auszookers.com • View topic - Exedy Heavy Duty Clutch kit

Board index » Shift It And Find It » Getting rid of stuff

Exedy Heavy Duty Clutch kit

Page 1 of 1

[ 18 posts ]

Print view

Previous topic | Next topic

Author

Message

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Wed Apr 27, 2011 12:43 pm

hey fellas bought this for a engine conversion but was the wrong fit.

it is an 18 spline clutch in exelent condition never been used, still in origional box. looking for $150 plus postage.

alexvitara

az supporter

Joined: Sat Mar 26, 2011 8:45 am
Posts: 1602
Location: Gold Coast

Posted: Wed Apr 27, 2011 1:23 pm

what will this fit?

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Wed Apr 27, 2011 3:18 pm

it suits a sierra, unsure on which gearbox as of yet but will find out shortly.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Apr 27, 2011 3:50 pm

whats the part number on the box, can't quite make it out.

_________________
You're just hating because you don't understand

goldpoacher

Joined: Sat Sep 27, 2008 11:30 pm
Posts: 85
Location: WA,Vict,NSW Goldfields
Vehicle: MG410 1.6efi broken rear diff

Posted: Wed Apr 27, 2011 10:43 pm

Looks like S?K 6293 as SZK 6293 which suit SJ413

beerhound

Joined: Mon Apr 04, 2011 2:35 am
Posts: 168
Location: Ipswich

Posted: Wed Apr 27, 2011 11:17 pm

SZK 6293 damn not the one i need but someone grab it thats cheap g/l with the sale

_________________
http://www.abcspareparts.com/
http://www.cityview

reeceh

az supporter

Joined: Thu Apr 29, 2010 8:45 am
Posts: 1230
Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's

Posted: Thu Apr 28, 2011 12:32 am

If this suits a 91 hardtop 1.3 5 speed and if ur willing to post to Brisbane ill prolly take it.

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Thu Apr 28, 2011 2:12 am

atari4x4 wrote:

whats the part number on the box, can't quite make it out.

szk-6293

this is an 18 spline clutch so you might wont to check your gearbox out put shaft to see if it will fit.

and i will post if your still interested

reeceh

az supporter

Joined: Thu Apr 29, 2010 8:45 am
Posts: 1230
Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's

Posted: Thu Apr 28, 2011 2:41 am

I've goty clutch out for my 1.6 so I'll go home and count the old clutch

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Fri Apr 29, 2011 5:35 am

anyone intereseted

offroader-rama

Joined: Thu Mar 08, 2007 10:30 pm
Posts: 128
Location: redlands, queensland

Posted: Fri Apr 29, 2011 6:48 am

i think it suit coily, 89 onwards from memory most sierra's are a 20 tooth a 1 ltr also has 18 tooth but i think a smaller clutch over all od ? may help some one

_________________
LWB ca18det 37's etc
LWB g16a 31's etc
GU Twin c

brad-parker

az supporter

Joined: Sun Apr 03, 2011 7:04 am
Posts: 381
Location: perth/Rockingham

Posted: Fri Apr 29, 2011 9:34 am

if it will fit a 94 sierra 1.3l i may be interested.

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Fri Apr 29, 2011 5:18 pm

it will fit a one litre gear box and some 1.3lt gearbox's but you will have to check your 1.3

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Sun May 01, 2011 1:24 pm

ok if anyone is interested let me know and i will send it, but i have warned you to check, though it is definatly sierra.

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Tue May 10, 2011 2:01 am

*Bump

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Thu May 19, 2011 5:39 am

bump

masterA

az supporter

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Posted: Mon Sep 26, 2011 7:39 am

Im assuming this was for your GTi conversion?

Do you have the 1.3L WT sierra g/box?

There are 2 part for exedy clutches

SZK-6293 (this is for a 18 spline)

SZK-6474 (OME replacement for the 20 spline)
SZK-6474HD (HD version)

Im assuming you would want to use the SZK-6474HD for teh GTi conversion?

sbbunno

Joined: Mon Mar 08, 2010 10:30 pm
Posts: 420
Location: Perth/bunbury

Posted: Mon Sep 26, 2011 2:19 pm

no bought it for the 1.6l conversion though the description was for a 20 spline

Page 1 of 1

[ 18 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum