auszookers.com • View topic - Custom snorkel

Board index » Talking About Stuff » I made it and fabrication

Custom snorkel - Finished Pics !!

Page 1 of 1

[ 19 posts ]

Print view

Previous topic | Next topic

Author

Message

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Sat Feb 26, 2011 9:22 pm

Fabbed up my snorkel today, just need to put the 90 degree rubber bend on the top and all done.

You do not have the required permissions to view the files attached to this post.

Last edited by jungas on Thu Mar 17, 2011 7:38 am, edited 1 time in total.

laurie

az supporter

Joined: Fri Oct 31, 2008 10:30 pm
Posts: 1540
Location: Blackbutt
Vehicle: LJ80

Posted: Sat Feb 26, 2011 9:34 pm

that looks cool. is it exhaust pipe?
how did you get the bend thru the guard?
i would love some close up pics to show the local exhaust joint.

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Sat Feb 26, 2011 10:05 pm

Yea it's 2 1/2 inch exhaust pipe, i started with 1m of straight pipe and 2 90 degree mandrel bends then just cut and welded the different angles to get the bend...... took a few hours in all.

I'll grab some photos of the bend for you today sometime.

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Feb 26, 2011 10:40 pm

looks really good

so simple, something ill add to my list

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Thu Mar 17, 2011 7:45 am

Hey guys just a few pics of the finished product.

Pretty happy with the way it's turned out, let me know what you think.

You do not have the required permissions to view the files attached to this post.

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Thu Mar 17, 2011 7:49 am

Top job mate. Unsure about the bend at the top though. It is your snorkel not mine though, as long as you like it who gives a shit

_________________
Shep is a closet jimny lover!!!!

mr_ron

az supporter

Joined: Fri Jan 28, 2011 8:16 am
Posts: 279
Location: Beenleigh, Qld
Vehicle: Vitara

Posted: Thu Mar 17, 2011 8:07 am

that look rather tidy

.. How did you secure it to the pillar? also, i saw you dont have any hose clamps on the silicon joins?

Looks good tho mate

Ron

_________________
Repping it, High Top style!

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Thu Mar 17, 2011 8:44 am

mr_ron wrote:

that look rather tidy

.. How did you secure it to the pillar? also, i saw you dont have any hose clamps on the silicon joins?

Looks good tho mate

Ron

Yep keen eye..... yet to put the hose clamps on. As far as securing to the A pillar the snorkel has tabs welded on and it is screwed onto the pillar

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Thu Mar 17, 2011 9:03 am

was about to say looks good but please don't point the inlet backwards......

then i saw the other pics........

:cry:

_________________
builder of custom road legal zooks......and stuff.

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Thu Mar 17, 2011 9:54 am

joeblow wrote:

was about to say looks good but please don't point the inlet backwards......

then i saw the other pics........

:cry:

What is wrong with the inlet backwards ?

I'm not 100% sure about the rubber bend at the top and it's the first time i've done it this way.... even if the rubber bend comes off the mandrel bend that will replace it will still point back.

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Thu Mar 17, 2011 12:21 pm

how much for the silicone bends?

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Fri Mar 18, 2011 3:53 am

All up about $70 for the bends.

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Fri Mar 18, 2011 2:35 pm

cheers for that just a bit more than that over here like $50 a bend

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Fri Mar 18, 2011 7:18 pm

joeblow wrote:

was about to say looks good but please don't point the inlet backwards......

then i saw the other pics........

:cry:

So you just come along, stick your little insult in with no explanation, then bugger off? :roll:

jungas

Joined: Tue Apr 13, 2010 11:30 pm
Posts: 70
Location: Melbourne

Posted: Fri Mar 18, 2011 8:55 pm

zookyute1981 wrote:

cheers for that just a bit more than that over here like $50 a bend

Got mine from ebay and everything is shipped to your door...... they seem to be really good quality too. I checked supercheap and repco and they were all $50 each to.

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Mon Mar 21, 2011 4:48 am

ScrawnC wrote:

joeblow wrote:

was about to say looks good but please don't point the inlet backwards......

then i saw the other pics........

:cry:

So you just come along, stick your little insult in with no explanation, then bugger off? :roll:

Its a VIC thing......... :crazy:

_________________
Lil Foot!
http://tiny.cc/gtsw1

shakes

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Posted: Mon Mar 21, 2011 6:23 am

JrZook wrote:

ScrawnC wrote:

joeblow wrote:

was about to say looks good but please don't point the inlet backwards......

then i saw the other pics........

:cry:

So you just come along, stick your little insult in with no explanation, then bugger off? :roll:

Its a VIC thing......... :crazy:

Oi! don't put us all in the same basket... Just came to ask why not face it backwards?

mighty_vites

Joined: Fri Oct 01, 2010 6:41 am
Posts: 218
Location: Mackay
Vehicle: SV420 SE416SWB SE416LWB SIERRA

Posted: Mon Mar 21, 2011 8:46 am

wasnt there a link on here about the yeah-nah's and the nah-yeah's on back to the forwards snorkles

shakes

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Posted: Wed Mar 23, 2011 1:12 am

mighty_vites wrote:

wasnt there a link on here about the yeah-nah's and the nah-yeah's on back to the forwards snorkles

http://auszookers.com/index.php?name=Fo ... ds+snorkel found it :helloo:

Page 1 of 1

[ 19 posts ]

Board index » Talking About Stuff » I made it and fabrication

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum