| auszookers.com https://www.auszookers.com/forum/ |
|
| Jimny 50mm lift kit, sold! sold ! https://www.auszookers.com/forum/viewtopic.php?f=7&t=36477 |
Page 1 of 1 |
| Author: | benjlsmith [ Fri Oct 19, 2012 6:41 am ] |
| Post subject: | Jimny 50mm lift kit, sold! sold ! |
all sold |
|
| Author: | speedyblue [ Fri Oct 19, 2012 6:58 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
Intrested. How harsh/soft is the procomp lift compared to others (OME etc)? |
|
| Author: | benjlsmith [ Fri Oct 19, 2012 7:03 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
not sure compared to other brands as I,ve only used procomp, It is a firmer ride than stock though, when i swapped back to stock the jimny felt like a boat especially going round corners. Ill try find some pics of it flexing too. |
|
| Author: | speedyblue [ Fri Oct 19, 2012 7:04 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
How much lift did it actually give? Was this the 50mm kit that lifted the car 80mm? |
|
| Author: | benjlsmith [ Fri Oct 19, 2012 7:26 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
Yeah it initially gave about 80mm, it has settled down to about 50mm lift, I have pics of lift measurement taken just before lift kit was removed it, Measure taken from bottom of alloy wheel to wheel arch rear = 680mm lifted (stock 627mm) front =690 lifted ( 635mm stock) |
|
| Author: | JayKay [ Fri Oct 19, 2012 7:44 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
Hey man, will you be willing to sell the transfer guard separate? |
|
| Author: | benjlsmith [ Fri Oct 19, 2012 7:49 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
Na, not at this stage. |
|
| Author: | JayKay [ Fri Oct 19, 2012 7:55 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
benjlsmith wrote: Na, not at this stage. Fair enough, i'm interested if your mind changes |
|
| Author: | speedyblue [ Fri Oct 19, 2012 8:20 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
I'll give you a call tomorrow. Where abouts on the Coast are you? I'm half way through installing a floor at home, but I'm sure I can duck away for half an hour sometime over the weekend. |
|
| Author: | benjlsmith [ Fri Oct 19, 2012 8:59 am ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
Im in pacific pines |
|
| Author: | kristov [ Fri Oct 19, 2012 8:18 pm ] |
| Post subject: | Re: Jimny 50mm lift kit, and other stuff $500 |
willing to sell brake lines separate? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|