

Posted: Mon Aug 12, 2013 10:02 pm

Fatzook wrote:

Dcraw wrote:

Whens my apprenticeship begin Fatzook!! pompoms

ASAP. There is a coily here that you can go nuts on. Start with the 9". Armsup

Done and Done, just give me a time and a place :rambo:

suzkboy

az supporter

Joined: Mon Oct 12, 2009 10:30 pm
Posts: 270
Location: South Australia

Posted: Wed Aug 14, 2013 8:39 pm

Not so much a close up of my awesome welds but here is the complete exhaust I made for my ke35 corolla. A full 2 1/4" dump pipe with 1 1/2" off the waste gate into a 2 1/2" mandrel bent system

You do not have the required permissions to view the files attached to this post.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Aug 14, 2013 8:51 pm

nice work ravedave, must be getting close now?

no cat?

_________________
You're just hating because you don't understand

Page 6 of 9

[ 247 posts ]

Go to page Previous 1 ... 3, 4, 5, 6, 7, 8, 9 Next

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum