| Author |
Message |
Blake1191
Joined: Mon Jun 21, 2010 12:26 am Posts: 32 Location: QLD
|
 Posted: Wed Jul 14, 2010 12:09 am |
|
just a quick question maybe a stupid one too.
is it better to go and buy a rear locker for my 89 vitara or would it be okay still to get it welded just in the rear? ive talked to a few people whos done it they havnt had to much problem from what they told me? but yeah just any thoughts.
cheers. blake
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Wed Jul 14, 2010 12:12 am |
|
|
I ran a welded rear in my sierra for years, yeah they are probably easier to live with than an auto locker but I found the accelerated tyre wear actually made it cheaper to fit an airlocker in the long run
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Wed Jul 14, 2010 12:42 am |
|
royce wrote: I ran a welded rear in my sierra for years, yeah they are probably easier to live with than an auto locker but I found the accelerated tyre wear actually made it cheaper to fit an airlocker in the long run
X elleventybillion!! Auto lockers suck for street driven zooks. Welded is much nicer. Even better is the airlocker.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Wed Jul 14, 2010 1:29 am |
|
|
agreed - i've run welded and now air... air rocks, and welded was extremely predictable so it was easy to get used to.
autolockers get your car impounded for "hooning" around roundabouts =P
_________________ 
|
|
|
|
 |
Zachius
Joined: Sat May 23, 2009 11:30 pm Posts: 152 Location: Newcastle
|
 Posted: Wed Jul 14, 2010 1:43 am |
|
|
... I see the auto locker haters are out in force today ...
Yes a welded rear is more predictable, however that does not mean that lock-rites (I cannot speak for other auto lockers as I have no experience with them) are unpredictable.
A properly working auto locker will also cause less tyre wear than a welded diff but more than an air locker (obviously).
If you daily drive the vitara I would not recommend a welded rear.
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Wed Jul 14, 2010 2:28 am |
|
Zachius wrote: ... I see the auto locker haters are out in force today .... yep.....you bet. Zachius wrote: however that does not mean that lock-rites (I cannot speak for other auto lockers as I have no experience with them) are unpredictable. oh yes they are! Zachius wrote: A properly working auto locker will also cause less tyre wear than a welded diff but more than an air locker (obviously). only if you 'coast' around every single corner or bend in the road. otherwise tyre wear between the two is very much the same. Zachius wrote: If you daily drive the vitara I would not recommend a welded rear.
i would not recomend a welded....let alone an auto locker. both are rubbish and illegal.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
 Posted: Wed Jul 14, 2010 2:38 am |
|
joeblow wrote: Zachius wrote: If you daily drive the vitara I would not recommend a welded rear. i would not recomend a welded....let alone an auto locker. both are rubbish and illegal.
I was under the impression an "auto-locker" (meaning ratchet type I guess) was legal as in theory they do unlock for corners?
_________________ Clearance Hole Technology 
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Wed Jul 14, 2010 2:53 am |
|
|
nope... the law still sees them as a locked diff, as they are in fact an auto-UNlocker.
_________________ 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Jul 14, 2010 7:32 am |
|
alien wrote: agreed - i've run welded and now air... air rocks, and welded was extremely predictable so it was easy to get used to.
autolockers get your car impounded for "hooning" around roundabouts =P
Same with welded.. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Wed Jul 14, 2010 7:53 am |
|
|
haha but with a welded you cant say it slid out unexpectedly... cos it was well expected =P
When mine was welded, every corner was a sideways one in the wet... there was just no stopping it, even driving in first gear around a roundabout it used to kick the ass out... the ONLY way not to slide was not to touch any pedals while cornering, and thats gay.
_________________ 
|
|
|
|
 |
taszook
Joined: Wed Jul 07, 2010 9:14 am Posts: 173 Location: Tasmania
|
 Posted: Wed Jul 14, 2010 8:57 am |
|
|
well i know someone who runs lockrights front and rear in his hilux and has no problems at all on road. only problem he said was in 4l it didnt like to turn in mud xD so from what he has told me i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha. hopefully have it by the weekend and i'll make my own decision on it
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Jul 14, 2010 9:03 am |
|
taszook wrote: well i know someone who runs lockrights front and rear in his hilux and has no problems at all on road. only problem he said was in 4l it didnt like to turn in mud xD so from what he has told me i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha. hopefully have it by the weekend and i'll make my own decision on it
Linky????
Pic's??? 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Wed Jul 14, 2010 9:15 am |
|
_________________ 
|
|
|
|
 |
Red89
Joined: Tue Jan 12, 2010 10:30 pm Posts: 2801 Location: Perth
|
 Posted: Wed Jul 14, 2010 9:22 am |
|
steknig wrote: taszook wrote: well i know someone who runs lockrights front and rear in his hilux and has no problems at all on road. only problem he said was in 4l it didnt like to turn in mud xD so from what he has told me i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha. hopefully have it by the weekend and i'll make my own decision on it Linky???? Pic's??? 
http://www.locktup4x4.com.au/blog/?cat=6
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Jul 14, 2010 9:28 am |
|
Red89 wrote: steknig wrote: taszook wrote: well i know someone who runs lockrights front and rear in his hilux and has no problems at all on road. only problem he said was in 4l it didnt like to turn in mud xD so from what he has told me i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha. hopefully have it by the weekend and i'll make my own decision on it Linky???? Pic's???  http://www.locktup4x4.com.au/blog/?cat=6
Cheer's mate.. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Wed Jul 14, 2010 9:50 am |
|
taszook wrote: i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha.
it is ED ZACHARY the same!
