auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Strange Noise

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

TASSIETOYUKI

az supporter

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Posted: Tue Dec 23, 2008 4:05 pm

Helloo good peoples of AUSZOOKERS, I am hoping that one of you smart people may have come across a noise like this one before.

We thought it may have been from the front shaft. The slip joint has some movement but have seen much worse. Any way we have fitted a new slip yolk but have not tried it yet. Transfer has no metal in oil. Give it a listen and tell us what you think. BTW this is in Zookenator's bus.

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Dec 23, 2008 4:10 pm

CV?

TASSIETOYUKI

az supporter

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Posted: Tue Dec 23, 2008 4:25 pm

Should also mention that this is with hilux diffs, ARB air locker but not turned on. front diff seems to jerk when noise happens

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14499
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Tue Dec 23, 2008 4:32 pm

uni, maybe

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Dec 23, 2008 4:51 pm

front output shaft in tcase?

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Tue Dec 23, 2008 5:04 pm

sounds just like the uni's in my old car. do they bind when flexing?

if so the flog out really quick.

could also be a stuffed spring bush

TASSIETOYUKI

az supporter

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Posted: Tue Dec 23, 2008 5:17 pm

I was wondering about the output shaft noise myself. Have not heared it before so dont know. Transfer is only very low k's new from the states though!

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Dec 23, 2008 5:46 pm

I reckon it is a CV still...

zookernator

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Posted: Wed Dec 24, 2008 1:57 am

Thanks Jon!! Your a champ

The drivers side cv has been clicking on full lock.. but its still working. When it happens, the vehicle "shudders". The unis havent been binding up.. im running late model lux unis which have plenty of travel. Like Jon mentioned, the transfer is fairly new still.. 6.5:1 from low range off road. It hasnt got the heavy duty front output shaft. Drained the transfer oil.. no signs of metal (thank god) Spring bushes are still fairly new.. replaced them when i did the conversion. I thought it was the front shaft, as it had heaps of slop in the slip yolk. If i left the hubs in.. and went down the road (>50 kph for eg).. it would start getting this real horrible slapping noise from the slip yolk! Jon has fixed the shaft up for me, will be putting it back in t'row and trying it.

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

zookernator

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Posted: Sun Dec 28, 2008 6:33 pm

Just for interest sake, it was the slop in the front shaft causing that noise!! All fixed now

Thanks for your help jon!

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

TASSIETOYUKI

az supporter

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Posted: Mon Dec 29, 2008 12:58 pm

, Sorry missed the weekend. You know how family are :roll:

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Damon and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum