| auszookers.com https://www.auszookers.com/forum/ |
|
| working speedo input shaft.. (or broken transfer case) https://www.auszookers.com/forum/viewtopic.php?f=8&t=31792 |
Page 1 of 1 |
| Author: | ROAR99 [ Thu Apr 12, 2012 4:24 pm ] |
| Post subject: | working speedo input shaft.. (or broken transfer case) |
looking for the shaft that the speedo cable bolts into on the transfer case.. 1.0 switch type or w/t case.. anyone got a broken t,case for parts?? or know where to buy this part new?? brisbane. |
|
| Author: | 303zuke [ Fri Apr 13, 2012 12:06 am ] |
| Post subject: | Re: working speedo input shaft.. (or broken transfer case) |
ROAR99 wrote: ...1.0 switch type or w/t case.. anyone got a broken t,case for parts?? or know where to buy this part new?? Which case? The two ratios in the 2 versions switched cases have their own specific driven gears. See THIS THREAD "On transfer cases where the Hi ratio is 1.409 to 1 and Lo is 2.268 to 1 (All 1.3lt Leafies), the drive gear has 7 teeth and the driven has 20 (2.85:1). On cases with Hi=1.580/ Lo=2.511 (1.0lt w/switch), the teeth are 4 and 12 (3:1)." If you have a 1.0 w/switch case (SJ40 or Maruti), the Suzuki Genuine Part number is 29421-80050. If you have a 1.3 case (NT or WT), the part number is 29421-80451. |
|
| Author: | ROAR99 [ Fri Apr 13, 2012 1:15 pm ] |
| Post subject: | Re: working speedo input shaft.. (or broken transfer case) |
thanks 303zuke for the part no. & info.. ## its a 1ltr case ## rebuild kit is the same as 1.3 so i assumed that part would be the same too. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|