auszookers.com • View topic - FS (Brisbane)

Board index » Shift It And Find It » Getting rid of stuff

FS (Brisbane) - Sierra bits UPDATED!

Page 1 of 1

[ 30 posts ]

Print view

Previous topic | Next topic

Author

Message

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Mon Mar 05, 2012 12:50 pm

THIS IS 100% UP TO DATE

Make an offer, all parts must go!

- 1 open front WT diffs - $150 each ONO
- 1 open rear WT diff - $150 ONO
- 6 point roll cage (8 point if you count tyre carrier points) can't go in with back seats but I can take out the tyre carrier bit if you want to run with seats)
- 2 pairs of home made drop shackles (will lift car 2-3" and flex a heap downwards, great to throw on for a play day)
- A set of 4 black sunnies 16*7"
- A set of 4 1.5" Wheel spacers
- 1 Starter motor

Contact me preferably by text to 04 2424 4525 for speedy response, I can freight items also.

Last edited by skeletonbobo on Wed Mar 28, 2012 4:24 pm, edited 3 times in total.

Junior_91

Joined: Tue Mar 17, 2009 10:30 pm
Posts: 1084
Location: Ipswich

Posted: Mon Mar 05, 2012 2:00 pm

I'll take the rear diff!

_________________
TWIN LOCK IT & JUST DRIVE!

SM TOWN

Joined: Tue Feb 07, 2012 11:42 pm
Posts: 165
Location: Brisbane
Vehicle: Sierra

Posted: Mon Mar 05, 2012 2:53 pm

do you have a standard bumper or standard vinal floor mats?

_________________
http://www.youtube.com/watch?v=YFbyh0wzTS0

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Mon Mar 05, 2012 3:37 pm

Got doors in decent nick?

_________________
JrZook - Mine only hangs 2.5".

Maxi

Joined: Sun Jul 25, 2010 2:54 pm
Posts: 49
Location: Adelaide

Posted: Mon Mar 05, 2012 3:40 pm

PM'd Thanks

055ETH

Joined: Sun Oct 23, 2011 9:05 pm
Posts: 383
Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia

Posted: Tue Mar 06, 2012 6:13 am

where in bris are you located?

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Wed Mar 07, 2012 11:57 am

Only have passenger door.

Caboolture north Bris

No bumper sorry, no vinyl mats.

dono1

az supporter

Joined: Fri Nov 26, 2010 10:57 pm
Posts: 566
Location: Mid North Coast NSW

Posted: Wed Mar 07, 2012 12:52 pm

Can you post ip pics of the drop shackles?

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Tue Mar 13, 2012 9:36 am

Update!

I still have:

6 Point roll cage
1 * Rear open diff
2 * Front open diffs
2 * Pairs of drop shackles
1 * 35" shitty tyre on zook rim for spare
1 * 1.3L Gearbox
1 * Jack shaft? I think thats what it's called
1 * Starter motor for 1.3L
1 * Recently overhauled carb (cost me $350)
1 * Air box and pipes for 1.3L

Make an offer!

Text 04 2424 4525 for quick response!

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Tue Mar 13, 2012 9:38 am

Can freight anywhere for cheap too as I can use my works couriers!

zook83

Joined: Thu Jun 02, 2011 2:28 am
Posts: 157
Location: brisbane

Posted: Tue Mar 13, 2012 7:25 pm

ill take the front diff i u can freight it to morayfield

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Wed Mar 14, 2012 10:06 am

zook83 - do you kiss your mother with that face?

Only 1 front diff left

Sorry about the pictures, was the best I could do in the five minutes I was home yesterday afternoon, it's in two parts the front section bolts to the rear section and bolts to the floor, the tyre carrier bit bolts to the rear seat belt bolt holes and cant be used with a rear seat in unless you cut it off which would be a five minute job.

I still have:

6 Point roll cage
Set of 4 1.5" Wheelspacers for Sierra stud pattern
Set of 4 16"*7" black sunnies barely used.
1 * Rear open diff
1 * Front open diff
2 * Pairs of drop shackles
1 * 35" shitty tyre on zook rim for spare
1 * 1.3L Gearbox
1 * Jack shaft? I think thats what it's called
1 * Starter motor for 1.3L
1 * Recently overhauled carb (cost me $350)
1 * Air box and pipes for 1.3L

Make an offer!

Text 04 2424 4525 for quick response!

Bennyzarb

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 501
Location: north richmond

Posted: Wed Mar 14, 2012 4:35 pm

Hay mate I'm interested in your drop shackles can you upload a pic plz

_________________
92sierra ht 33s 5in lift 2in zorst gti powered

kris_phillips528

Joined: Wed May 25, 2011 7:34 am
Posts: 33
Location: ipswich qld

Posted: Fri Mar 16, 2012 3:28 pm

Will the cage fit under a soft top?

zook83

Joined: Thu Jun 02, 2011 2:28 am
Posts: 157
Location: brisbane

Posted: Sat Mar 17, 2012 7:35 pm

yeh mate no problems

zzyxxx

az supporter

Joined: Sat Feb 04, 2012 7:32 pm
Posts: 63
Location: Cooooolie baby wa
Vehicle: 1993 Soft Top, komatsu wa 430

Posted: Mon Mar 19, 2012 9:43 am

Hey bud would you be keen on selling the carb +freight to Perth

_________________
(•_•) ( •_•)>⌐■-■ (⌐■_■)yeaah!

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Mon Mar 19, 2012 4:47 pm

Carb - $150 + freight
Still have roll cage which will fit a soft top
Still have 1 front diff centre
1 * 1.3L gearbox
1 * 1.3L starter motor

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Mon Mar 19, 2012 5:03 pm

Who rebuilt the carb??

_________________
Shep is a closet jimny lover!!!!

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Wed Mar 21, 2012 10:49 am

Update -

Carby gone

I still have:

2 pairs of home made drop shackles
4 * Black sunnies 16x7 F100 offset
1 * 1.3L starter motor
6 point internal roll cage
1 * 1.3L Gearbox
1 set of four 1.5" wheel spacers to suit sierra

text 04 2424 4525

Last edited by skeletonbobo on Fri Mar 23, 2012 9:11 am, edited 1 time in total.

Toyzuka

Joined: Wed Mar 21, 2012 8:04 pm
Posts: 8
Vehicle: 1991 SJ70

Posted: Wed Mar 21, 2012 8:47 pm

How much for the wheel spacers, freight to Vic ?

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Fri Mar 23, 2012 9:05 am

Paid $220 originally

I'd do $180 inc freight.

Text me on 04 2424 4525 if your interested.

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Fri Mar 23, 2012 11:33 am

If Toyzuka doesn't end up with those wheel spacers my brother might be interested. Have you got pics?
Let me know

_________________
JrZook - Mine only hangs 2.5".

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Fri Mar 23, 2012 6:39 pm

I don't on me no, they are just spacers, perfect condition etc look like any other, they are silver.

First come first served, I've had wayyyyyy too many people stuff me around to bother holding things for people anymore.

Text 04 2424 4525 if your interested.

skelaaleks

Joined: Wed Jun 09, 2010 8:31 am
Posts: 237
Location: brissy

Posted: Sun Mar 25, 2012 9:26 pm

Are they diff housing or centers?

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Mon Mar 26, 2012 8:49 am

Centres

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Tue Mar 27, 2012 1:32 pm

Gearbox sold.

Still have (all to suit sierra)

Cage
Home made drop shackles
Starter motor
A set of 4 1.5" wheel spacers
Drive shaft that goes from Gbox to Tcase
Set of 4 black sunnies 16x7"

Make an offer. 04 2424 4525

skeletonbobo

Joined: Fri Aug 12, 2011 5:09 am
Posts: 36
Location: Brisbane

Posted: Wed Mar 28, 2012 4:24 pm

bump! top, original post has been updated!

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Mon Apr 16, 2012 8:40 am

What offset are these rims?

_________________
If you can read this, please tip me back over

matt146x

Joined: Tue Mar 20, 2012 5:11 pm
Posts: 11
Vehicle: coily....................:P

Posted: Tue Apr 24, 2012 7:42 am

will that cage fit into a hard top at all?

Tassierra

Joined: Wed Apr 25, 2012 2:33 pm
Posts: 85
Vehicle: 1990 suzuki sierra

Posted: Wed Apr 25, 2012 3:10 pm

how much for the starter motor + freight to tasmania ?

Page 1 of 1

[ 30 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum