auszookers.com • View topic - new axle housing, but i dont need the ABS holes...

Board index » Talking About Stuff » Suzuki Talk

new axle housing, but i dont need the ABS holes...

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Thu Oct 23, 2014 8:51 pm

Yo
so i have a new axle housing and diff centre im going to use as a rotable. this will make it easier to install and test everything is ship shape with the caplocker and fullfloat rear so i can just jack the rear of the car, drop out the current axle intact and connect up the new one, with one extra airline being the exception.

axle housing i have however is from a ABS jimny and mine is non-abs
so anyone got any ideas on what to do with said holes?
from what i understand on where they are its on the outside of the axle seal.
weld them up?
screw in pretend ABS sensors to confuse the transport people? (lol cos they do turn up once every 2 years)

any ideas? i assume a grease nipple is just a silly idea, as it would just pump lube into the spindle...?

_________________
your daily dose of questionable sanity

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Oct 23, 2014 8:54 pm

bolt?

_________________
You're just hating because you don't understand

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Thu Oct 23, 2014 9:18 pm

i expected more nipple related comments atari.

_________________
your daily dose of questionable sanity

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Thu Oct 23, 2014 10:47 pm

Just leave the ABS sensor in and cut the wires

_________________
Tell my arse, he actually gives a crap!

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Sat Oct 25, 2014 6:29 am

no sensors in it unfortunately.

_________________
your daily dose of questionable sanity

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Oct 25, 2014 7:32 am

I'd just weld them up.

jimny_timmy

az supporter

Joined: Fri May 13, 2011 1:56 am
Posts: 2326
Vehicle: Suzuki Jimny 2010

Posted: Tue Nov 04, 2014 5:09 am

Weld it up. Bit of brass or copper behind it will make it easier to fill the hole. Bolts would be painful. Whichever way you do it needs to be waterproof... Your rear wheel bearing sits behind it

Page 1 of 1

[ 7 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google Adsense [Bot] and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum