| Author |
Message |
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
 Posted: Fri Jul 08, 2011 7:48 am |
|
|
Im running the 3" Cal setup under my LWB Vit, with a 2" BL, just wondering if a Neg 8 offset will clear 31's without scrubbing.
Also are the factory rims 0 offset???
_________________
Stocker
|
|
|
|
|
atari4x4
az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
Posted: Fri Jul 08, 2011 7:57 am |
|
|
I run Speedy Desert Rat's in a 15" x 7" -15
For future reference, this is what I have on archive for zook rims. Please add any others & maybe we can put it in goodtech
Model Rim Size Offset
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
Vitara 2.0 V6 16" x 6.5" 25P (steel)
Grand Vitara/XL-7 16" x 7" 5P
Jimny 15" x 5.5" 5P
Speedy Desert Rat 15" x 6" -3
Speedy Desert Rat 15" x 7" -15
Speedy Desert Rat 15" x 8" -28
Speedy Desert Rat 16" x 7" 0
ROH Trak II 15" x 7" 3P
ROH Trak II 15" x 8" -10
King 16" x 7" -13
_________________
You're just hating because you don't understand
|
|
|
|
|
SierraDan
az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9347 Location: Newcastle
Vehicle: G13BB Jimny
|
Posted: Fri Jul 08, 2011 8:00 am |
|
atari4x4 wrote: I run Speedy Desert Rat's in a 15" x 7" -15
For future reference, this is what I have on archive for zook rims. Please add any others & maybe we can put it in goodtech
Model Rim Size Offset
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
Vitara 2.0 V6 16" x 6.5" 25P (steel)
Grand Vitara/XL-7 16" x 7" 5P
Jimny 15" x 5.5" 5P
Speedy Desert Rat 15" x 6" -3
Speedy Desert Rat 15" x 7" -15
Speedy Desert Rat 15" x 8" -28
Speedy Desert Rat 16" x 7" 0
ROH Trak II 15" x 7" 3P
ROH Trak II 15" x 8" -10
King 16" x 7" -13
King 15" x 8" -23
_________________
mlm
|
|
|
|
|
monley
az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
Posted: Fri Jul 08, 2011 8:49 am |
|
atari4x4 wrote: I run Speedy Desert Rat's in a 15" x 7" -15
For future reference, this is what I have on archive for zook rims. Please add any others & maybe we can put it in goodtech
Model Rim Size Offset
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
Vitara 2.0 V6 16" x 6.5" 25P (steel)
Grand Vitara/XL-7 16" x 7" 5P
Jimny 15" x 5.5" 5P
Speedy Desert Rat 15" x 6" -3
Speedy Desert Rat 15" x 7" -15
Speedy Desert Rat 15" x 8" -28
Speedy Desert Rat 16" x 7" 0
ROH Trak II 15" x 7" 3P
ROH Trak II 15" x 8" -10
King 16" x 7" -13
King 15" x 8" -23
King 15" x 7" -13
_________________
Tell my arse, he actually gives a crap!
|
|
|
|
|
atari4x4
az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
Posted: Fri Jul 08, 2011 8:55 am |
|
|
thanks crew, there is somewhere on AZ is a list of other factory wheels that also run the same zook PCD
_________________
You're just hating because you don't understand
|
|
|
|
|
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
Posted: Fri Jul 08, 2011 8:58 am |
|
i've got this:
Quote: Model Rim Size Offset
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
Vitara 2.0 V6 16" x 6.5" (alloy)
Grand Vitara 16" x 7" 5P
Jimny 15" x 5.5" 5P
Speedy Desert Rat 15" x 6" -3
Speedy Desert Rat 15" x 7" -15
Speedy Desert Rat 15" x 8" -28
Speedy Desert Rat 16" x 7" 0
ROH Trak II 15" x 7" 3P
ROH Trak II 15" x 8" -10
King 16" x 7" -13
SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE)
OLD F100'S
DIHATSU FEROZA AND ROCKY
LADA NIVA
KIA SPORTAGE AND SORRENTO (NICE ALLOYS)
pretty sure it came off Outers. _________________ 
|
|
|
|
|
atari4x4
az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
Posted: Fri Jul 08, 2011 9:09 am |
|
stocker wrote: Im running the 3" Cal setup under my LWB Vit, with a 2" BL, just wondering if a Neg 8 offset will clear 31's without scrubbing.
Also are the factory rims 0 offset???
Calmini recommend a certain amount of offset, should be written down on the install instructions.
_________________
You're just hating because you don't understand
|
|
|
|
|
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
Posted: Fri Jul 08, 2011 9:15 am |
|
atari4x4 wrote:
Calmini recommend a certain amount of offset, should be written down on the install instructions.
They Reccomend 3" Backspacing... i don't know how to convert Backspace to Offset, i know they are different.
