auszookers.com • View topic - The Poor Man's Snorkel

Board index » Talking About Stuff » I made it and fabrication

The Poor Man's Snorkel

Page 1 of 2

[ 31 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Wed Jul 24, 2013 6:32 pm

EDIT: forgot to mention a had to by 20 meters of the stuff and now have heaps left, if someone want to come and pick some up to make one for themselves feel free, i live at Terrigal, NSW

Was looking at making PVC snorkel because it suited my low budget, however i had heard some bad things about them such as exploding when hitting trees etc. Instead.. i did something cheaper but potentially more dodgey and went and bought some agg pipe from Bunnings. this is the result..

Just zip tied it to my light bar and added another 2 to put an angle on it to keep the rain out. put same mesh over the top to keep out anything else that might want to get in there

Last edited by tom240 on Thu Jul 25, 2013 6:39 am, edited 1 time in total.

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14499
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Wed Jul 24, 2013 6:47 pm

I wouldn't have snipped the tag off the cable ties cos then they would look proper dodgy.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Wed Jul 24, 2013 6:53 pm

shep wrote:

I wouldn't have snipped the tag off the cable ties cos then they would look proper dodgy.

haha, how bout i glue them back on?

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Wed Jul 24, 2013 6:56 pm

As far as dodgey snorkels go it doesn't look too bad! How is it attached to the A pillar?

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Wed Jul 24, 2013 7:02 pm

Scrawn wrote:

As far as dodgey snorkels go it doesn't look too bad! How is it attached to the A pillar?

haha thanks. It's just held on with a cable tie around my light bar :oops:

but i suppose it also means it wont damage anything if it gets ripped off. Was thinking of putting a couple of dabs of sikaflex down the A pillar to stop it moving around

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Jul 24, 2013 7:12 pm

where it goes through the inner guard, get some vacuum hose & run a cut along the length of the hose & slip it over the over the hole you cut in the metal so it's not going to wear a hole in the tubing.

_________________
You're just hating because you don't understand

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Wed Jul 24, 2013 7:18 pm

atari4x4 wrote:

good idea, i ran i good bead of sikaflex around it but vacuum hose would probably work better

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14499
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Wed Jul 24, 2013 7:33 pm

tom240 wrote:

shep wrote:

I wouldn't have snipped the tag off the cable ties cos then they would look proper dodgy.

haha, how bout i glue them back on?

Haha

Is the pic still around of the one with a dolphin torch snorkel hat ?

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Jul 24, 2013 7:34 pm

i'll get my grimbo on boss :wink:

_________________
You're just hating because you don't understand

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Jul 24, 2013 7:36 pm

viewtopic.php?f=14&t=6427&p=84637&hilit=dolphin+torch#p84637

_________________
You're just hating because you don't understand

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Wed Jul 24, 2013 7:40 pm

hahaha thats awesome

Critical Energy

Joined: Sat Feb 23, 2013 1:37 pm
Posts: 179
Location: Sydney
Vehicle: Suzuki Stockman '85 1litre

Posted: Wed Jul 24, 2013 9:41 pm

Brilliant

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Thu Jul 25, 2013 12:26 am

Nice! I used vacuum cleaner hose (dyson kewality) on my 1ltr! As long as it works!

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

sjzook

az supporter

Joined: Mon Jun 13, 2011 6:02 am
Posts: 358
Location: Candyland
Vehicle: Jimny 99 2" lift, 31s etc

Posted: Thu Jul 25, 2013 7:51 am

How's it attached to the pillar?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Jul 25, 2013 12:22 pm

sjzook wrote:

How's it attached to the pillar?

Quote:

Just zip tied it to my light bar and added another 2 to put an angle on it to keep the rain out. put same mesh over the top to keep out anything else that might want to get in there

_________________
You're just hating because you don't understand

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7719
Location: Brisbane

Posted: Thu Jul 25, 2013 12:24 pm

its not the Agg pipe with the slots all the way up it for drainage is it???

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Thu Jul 25, 2013 12:50 pm

tanshi wrote:

its not the Agg pipe with the slots all the way up it for drainage is it???

hahaha no, you can get it un-slotted too

Charlie Brown

az supporter

Joined: Mon Feb 27, 2012 12:09 pm
Posts: 334
Vehicle: Vit

Posted: Sun Jul 28, 2013 8:11 pm

Good job mate!

Bretski

Joined: Fri Mar 15, 2013 8:32 pm
Posts: 207
Location: Brisbane - Mango Hill
Vehicle: Vitara 1990 SWB Soft Top

Posted: Mon Jul 29, 2013 9:28 am

Have you disabled or plugged up the warm air inlet on your air cleaner. Defeats the whole purpose if it can still get a gut-full of water from there.

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Mon Jul 29, 2013 2:43 pm

Bretski wrote:

Have you disabled or plugged up the warm air inlet on your air cleaner. Defeats the whole purpose if it can still get a gut-full of water from there.

yep, siliconed that sucker shut

Critical Energy

Joined: Sat Feb 23, 2013 1:37 pm
Posts: 179
Location: Sydney
Vehicle: Suzuki Stockman '85 1litre

Posted: Tue Jul 30, 2013 4:01 pm

What's the warm air intake for anyway, I always thought the colder the air in the better

Red89

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Posted: Tue Jul 30, 2013 4:20 pm

It helps the motor warm up in places that experience very cold temps.

pezz

az supporter

Joined: Fri May 15, 2009 11:30 pm
Posts: 2108
Location: western vic
Vehicle: sj51

Posted: Tue Jul 30, 2013 4:47 pm

Red89 wrote:

It helps the motor warm up in places that experience very cold temps.

works great too.. i manually switch mine onto the winter setting...................................................... in winter

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Tue Jul 30, 2013 5:02 pm

someone told me its only purpose was to stop the carburettor icing up when its very cold, pointless in Australia

alexxx

Joined: Sun Aug 05, 2012 9:49 pm
Posts: 823
Location: Adelaide
Vehicle: Ford Maverick 4.2 Diesel

Posted: Sat Aug 03, 2013 4:37 pm

love this!!!! love the dolphin in atari's photo better!!!

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 12997
Location: Melbourne

Posted: Sun Aug 04, 2013 2:39 pm

tom240 wrote:

someone told me its only purpose was to stop the carburettor icing up when its very cold, pointless in Australia

Not really. It doesn't have to be below freezing to ice a carb - Ice will form below about 2-3˚C, all the more so with fuel acting as a cooler.

Steve.

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Mon Aug 05, 2013 6:52 am

I have aggi pipe on mine! It's the best! Can lean over on it and it pops straight back out! I had used PVC it explodes and exhaust steel just crumbled under pressure.

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Mon Aug 05, 2013 6:58 am

suzukikid wrote:

I have aggi pipe on mine! It's the best! Can lean over on it and it pops straight back out! I had used PVC it explodes and exhaust steel just crumbled under pressure.

Haha yes! Go the agg pipe! :peaceout:

alloz

Joined: Fri Jul 15, 2016 9:23 pm
Posts: 12
Location: Australia & Indonesia
Vehicle: 1984 SJ410

Posted: Sun Jul 31, 2016 11:26 pm

Here in Java Indonesia, the only pipe like that black one you guys use is Toilet Poop Pump Out Pipe & it very strong for bashing thru the jungles here& is very recognizable as poop pipe...it is Very Bright Light Blue. My mate has made & fitted it to His LJ80 & now he has a new nickname & so does his rig. Bahahahahaha !

tom240

Joined: Tue May 21, 2013 10:57 am
Posts: 127
Vehicle: sj70 sierra

Posted: Sun Aug 07, 2016 7:13 am

Hahaha that's awesome!

Page 1 of 2

[ 31 posts ]

Go to page 1, 2 Next

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum