[larry]

ahh i shouldve grabbed the grille and rear door handle! and the aerial

[DarkHorse]

Still can... well not tonight...

$50 the lot? Think of anything else before you come over!

[DarkHorse]

Polar_Bear wrote:

I'll take the snorkel from the blue one and wheels from the white one, post to sa?

Snorkel stays.

XL7 alloys cost me $300, powdercoating $250, tyres $450 and are as new. Only letting them go if I get that back.

[Samwich]

will the guard about the drivers side wheel arch fit on a swb? if it does and its straight ill take

[DarkHorse]

Not sure... looks same down to the indicator from photos.

It's been trimmed/hammered at the bottom corner, and will have screw holes from flares in the underside of the lip, but otherwise it's good.

[Samwich]

any chance you can get a pic of it?

I stupidly put a jack under it (on top on the wheel) when doing my body lift :/ put a dent in it ):
And whats your gearbox crossmember like?

[Samwich]

1.6l dif drops to?

[MADMANx511]

I'm after the gearstick surround, but that one looks a bit rougher than my current one so I'll pass on it. Thanks anyways mate.

[DarkHorse]

Samwich wrote:

any chance you can get a pic of it?

I stupidly put a jack under it (on top on the wheel) when doing my body lift :/ put a dent in it ):
And whats your gearbox crossmember like?

Guard is straight, paint is good just a bit grubby. Will get a better shot of the bottom corner when I get the flares off.
Crossmember is good and straight, few scuffs but nothing structural. It's even been pressure washed recently!


$100 for both?

[Joe]

Samwich if your vit has the newer shaped dash that crossmember wont bolt up to your car

[Samwich]

Joe wrote:

Samwich if your vit has the newer shaped dash that crossmember wont bolt up to your car

Yeah im pretty sure mine has the newer type dash, (With only 1 clock? and not an open storage compartment?)

[Joe]

Samwich wrote:

Joe wrote:

Samwich if your vit has the newer shaped dash that crossmember wont bolt up to your car

Yeah im pretty sure mine has the newer type dash, (With only 1 clock? and not an open storage compartment?)

Yeah i had a look through your build thread and you have the newer dash, your standed exhaust and mounts will get in the way of the older shape crossmember

[Samwich]

my exhaust neeeeeds to go hahahaha
Looks shit :/

Got a quote for 2" extractors, High flow cat and 2" exhaust for $600 - but its at the end of my list hahaha

[DarkHorse]

Samwich wrote:

my exhaust neeeeeds to go hahahaha
Looks shit :/

Got a quote for 2" extractors, High flow cat and 2" exhaust for $600 - but its at the end of my list hahaha

You can n have mine for $200 - really high flow cat will need replacing, and just get the shop to cut down the end pipe...

[Samwich]

it will have different bends in it then what i need,

So do you still have the 1.6L dif drops? or any under body protection that wont fit the SV

[DarkHorse]

Bends at the back end for axle etc should be OK, just shorten the straight section?

Diff drops will be modded to fit, they're easier to work than the stockers.

No bash plates or anything... sliders won't work 'til I body lift, and I ve been thinking about starting from scratch anyway...

[Samwich]

Well if you think about getting rid of the sliders, let me know? i can cut them down

[larry]

DarkHorse wrote:

Still can... well not tonight...

$50 the lot? Think of anything else before you come over!

also need a rear windscreen, after wheeling today
$?

[DarkHorse]

Ah bugger!

Let me work out some options... think I might change the almost new one from white to blue, and you could have the one from blue for cheap.
Might get the windscreen done at the same time...

[DarkHorse]

Also have a pair of AVM hubs I swapped out today. They look good, but they are what they are.
$50

[larry]

okay cool, well let me know when youre swapping them and we'll organise when i can come round (i can help you remove and replace yours if you want too, just let me know)

[bigdogdazza]

After 1.6 gearbox if it's auto? And rola racks with runners?
Please get back to me ASAP as the bit just shat it's gearbox and goin to Fraser in 2 weeks so I am desperately trying to find a way to salvage Xmas!

[mr_ron]

G16 bellhousing bolts?

[Samwich]

bigdogdazza wrote:

After 1.6 gearbox if it's auto? And rola racks with runners?
Please get back to me ASAP as the bit just shat it's gearbox and goin to Fraser in 2 weeks so I am desperately trying to find a way to salvage Xmas!

His is manual,

Theres a guy here in canberra called "Chef" that has an auto off a 1.6 here,
Im heading up to syd maybe the week before chrissy if your keen

[bigdogdazza]

Nah gotta have it by this Friday at the latest. Thanks anyway.

[DarkHorse]

Yeah, manual, sorry mate. Hope you find one. Can do the Rola tracks and crossbars for you. Any time you want to swing past Leichhardt let me know.

mr_ron - I'm just waiting to sort out what's happening with the motor, don't want to stuff up a $1500 sale for the sake of $20 worth of bolts. How much of a hurry are you in for them?

[DarkHorse]

larry wrote:

DarkHorse wrote:

Still can... well not tonight...

$50 the lot? Think of anything else before you come over!

also need a rear windscreen, after wheeling today
$?

Rear glass will be out and ready to collect by the end of the week.

$100?

[DarkHorse]

BUMPING - need this gear gone.

Updated first post, added pics, dropped prices - bunch of stuff now FREE!!!

If it's not listed, please ask - chances are pretty good I've got one of something between the two cars.

[larry]

DarkHorse wrote:

larry wrote:

DarkHorse wrote:

Still can... well not tonight...

$50 the lot? Think of anything else before you come over!

also need a rear windscreen, after wheeling today
$?

Rear glass will be out and ready to collect by the end of the week.

$100?

sounds alright, pickup friday/saturday?

[DarkHorse]

Yeah, round then. I'll shoot you a message when it's ready.