Also CSA Also Run
15 x 7 Neg 6
15 x 7 Pos 10
_________________
Stocker
|
|
|
|
|
atari4x4
az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
Posted: Fri Jul 08, 2011 9:32 am |
|
|
_________________
You're just hating because you don't understand
|
|
|
|
|
atari4x4
az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34843 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
Posted: Fri Jul 08, 2011 9:36 am |
|
monkey wrote: atari4x4 wrote: I run Speedy Desert Rat's in a 15" x 7" -15
For future reference, this is what I have on archive for zook rims. Please add any others & maybe we can put it in goodtech
Model Rim Size Offset
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
Vitara 2.0 V6 16" x 6.5" 25P (steel)
Grand Vitara/XL-7 16" x 7" 5P
Jimny 15" x 5.5" 5P
Speedy Desert Rat 15" x 6" -3
Speedy Desert Rat 15" x 7" -15
Speedy Desert Rat 15" x 8" -28
Speedy Desert Rat 16" x 7" 0
ROH Trak II 15" x 7" 3P
ROH Trak II 15" x 8" -10
King 16" x 7" -13
King 15" x 8" -23
King 15" x 7" -13
CSA 15" x 7" - 6
CSA 15" x 7" + 10
SUZUKI WHEEL STUD PCD PATTERN (5 on 5.5") or (5 on 139.7mm) M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE)
OLD F100'S
DIHATSU FEROZA AND ROCKY
LADA NIVA
KIA SPORTAGE AND SORRENTO (NICE ALLOYS)
_________________
You're just hating because you don't understand
|
|
|
|
|
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
Posted: Fri Jul 08, 2011 9:55 am |
|
That Was Very Very helpful 
Cheers Atari
_________________
Stocker
|
|
|
|
|
missmyljdaze
Joined: Tue Jul 05, 2011 7:16 am Posts: 2323 Location: perth
|
Posted: Sun Jul 10, 2011 6:07 am |
|
|
heres a couple more that have the 5 X 139.7 pattern that I found during research for another project.
The usual Zooks,
F100
F250,
Ford Bronco,
Dodge Rambler,
Daihatsu Scat, Feroza, Rocky, Terrios
Toyota Blizzard,
Jeep- USA production- Bantam, Willys, Ford, MB, GPW, and variants of these.
All CJ series 1946 to 1985 CJ2A, CJ3B, CJ5, CJ6, CJ7, CJ8, J10, J20
Kia Rocsta, Sorento, Sportage
International Harvester Scout,
UAZ,
GAZ469, and variants
Zhanqui BJ212
Lada Niva,
License built CJ3B/ M606 pattern Jeeps- Mahindra (India),Mitsubishi (Japan), Willys (Columbia),Willys Overland (Brazil),Kaiser (Argentina),
Willys Overland (Turkey), Hotchkiss (France), nekaf (Holland), Viasa/ Ebro (Spain)
Hadonghwan(S.Korea), Pas Khodro (Iran)
and if you really want to go upmarket,
Rolls RoyceSilver Cloud and Phantom!
|
|
|
|
|
remydog05
Joined: Sun Nov 23, 2008 10:30 pm Posts: 1260 Location: Vic
|
Posted: Mon Jan 02, 2012 12:53 am |
|
|
|
|
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 12997 Location: Melbourne
|
Posted: Mon Jan 02, 2012 2:40 am |
|
|
Just bear in mind with the fitment guide that just because the rim has 5 on 5.5 PCD, dies not mean it will fit a sierra/vitara.
I have some sportage alloys here and they won't clear the steering arms on a sierra.
Steve.
|
|
|
|
|
steak_knife
az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
Posted: Mon Jan 02, 2012 2:51 am |
|
Gwagensteve wrote: Just bear in mind with the fitment guide that just because the rim has 5 on 5.5 PCD, dies not mean it will fit a sierra/vitara.
I have some sportage alloys here and they won't clear the steering arms on a sierra.
Steve.
& like so the Sv's won't fit Jim's & coiler's....
_________________
I used to be indecisive,
now I'm not so sure.....
|
|
|
|
|
Brett
az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
Posted: Mon Jan 02, 2012 4:07 am |
|
|
my bet is it will be rubbing on full lock neg 25 on a 7 inch rime and neg 23 on a 8 come very close
|
|
|
|
|
SierraDan
az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9347 Location: Newcastle
Vehicle: G13BB Jimny
|
Posted: Mon Mar 05, 2012 6:51 pm |
|
|
Pro Comp offsets as requested by Atari4x4.
15x
7" rim. -6 and -38 offset.
8" rim. -19, -44 and -50 offset.
10" rim. -44 and -76
16x
7" rim. 0 offset.
8" rim. -6 and -50
Other sizes didnt seem practical for the average joe. 10" was added for those who like boggers..
_________________
mlm
|
|
|
|
|
got_bar_work
Joined: Sat May 15, 2010 8:30 pm Posts: 2214 Location: Brisbane
Vehicle: SQ625
|
Posted: Tue Mar 06, 2012 7:45 am |
|
|
King do 15x7 10p which help keep the tire out of the fire wall and rear guard lip but rub on chassis with out adjusting steering stops
|
|
|
|
|
christover1
az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
Posted: Tue Mar 06, 2012 4:32 pm |
|
|
My Dynamic rims are 15 x 7 with a -13 offset
|
|
|
|
|
stockman
az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
Posted: Fri Apr 20, 2012 2:11 pm |
|
|
Could someone confirm the CB on a Sierra and Vitara wheel please.
_________________
Watch out or you'll get sued.
|
|
|
|
|
BlueSuzy
az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9711 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
Posted: Fri Apr 20, 2012 10:27 pm |
|
|
same.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
|
stockman
az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
Posted: Fri Apr 20, 2012 10:37 pm |
|
|
Yeah but what is it?
_________________
Watch out or you'll get sued.
|
|
|
|
|
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
Posted: Fri Apr 20, 2012 11:30 pm |
|
|
108mm
_________________
|
|
|
|
|
BlueSuzy
az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9711 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
Posted: Sat Apr 21, 2012 1:21 am |
|
iamthebestalien wrote: i've got this: Quote:
bla
SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK
bla
pretty sure it came off Outers. Simbo needs glasses  _________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
|
stockman
az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
Posted: Sat Apr 21, 2012 8:25 am |
|
|
I misplaced my monocle.
_________________
Watch out or you'll get sued.
|
|
|
|
|
|
