[SuperZook092]

Item Summary: Parting out my 1992 WT Sierra,

Location: NSW: Broke

Postcode: 2330


Asking Price: See below all prices are ONO

Condition: Ranging from used to barely used

Reason for Selling: zook ran out of rego at the end of april and i'm tired of looking at it and getting upset that i can't use it and it would cost me too much to fix it for rego....so i'm parting it out

Delivery Methods: Pick Up or could organise local delivery

Contact Info: pm me or call 0488 290 241 after 3pm (text anytime i'll try my best to answer straight away)

1. SPOA WT Diffs, complete hub to hub, will have fresh paint in the next week as they will be pulled out of the car, all fluids will be drained

2. G13BA engine, mechanically great, just had the timing belt changed and cam seals replaced, starts first kick every time, complete from fan to clutch

3. 5 speed gearbox...mechanically same as engine

4. WT gear driven transfer case....standard gearing, 4wd selector still works great, never jumped out of gear on me

5. Autotechnica 'Repco Special' reclinable racing bucket seats, a little bit of mud on them but scrub up real nice

6. pair of doors, really straight, door trims have been retrimmed in plastic checkerplate

7. rear tintop door, modded for tail lights in the door (got tired of smashing tail lights when out wheeling so this was an easy solution....all wiring has been set up for 'plug-n-play' so hooks up to factory plugs)

8. standard WT leafy exhaust w/ 2 inch tailpipe fitted to muffler (complete from headers to tailpipe)

9. Spidertrax 1" tailshaft spacers comes with bolts were bolted to the car and have only driven from my back yard to front yard

10. standard rear springs with load leaf removed, not wrapped or anything, would suit RUF

11. Lowrange Offroad Stage 1 highsteer comes with bolts, brand spankin new, billet piece that bolts to the knuckle is a little rusty in pics but will be buffed back to new



Prices:
1. SOLD, payment pending (turbo_deo)
2. $250 (or 2,3 &4 for $500)
3. $200
4. $200
5. $300
6. $50
7. $100 w/lights, $70 without
8. $80
9. $60
10. $50
11. SOLD, payment pending (turbo_deo)

will freight at buyers expense!

i'll add some more stuff along with photos tomorrow

Also let me know if you need any specific parts i'll see if i have it

Cheers

Clint

[kirstyandgrace]

I have seen this format for adds on other sites, it doesn't work there so it's not likely to work here either.

Pro tip, chuck up a couple of photos, it sounds like you are selling more than the average bits and bobs

[Teracis]

How many tailshaft spacers have you got?

If there's two can you let me know cost posted to Gold Coast 4226 please?

I'm guessing they are for WT since it's a 92, how are the tailshafts?

[SuperZook092]

I have both front and rear ones mate.....yes they are for WT,

sorry on the tailshafts though.....just sold them yesterday arvo to a mate up here that i go wheelin with

i'll work postage out for you today

Clint

[SuperZook092]

some more items:

- SWB leafy fuel tank, a little dinged up, but hey, any zook that actually gets wheeled is gunna get the tank dented eventually ($50)

- towbar, covered in mud but will be cleaned today if weather holds off ($50)

- 1 Piece rear seat, hasn't been in the car since march when i modded the rear door for the lights and took the seat out to put the spare wheel in the back ($80)

- 4 tyres and wheels, only highway tyres, on sunnies i think 15x7, not sure on offset but the sidewalls are just outside standard WT flares tread is still pretty good on them, little chips and such from wheeling but still good ($450, can throw in spare for extra $50)

- Warrior products Checkerplate sill covers, drivers side has a dent in it, i'll try to fix it today otherwise i'll knock the price down a bit, look gorgeous when polished up ($75)

- leafy bonnet, has 'SUPERZOOK' painted on it (see pics) a couple of dings from playing bulldozer and come off second best....nothing that can't be popped back out though ($100)

- custom front bar, was made for my yr 12 major automotive project because i wanted something that looked stock, but could also take a bit of a beating and wouldn't impair the offroad ability which the stock on did a little bit MIG welded and made out of 5mm cold rolled channel, have actually hit 2 small roos coming home late from work a few days and all it did was take a little bit of paint off the bar so it is quite strong (can cut mounts off the car for a little extra ($150)


i also have some dash parts, and assorted diff bits, so just ask and i'll tell you whether i have it or not

now onto the pics!

the car all these parts are coming off

high steer and a little shot of the front diff


front bar and mounts


tyres and rims

bonnet

tailshaft spacers

seats and the inside of the doors

rear door


if there is any pics that you don't see here and you would like some please contact me and i'll try my best to get them

Clint

[SuperZook092]

forgot to add, the carby on the engine has not long been tuned by Geoff Nichols performance engines here in Singleton

[turbo_deo]

Offset of the rims?

[SuperZook092]

like i said i'm not quite sure on the offset you're more than welcome to come and have a look

Clint

[turbo_deo]

Pmd

[gdaymatee]

Hi mate do you have the front doors still? Im keen on them complete. PM me a price if you still have them,

Thanks.
Bryan

[SuperZook092]

all PM's replied

Clint

[89_tintop]

hey mate got a front drive shaft??

[Bucket]

Pm'd

[Shansh]

mate you have pm

[dave91]

Would have liked to buy it as a whole

How much for the entire cab/body?

[Teracis]

While it's still there, any chance you'd sell the seat rails? I have the same seats but before I got the thing some butcher had welded the drivers side seat rail (I have no idea why it was cut) and I'll need some new seat rails because of this...

[barney7779]

PM sent RE: front bar and Seats.




Teracis- If i grab the seats i will send you my stock drivers seat rails

[Teracis]

barney7779 wrote:

PM sent RE: front bar and Seats.




Teracis- If i grab the seats i will send you my stock drivers seat rails

Awesome dude, I only need one because whoever owned the thing last was rough as!

I can mod it easily for the autotechnica seats, just need something decent to start with...

[s.campbell]

Have PM'd you mate.

[Heideisadog]

2011-2014...
doubting the bits are still for sale!

[Scrawny]

Heideisadog wrote:

2011-2014...
doubting the bits are still for sale!

That's only 3 years old...... should still be good shouldn't it??

[s.campbell]

You'll never know if you dont ask... some of these parts are actually still for sale.

[SuperZook092]

this is my other hardtop that i parted out 3 years ago haha

[shiv]

lol dang.

[russty_2008]

You have pm