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
taszook
Joined: Wed Jul 07, 2010 9:14 am Posts: 173 Location: Tasmania
|
 Posted: Wed Jul 14, 2010 10:01 am |
|
joeblow wrote: taszook wrote: i've ordered a spartan locker, not sure why i chose the spartan over lockright think it looked like a better design to me haha. it is ED ZACHARY the same!
not quite, the spring/pin set up is different and easier to install xD
|
|
|
|
 |
skelaaleks
Joined: Wed Jun 09, 2010 8:31 am Posts: 237 Location: brissy
|
 Posted: Fri Jul 16, 2010 2:14 am |
|
|
Depends on how much money you have
Welding would be your cheapest option. + you dont have to worry about air pumps and junk.
Side note a fully locked diff (welded or proper full spool) will make your zook a bit more driveable on the highways
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Fri Jul 16, 2010 2:17 am |
|
skelaaleks wrote: Depends on how much money you have Welding would be your cheapest option. + you dont have to worry about air pumps and junk.
Side note a fully locked diff (welded or proper full spool) will make your zook a bit more driveable on the highways
More drivable than what, a lockwrong?
Anything is more driveable than a lockwrong!
_________________ I want my old sig back 
|
|
|
|
 |
skelaaleks
Joined: Wed Jun 09, 2010 8:31 am Posts: 237 Location: brissy
|
 Posted: Fri Jul 16, 2010 2:33 am |
|
|
more drivable than standard.
Well i believe anyway
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Fri Jul 16, 2010 2:36 am |
|
|
Welded is more drivable on road than open?
In what way??
_________________ I want my old sig back 
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Fri Jul 16, 2010 3:52 am |
|
Just to add to the debate ... my Lockwrongs Lockright, at least the one in the rear. On our recent 4200km trip up north I did not hear one click, bang or anything else from the rear diff, nor any squirrely on-road behaviour (possibly due to loaded rear shelves + ball weight of trailer giving tonnes of traction at the rear). That was highway driving plus poodling around town for the missus to gawk at bookshops and the like.
I have adjusted my driving style in the Zook slightly and drive very conservatively on-road in it anyway (not wanting to attract any attention), and I can honestly say that for the most part I forget the rear locker is there. It was quite loud in carparks when first installed but a tube of Nulon G70 and 5000km seems to have fixed that.
Take it as you like 
|
|
|
|
 |
neofitou
Joined: Wed Mar 24, 2010 10:30 pm Posts: 1088 Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy
|
 Posted: Fri Jul 16, 2010 6:55 am |
|
I've got the Spartan too.
Yes I coast around every roundabout.
I'm getting another one for the front.
Auto lockers are crap and illegal dont use them on a road registered car.
Like I do.

|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Fri Jul 16, 2010 9:18 am |
|
Is NCOP the current legislation or is it still in draft form? I've been searching for the regulation relating to locking differentials and can only find it in NCOP, which I had some vague idea wasn't currently in force.
"Permanently locking the differential, including the use of "spools" or welding, to prevent any difference in speed between the wheels on any axle is not permitted. Proprietor "Part-time" differential locking devices are permitted, provided that the driver can control it from the normal seating position."
Unfortunately I don't think they mean "control it" via the throttle 
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Fri Jul 16, 2010 9:20 am |
|
Moph wrote: Is NCOP the current legislation or is it still in draft form? I've been searching for the regulation relating to locking differentials and can only find it in NCOP, which I had some vague idea wasn't currently in force. "Permanently locking the differential, including the use of "spools" or welding, to prevent any difference in speed between the wheels on any axle is not permitted. Proprietor "Part-time" differential locking devices are permitted, provided that the driver can control it from the normal seating position." Unfortunately I don't think they mean "control it" via the throttle 
its always been law.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Fri Jul 16, 2010 9:34 am |
|
joeblow wrote: its always been law.
Cool. Think it was VSI50 I was getting confused with.
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Fri Jul 16, 2010 9:36 am |
|
|
and what bones you more is WA is trialling NCOP - so here, its law.
_________________ 
|
|
|
|
 |
3cyl
Joined: Tue Jan 29, 2008 10:30 pm Posts: 2054 Location: Ipswich
|
 Posted: Fri Jul 16, 2010 9:38 am |
|
|
So that'd make Detroit illegal also, even though they come on some trucks as standard? Now I'll admit I do prefer a manual locker especially on a touring style car, but I ran rear welded on the LJ50 for a while and it was really hard on the gear, twisted axles, broken gearbox / transfer mounts, all running 33hp of 3 cylinder 2 stroke power ( but it was predictable). Attracted lots more attention in carparks and servos than lockrights too.
_________________ awesome only comes in 2 colours, camo & bare metal
|
|
|
|
 |
skelaaleks
Joined: Wed Jun 09, 2010 8:31 am Posts: 237 Location: brissy
|
 Posted: Fri Jul 16, 2010 11:27 am |
|
Ben_Sierra wrote: Welded is more drivable on road than open?
In what way??
car does not get effected by wind as much(trucks and stuff going past)
but basicaly just sitts more settle.
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Fri Jul 16, 2010 11:58 am |
|
skelaaleks wrote: Ben_Sierra wrote: Welded is more drivable on road than open?
In what way?? car does not get effected by wind as much(trucks and stuff going past) but basicaly just sitts more settle.
WTF?
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
|