Prices??
viewtopic.php?f=7&t=29111
| auszookers.com https://www.auszookers.com/forum/ |
|
| Parting out vitara comp truck https://www.auszookers.com/forum/viewtopic.php?f=7&t=38317 |
Page 1 of 1 |
| Author: | preecy [ Mon Jan 14, 2013 7:12 am ] |
| Post subject: | Parting out vitara comp truck |
Parting out my vitara comp truck it has the following 4speed vitara auto to suit g16b. mated to a hilux transfer case with 4.70 low range gears to suit hilux tail shafts .$1700 Hilux Front diff- longfield Axels and CV's , Hp centre , arb airlocker , 5:29 ring n pinion , drive flanges$1800 Front suspension- 12" bills on coils three link with panhard both lowers are 50mm round chromo with creeper joints Hilux Rear diff- chromo Axels ifs width welded 5:29 centre , disc brake conversion $1000 Rear suspenion -16" race runner air shocks $550 Tyres- 37x12.5r17 treps look like stickies but are not . On 17x7 procomp bead lock rims $1500 Steering- chromo hex arms with a p/s box ( have full hydro to put on it ) Seats - autotechnica race seats $200 Call or txt for price and more details. DON'T PM me please 0402 684 318 |
|
| Author: | Rusho [ Mon Jan 14, 2013 7:28 am ] |
| Post subject: | Re: Parting out vitara comp truck |
Prices?? viewtopic.php?f=7&t=29111 |
|
| Author: | 11_evl [ Mon Jan 14, 2013 10:33 am ] |
| Post subject: | Re: Parting out vitara comp truck |
What brand are the diff gears. How much?? |
|
| Author: | Ratty562 [ Mon Jan 14, 2013 2:44 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
I'm interested on the 37" and rims |
|
| Author: | SierraDan [ Mon Jan 14, 2013 2:51 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
Ratty562 wrote: I'm interested on the 37" and rims Get stickies. Or you may as well use your LWB everywhere. |
|
| Author: | Ratty562 [ Mon Jan 14, 2013 2:55 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
SierraDan wrote: Ratty562 wrote: I'm interested on the 37" and rims Get stickies. Or you may as well use your LWB everywhere. That's my plain down the track. I'm after sometbing for the time been. And if there a good price |
|
| Author: | SierraDan [ Mon Jan 14, 2013 3:13 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
Ratty562 wrote: SierraDan wrote: Ratty562 wrote: I'm interested on the 37" and rims Get stickies. Or you may as well use your LWB everywhere. That's my plain down the track. I'm after sometbing for the time been. And if there a good price Havent you got those claws? Seriously.. a 37" non sticky is as good as a 35". Might as well save your coins and get a good tyre than have a bunch of crap ones. |
|
| Author: | Bugsta [ Mon Jan 14, 2013 6:09 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
How much for drive flanges, and posted to Brisbane? |
|
| Author: | preecy [ Tue Jan 15, 2013 8:25 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
11_evl wrote: What brand are the diff gears. How much?? Nitro in the front and standard in the back I think , $1800 front complete and $1000 for the rear complete |
|
| Author: | preecy [ Tue Jan 15, 2013 8:26 pm ] |
| Post subject: | Re: Parting out vitara comp truck |
Bugsta wrote: How much for drive flanges, and posted to Brisbane? Not pulling diffs apart selling complete hub to hub |
|
| Author: | Joe [ Wed Jan 16, 2013 10:57 am ] |
| Post subject: | Re: Parting out vitara comp truck |
Chuck some prices up Preecy |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|