auszookers.com • View topic - bodylift,WT diffs

Board index » Shift It And Find It » Getting rid of stuff

bodylift,WT diffs

Page 1 of 1

[ 20 posts ]

Print view

Previous topic | Next topic

Author

Message

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 2:18 am

hey all got a few bits up for grabs.Can assist in getting to freight depot etc or see if bluesuzy can help out on his AZ parts trip :lol:

OPEN TO REASONABLE OFFERS

Just cruising bodylift kit,only been in vehicle around 6 months,still in good nic of course and includes all bolts.for a sierra swb $140.00 ono

WT diffs from a 88.5 model first of wide tracks so 3.7 centres but with 4 pin front i believe and still NT flange spacings on diffs.Suit someone doing a WT conversion,will definately need new bearings and seals in front,they appear to have done some mud driving

but tierod,draglink are straight as and both housings are straight and dent free $350.00 ono

Rubber flexiflare extensions allready cut to zuk arch length and drilled.come with screws ready to go,60-65mm cover $40.00 ono

located in tamworth nsw 2340,pickup or can try assist with freight.will be more bits to come.NEED GONE make reasonable offers.all bits still on vehicle at the moment.

Last edited by appsie on Mon Jan 24, 2011 9:27 am, edited 5 times in total.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Jan 15, 2011 2:34 am

_________________
You're just hating because you don't understand

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 2:52 am

haha im new to photobucket gus,is a slow process :lol:

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Jan 15, 2011 2:56 am

looks like you've got it sussed now

_________________
You're just hating because you don't understand

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9711
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Jan 15, 2011 3:03 am

Yep i can assist b4 31st Jan.

Only have a few small bits and a hardtop atm going to qld. Plenty of room.

_________________

BlueSuzy wrote:

I'm over the G16b's.

hutch

az supporter

Joined: Sun Nov 30, 2008 10:30 pm
Posts: 1214
Location: SW Bris

Posted: Sat Jan 15, 2011 7:17 am

PM sent... dibs on the bodylift.

_________________
255 characters

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 8:02 am

pm received bodylift sold pending payment

jakeroberts

Joined: Wed Aug 12, 2009 11:30 pm
Posts: 312
Location: Bundaberg QLD

Posted: Sat Jan 15, 2011 8:24 am

how hard would it be to change the mount on the bar so it fits a sierra without body lift?

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 8:26 am

probably not that hard but it would look funny i say with the side lower bars hanging down lower.make sense??haha

jakeroberts

Joined: Wed Aug 12, 2009 11:30 pm
Posts: 312
Location: Bundaberg QLD

Posted: Sat Jan 15, 2011 8:32 am

doesnt really make sense haha

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 8:35 am

look at the pic of the bar laying face down in the grass.now imagine the notched section up 50mm further and how it would then hang down below the mounting point..

i only say this because i think it possibly would sit too close to the body if put on as is and would maybe hit the body across the front.thats if the mounts were left as is and put on a non lifted cab

jakeroberts

Joined: Wed Aug 12, 2009 11:30 pm
Posts: 312
Location: Bundaberg QLD

Posted: Sat Jan 15, 2011 8:37 am

ohh yeah dw bout it then.. thanks anyway

trite

az supporter

Joined: Tue May 19, 2009 11:30 pm
Posts: 182
Location: sunshine coast
Vehicle: SUZZI

Posted: Sat Jan 15, 2011 11:11 am

wish the bar would fit my vit

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Jan 15, 2011 11:53 am

just buy it and make it fit :lol:

maloo11

Joined: Tue Jul 27, 2010 6:17 am
Posts: 232
Location: NSW

Posted: Mon Jan 17, 2011 1:28 am

pm sent

_________________
91Sierra; 2in lift; 2inBL; 6.5s; 31muds;

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Mon Jan 17, 2011 5:49 am

TUBE BAR SOLD PENDING PAYMENT
Shackles sold pending payment

jesse_vit

az supporter

Joined: Wed Sep 22, 2010 8:57 am
Posts: 324
Location: Gold Coast
Vehicle: stock yellow vit.

Posted: Fri Jan 21, 2011 9:22 am

how much would postage be on the tyres to the gold coast?

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Fri Jan 21, 2011 9:41 am

i wouldnt know exactly mate but would think under $200. i sent 5 x 32 simex on rims to SA for 200 using parry transport.

yellow pages, parry logistics give them a call.5x 30.7kgs

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9711
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Jan 21, 2011 1:30 pm

Jesse_vit $50!!!!!

I can take them next weekend to the goldie for you!!!

Only catch is you have to meet me on (31stjan)monday morning to collect them somewhere.

_________________

BlueSuzy wrote:

I'm over the G16b's.

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Fri Jan 21, 2011 7:29 pm

sorry timmay i forgot about that.cheers mate.

jesse vit shoot us a pm n we will work somethin out

Page 1 of 1

[ 20 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum