auszookers.com • View topic - rear pinion flange nut on transfer

Board index » Talking About Stuff » Suzuki Talk

rear pinion flange nut on transfer

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

bj1910

Joined: Sat Mar 06, 2010 10:30 pm
Posts: 22
Location: Brisbane

Posted: Mon Mar 15, 2010 7:14 pm

hi i was wondering weather the rear pinion nut on my 91 wt has normal or reverse thread asit seems really hard to remove compaired to the front ones

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8135
Location: Sunshine Coast Qld

Posted: Mon Mar 15, 2010 7:16 pm

righty tighty... lefty loosey...
I usually bolt a length of steel to the flange and then use a breaker bar and socket with a long piece of pipe.

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Mon Mar 15, 2010 7:19 pm

There are 2 flats machined into the output shaft, and the nut is dented in those locations. That can make it hard to get off.

_________________
SJ50.4.LYF

brendan

Joined: Sun Jul 27, 2008 11:30 pm
Posts: 1484
Location: Sydney

Posted: Mon Mar 15, 2010 7:19 pm

rattle gun and some heat

_________________
navara on 33s. hopfully rear air locker soon

bj1910

Joined: Sat Mar 06, 2010 10:30 pm
Posts: 22
Location: Brisbane

Posted: Mon Mar 15, 2010 7:26 pm

think i might try the welder idea as i do not have an oxy cheers for your input guys now to get it open an put my crawlers in.

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Mon Mar 15, 2010 7:44 pm

I took mine to the local mechanic and he got em off with a rattle gun in 5 seconds flat...

_________________
I want my old sig back

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Mar 15, 2010 8:07 pm

want33s wrote:

righty tighty... lefty loosey...

i work on computers all day i use that one a fair bit when i get around to spinning spanners... :oops:

_________________
You're just hating because you don't understand

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Mar 15, 2010 8:16 pm

atari4x4 wrote:

want33s wrote:

righty tighty... lefty loosey...

i work on computers all day i use that one a fair bit when i get around to spinning spanners... :oops:

I try to teach apprentices that rule to, thay still snap thing tho.. :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum