[birko]

Hey,
Starting my coilpack 1.6 conversion this w/end. Just wondering what ppl have done about the knock sensor when fitting the 1.3 sump? Mounted it elsewhere, modified the sump or bought a aftermarket sensor and mounted on the block somewhere?

Also what brand extractors fit a 93 WT with the bent kit used to fit a coilpack 1.6?

Thanks

[royce]

the thing at the front? thats the crank angle sensor

you either need to weld the section of baleno sump in or get the dump off a late vit / x90 with teh mount for it, joeblow has made mention of that on here before somewhere

[Fatzook]

royce wrote:

the thing at the front? thats the crank angle sensor

you either need to weld the section of baleno sump in or get the dump off a late vit / x90 with teh mount for it, joeblow has made mention of that on here before somewhere

X2.

No knock sensors on a baleno.

As royce said, either cut and shut the baleno sump with a sierra one, or get an X-90 sump.

[birko]

ahah, ok anybody ever cut/shut baleno-sierra one before? pics?

Quote:

get the dump off a late vit / x90 with teh mount for it

?? What is this? sump yer?

[royce]

yeah could be, not well known for looking when I type

[Fatzook]

birko wrote:

ahah, ok anybody ever cut/shut baleno-sierra one before? pics?

Quote:

get the dump off a late vit / x90 with teh mount for it

?? What is this? sump yer?

Moded sierra sump.

[steak_knife]

Did you just go out & take that then Mr fat??

Good on ya!!!

[birko]

Yep, thanks mate. will have a go at it on friday night.

[Fatzook]

steknig wrote:

Did you just go out & take that then Mr fat??

Good on ya!!!

Yep

[birko]

Is this basically where your cut was?

[Fatzook]

birko wrote:

Is this basically where your cut was?

yeah. Just be careful to line the flange up. Otherwise you may get a leak.

[birko]

Hey fatzook,
anymore pics, im looking at both my sumps and i cant make out what you did at the curve bit of the baleno sump if you no what i mean?

Also what extractors for the baleno motor

cheers

[Fatzook]

birko wrote:

Hey fatzook,
anymore pics, im looking at both my sumps and i cant make out what you did at the curve bit of the baleno sump if you no what i mean?

Also what extractors for the baleno motor

cheers

I'll get some during the day tomorrow. I had to 'shape' the sump a little to get the 2 pieces to line up, as they are a slightly different profile from memory.

As for extractors, just use 16v EFI vitara extractors. They are essentially the same head.

Cheers
Peter

PS. I need your phone number for frieght carrier PM me