| Author |
Message |
needmorelift
Joined: Sat Dec 26, 2009 10:30 pm Posts: 153 Location: Darwin
|
 Posted: Wed Jul 14, 2010 5:25 am |
|
|
anyone got pics of where the lines SHOULD go? i think i might some of mine the wrong way round...
|
|
|
|
 |
needmorelift
Joined: Sat Dec 26, 2009 10:30 pm Posts: 153 Location: Darwin
|
 Posted: Wed Jul 14, 2010 9:23 am |
|
|
no one? also theres a pipe that comes out of the bottom of the fuel pump i dont have anything going into that...does anyone know what is meant to go in there?
|
|
|
|
 |
JrZook
Joined: Tue Aug 08, 2006 11:30 pm Posts: 5517 Location: Holland Park
Vehicle: Awesome!!
|
 Posted: Wed Jul 14, 2010 9:27 am |
|
needmorelift wrote: no one? also theres a pipe that comes out of the bottom of the fuel pump i dont have anything going into that...does anyone know what is meant to go in there?
Nothing it stays open so the diafram can pulsate
_________________ Lil Foot!
http://tiny.cc/gtsw1
|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Wed Jul 14, 2010 9:48 am |
|
|
how about you take some pics and i tell you whats wrong ...
funny story , car yard ... they buy a fuel pump off me , fit it , car still plays up , running out of fuel , their mechanic stuffs around for days , they blame new fuel pump/ faulty etc , i said bring the car to me , pop bonnet , vacuum line fitted to the pipe on fuel pump , hilarious
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Jul 14, 2010 9:53 am |
|
losfer wrote: how about you take some pics and i tell you whats wrong ...
funny story , car yard ... they buy a fuel pump off me , fit it , car still plays up , running out of fuel , their mechanic stuffs around for days , they blame new fuel pump/ faulty etc , i said bring the car to me , pop bonnet , vacuum line fitted to the pipe on fuel pump , hilarious
That's pure gold 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
needmorelift
Joined: Sat Dec 26, 2009 10:30 pm Posts: 153 Location: Darwin
|
 Posted: Wed Jul 14, 2010 10:27 am |
|
yeah sorry stupid memory card in the cam was playing up..
i think this side is fine its the other side closer to rocker cover
bottom left goes to the dizzy and the one above that goes to the charcoal canister and far right goes to some diagphram above the alt??
whats this plug for? :S the old owner went through and ripped all the connections off and half of them are just bare wires now...

|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Wed Jul 14, 2010 10:46 am |
|
|
ok the top 2 are pretty much right , except swap the charcoal canister and dizzy vacuum lines around
that plug is for the anti dieseling solenoid and dash pot , i will try and explain ...
the anti dieseling solenoid cuts fuel to the idle circuit to prevent run on or "dieseling" , the two wires that run to it , one needs power when you turn the ignition on the other is an earth , you should hear it click when you turn the ignition on. without this hooked up the car wont idle , if it does idle , its because someone has removed the solenoid from the carby and cut the end off to disable it , in this case the car will most likely run on when shut off ..
the dash post is an emmision control feature , its to stop "excess hydrocarbons" primarily , it also helps to stabilise idle control. what it does is stop the throttle from snapping shut when the accelerator is released , its a nice feature , but not that important
|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Wed Jul 14, 2010 10:48 am |
|
|
one more thing ..
see the little valve in between the vacuum line on no 1 pic , the green bit should face the other way
|
|
|
|
 |
needmorelift
Joined: Sat Dec 26, 2009 10:30 pm Posts: 153 Location: Darwin
|
 Posted: Wed Jul 14, 2010 10:59 am |
|
|
cheers losfer i'll get onto it...that plug though has a green wire as well as a black one and a white and black wire...am i right in assuming the green needs volts and the other too need to be earthed?
it would kinda explain why it doesnt hold idle
|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Thu Jul 15, 2010 10:20 am |
|
|
|
 |
|