| auszookers.com https://www.auszookers.com/forum/ |
|
| Factory tilt gauges for a tin dash sierra https://www.auszookers.com/forum/viewtopic.php?f=7&t=43498 |
Page 1 of 1 |
| Author: | jonno_racing [ Sun Oct 20, 2013 3:19 pm ] |
| Post subject: | Factory tilt gauges for a tin dash sierra |
A set of (presumably rare??) Tin dash tilt gauges. Have never sceen these before, very factory tho, moulded well to dash and have little rag top zooks on them! Only downside is someone had a uhf on them so a few holes. Would look mint in a zook that been bought back to factory condition!   $30 or swap for some widetrack transfer flanges! |
|
| Author: | Ratty562 [ Mon Oct 21, 2013 5:15 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
I'm interested. If you could post to Sydney |
|
| Author: | kritas [ Mon Oct 21, 2013 8:08 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
Rare as hens teeth... |
|
| Author: | jonno_racing [ Mon Oct 21, 2013 8:37 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
yeah a post bag is about $10 from memory? Kritas, was that a joke or are they actually rare? the car they came from had factory rag top doors and a maruti cab so guessing some one went all out when it was bought?? |
|
| Author: | kritas [ Mon Oct 21, 2013 8:49 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
well, the only time I've seen inclinometers for sale was from Thailand on eBay and they all go for $220+shipping or more... Like this one: http://www.ebay.com/itm/JDM-SUZUKI-SAMU ... 7675.l2557 |
|
| Author: | jonno_racing [ Mon Oct 21, 2013 8:53 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
Wow... well then i will be glad some one is going to use a rare part!!  i was a bit sad that some one had attached a UHF to them though!
|
|
| Author: | sideways [ Mon Oct 21, 2013 8:59 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
Yes, they are quite rare. Pity all it will fit is an early 1l though. You sure it was a maruti cab and not a Suzuki one? Sounds like a well optioned up vehicle. Check if it has an LSD. Dibs if it does. 
|
|
| Author: | jonno_racing [ Mon Oct 21, 2013 11:07 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
yeah there mulded to the metal dash.. not sure, how do you tell if the canopy is a suzuki unit or a maruti? i will check on the diff tomorrow morning, from what i have read there a very rare part so i doubt it will be. |
|
| Author: | sideways [ Mon Oct 21, 2013 11:31 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
Does is have a SWB specific filler panel under the cab or is it a hacked LWB one? Check out the trolley tug build for an original hard top. Yeah, LSDs are rare. Still worth checking though, especially if someone went through the options list. |
|
| Author: | jonno_racing [ Mon Oct 21, 2013 11:46 am ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
just had a look, its a lwb filler panel. the one in my coily was SWB and had the cut outs for the wheel tubs.. the doors are either original or put on a LONG time ago, as it has the matching pin striping and were factory tight... the tilt guages were factory... its such a pitty it has more rust than the titanic or i would have cleaned it up, got rego on it and sold it, would have been a cool little camping/stuffing around rig. |
|
| Author: | sideways [ Mon Oct 21, 2013 12:15 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
Yeah, 1ls are like LJs now. All rusty and neglected, hard to find a good one. :/ Btw 2 x000 post counts in 1 thread is pretty awesome! 
|
|
| Author: | jonno_racing [ Mon Oct 21, 2013 12:26 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
yeah i noticed that this morning! tilt guages are SOLD! how ever stay tuned i will check on the LSD tomorow... if it is i want OneHundredBajilionDollars |
|
| Author: | tanshi [ Mon Oct 21, 2013 12:35 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
I sold mine recently for $400 |
|
| Author: | atari4x4 [ Mon Oct 21, 2013 12:51 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
hahahaha, jonno just ripped himself off |
|
| Author: | jonno_racing [ Mon Oct 21, 2013 1:13 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
id say he is talking about the LSD... i would just be happy to see the tilt gauges go into a car and get used! so many rare parts are just thrown away or people hold onto them thinking there worth a bajillion $$ |
|
| Author: | jonno_racing [ Mon Oct 28, 2013 5:47 pm ] |
| Post subject: | Re: Factory tilt gauges for a tin dash sierra |
no lsd sorry guys! unless its loose as a 80yr old escort |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|