auszookers.com
https://www.auszookers.com/forum/

620 sv 1996 wagon part out
https://www.auszookers.com/forum/viewtopic.php?f=7&t=43309
Page 1 of 2

Author:  brchalta [ Mon Oct 07, 2013 6:03 pm ]
Post subject:  620 sv 1996 wagon part out

Hello I am parting out a 1996 sv 620 wagon,motor is tired leaking valve stems.gearbox auto and transfer are fine,springs,consols, shocks and wheels gone.every thing else is there.car is black

doors $50 rear

seats $50 each.sold

towbar $80

front diff $70 sold

rear diff $80

gearbox auto $50 no transfer

transfer box sold

lights front $30 each.sols

radiator $40 sold

fuel tank $60

bumper front + frame $50 sold

motor and electricals eg,injectors,sensors will separate negiotable. sold

throttle body. sold

coil leads. sold

full power steer $250 sold

air con $1oo sold
every thing is negiotable.

located bne northside.

I can be contacted on 0429990597

body and chassis is separated due to some one who wanted chassis but never showed up need it all gone.

Author:  Davidmacca [ Wed Oct 09, 2013 1:47 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Which motor is it

Author:  brchalta [ Wed Oct 09, 2013 2:06 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Davidmacca wrote:
Which motor is it

2litre v6

Author:  Sco-tie [ Thu Oct 10, 2013 12:38 am ]
Post subject:  Re: 620 sv 1996 wagon part out

Did the front diff go with the CVs and axles?

Author:  brchalta [ Thu Oct 10, 2013 1:12 am ]
Post subject:  Re: 620 sv 1996 wagon part out

Sco-tie wrote:
Did the front diff go with the CVs and axles?

sorry yes they did.

Author:  atari4x4 [ Thu Oct 10, 2013 11:19 am ]
Post subject:  Re: 620 sv 1996 wagon part out

how many kms?

Author:  VitNick [ Thu Oct 10, 2013 5:22 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

What type of tow bar is it/ pic? Also chasing the trim piece that goes around the headlight, and rear door panel

Author:  brchalta [ Fri Oct 11, 2013 1:26 am ]
Post subject:  Re: 620 sv 1996 wagon part out

[quote="atari4x4"]how many kms.

260.000 kms

Author:  brchalta [ Fri Oct 11, 2013 1:29 am ]
Post subject:  Re: 620 sv 1996 wagon part out

VitNick wrote:
What type of tow bar is it/ pic? Also chasing the trim piece that goes around the headlight, and rear door panel


not sure how to get pics on.towbar is a hayman reese ,towbar tongue type but wont fit on a swb ,wagon only.but headlight surround and not sure what you mean by rear door panel.my ph no is in the add.

Author:  Lil_Rat [ Sun Oct 13, 2013 9:32 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Carpet? With postage to 6061 perth?

Author:  brchalta [ Sun Oct 13, 2013 10:19 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Lil_Rat wrote:
Carpet? With postage to 6061 perth?

carpet not good enough to send anywhere sorry.

Author:  Lil_Rat [ Mon Oct 14, 2013 8:15 am ]
Post subject:  Re: 620 sv 1996 wagon part out

What about the springs? If they are standard

Author:  brchalta [ Fri Nov 08, 2013 7:35 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Lil_Rat wrote:
What about the springs? If they are standard

springs and shocks gone.

Author:  brchalta [ Wed Nov 27, 2013 11:04 am ]
Post subject:  Re: 620 sv 1996 wagon part out

bump.

Author:  stewfen [ Wed Nov 27, 2013 6:31 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Interested in the air-con mate, in need of the TX valve and condenser, so is it complete?

Author:  brchalta [ Thu Nov 28, 2013 9:42 am ]
Post subject:  Re: 620 sv 1996 wagon part out

ac is all there except the pipe that runs across the front clip under the bonnett.

Author:  brchalta [ Sat Dec 07, 2013 1:24 am ]
Post subject:  Re: 620 sv 1996 wagon part out

bumpppp

Author:  Daly87 [ Sun Dec 08, 2013 5:40 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Hey mate any chance you know if the speedo gauge will fit into the sv420?

Sent from my GT-I9505 using Tapatalk

Author:  brchalta [ Sun Dec 08, 2013 7:07 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

i do have a sv 420 and they do look simular.

Author:  tonka_tuff [ Tue Dec 10, 2013 11:43 am ]
Post subject:  Re: 620 sv 1996 wagon part out

Any chance you have the manual hubs left?? If so how much?

Author:  VitNick [ Tue Dec 10, 2013 12:08 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

Would you post the rear diff center and carrier to Sydney?

Author:  brchalta [ Wed Dec 11, 2013 2:44 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

tonka_tuff wrote:
Any chance you have the manual hubs left?? If so how much?

sorry but it came with auto hubs.

Author:  tonka_tuff [ Wed Dec 11, 2013 8:51 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

brchalta wrote:
tonka_tuff wrote:
Any chance you have the manual hubs left?? If so how much?

sorry but it came with auto hubs.


all good mate thanks anyway!

Author:  brchalta [ Tue Dec 17, 2013 9:33 am ]
Post subject:  Re: 620 sv 1996 wagon part out

bumpppppp.

Author:  mighty_vites [ Wed Dec 18, 2013 4:17 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

latch for the top glove box?
how much?

Author:  brchalta [ Tue Dec 31, 2013 1:19 am ]
Post subject:  Re: 620 sv 1996 wagon part out

mighty_vites wrote:
latch for the top glove box?
how much?

sorry gone yesterday.

Author:  brchalta [ Thu Jan 09, 2014 1:15 am ]
Post subject:  Re: 620 sv 1996 wagon part out

bumppppppppppppppp.

Author:  brchalta [ Tue Jan 21, 2014 7:11 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

bump..........

Author:  brchalta [ Wed Feb 19, 2014 1:17 am ]
Post subject:  Re: 620 sv 1996 wagon part out

bumpppppppppppppppppp

Author:  brchalta [ Thu Apr 10, 2014 1:50 pm ]
Post subject:  Re: 620 sv 1996 wagon part out

bump......................

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/