[DarkHorse]

Sad to say, but the Teflon Vitara is going to god. I'll be pulling all the aftermarket gear I can that will go straight across to the new SV620, so there'll be a bunch of gear off that as well. The major stuff is listed below, or hit me up for anything else and I'll let you know if I've got it available. Can get pics of anything, just ask.

Car is getting picked up for scrap tomorrow morning, so anything not bought will be sent away with it.


1.6 LWB Stuff

Almost new radiator - $100
Retro-fitted factory AC (all there, not cold - will include the J20 compressor) - $100
Body panels except tailgate, bonnet, rear bumper and front quarters - most good
Interior mostly good, few screw holes in plastics
Spare Radiator Hoses (top and outlet for G16B, top for G16A I think) - $20
[/list]



2.0L LWB stuff

Control arms, springs, struts, shocks
4.8 (auto) rear diff centre - $50
Transfer Case (includes driveshafts for matching splines in early Vit) - $50
LHS CV shaft - $50


Other:
J20 AC compressor (spins freely, unsure of working order) - $50
Winch fairlead - $FREE
Pair of old Narva 170s (working fine) - $50
GV front brake rotors (brand new) - $100

[atari4x4]

specs on alloys?

[DarkHorse]

No idea. Car is arriving in about half an hour, I'll get a tape measure onto them.

[sideways]

atari4x4 wrote:

specs on alloys?

X2, cool wheels.

[DarkHorse]

Mullins Wheels
15x8, around +25 offset

[alexxx]

ill take the black XL7 ones!!!!

[sideways]

DarkHorse wrote:

Keep that up, I might decide I like them better than the black XL7 ones...

Those are cool too though.

[ninjamoses]

Alloys look decent. Need a build thread for the new one stat. Should be a monster in no time with everything you've got already.

[DarkHorse]

That's the plan. Got a trip late next week, so will at least be getting all the non-engineering stuff swapped by then.

Build will come when I start building!

CBF measuring rims tonight, sorry.

[atari4x4]

thats cool, i'm guessing 16's?

funny that the diff centres out of my blagon have ended up back in shitney.

[DarkHorse]

Yeah, they'd have to be 16s, and assuming 7s given the relatively small tyres. Will confirm in the morning.

Only thing funnier would be if someone from Brisbane or Perth bought them.

[93zook]

feel like shipping the g16b interstate?

[Oldmate28]

I'll take the cup holder console off ya!

[camskea]

Will the snorkel fit a SWB 1.6 carby motor?

[DarkHorse]

93zook wrote:

feel like shipping the g16b interstate?

Can do, I can strap it to a pallet and arrange a pickup time with the carrier of your choosing.

Oldmate28 wrote:

I'll take the cup holder console off ya!

Done. PM me address and I'll get postage cost.

camskea wrote:

Will the snorkel fit a SWB 1.6 carby motor?

I think so... what side does the air intake point? You might have to get tricky adapting some piping.

[alexxx]

You will have to adapt some piping but its an easy mod

[DarkHorse]

Bumping, list updated.

[camskea]

My intake runs over to the passenger side and out the wheel arch by the look of it...

[DarkHorse]

So just some convo tubing and a couple of hose clamps...

Let me know if you want it.

[monley]

Willing to post the wheel spacers? If so, how much to 6210?

[DarkHorse]

Yeah mate, of course.

AusPost website says around $25 postage.

PM me an address and I'll give you bank details.

[gvzookdriver]

You making a trip to brissie any time soon

[dono1]

How much for the 1.6 bonnet? Does it have the hinges attached? I need them too. Ill be keen in the body lift if the sale falls through.

Cheers.
Donny.

[DarkHorse]

gvzookdriver wrote:

You making a trip to brissie any time soon

Not on the immediate agenda. What you chasing?

dono1 wrote:

How much for the 1.6 bonnet? Does it have the hinges attached? I need them too. Ill be keen in the body lift if the sale falls through.
Cheers.
Donny.

$100? Can have hinges. It has had some bracing underneath 'modified'... just so you know.

[DarkHorse]

atari4x4 wrote:

specs on alloys?

They're actually 15x8s, offset around +15
Going to hold onto them for the moment...


Oh, and the car was originally owned in WA

[gvzookdriver]

DarkHorse wrote:

gvzookdriver wrote:

You making a trip to brissie any time soon

Not on the immediate agenda. What you chasing?.

the hand winch. Need something just incase I get in trouble. (need to save up for a winch and bar to suit but lots of things needed before then)

[DarkHorse]

Yeah, it weighs about 25kg and will box up at 85x45x20 if you want to chase quotes.

[gvzookdriver]

What's your postcode

[MADMANx511]

Centre console? Either one, looks to be the same in the 2.0 as my 1.6 so whichever is easiest for you. I'd need to pay for shipping to Brisbane 4053.

[DarkHorse]

MADMANx511 wrote:

Centre console? Either one, looks to be the same in the 2.0 as my 1.6 so whichever is easiest for you. I'd need to pay for shipping to Brisbane 4053.

Which bit? Handbrake surround, gearstick surround or stereo surrounds?

Handbrake surround is pending, gearstick surround is a bit rough having been chopped for body lift and UHF face:

Boot is custom leather and glued to the underside. I'll include the matching transfer shift boot which is attached to the surround that screws down to the body. $15 shipped.

Stereo surround pieces should be fine, $15 shipped.