auszookers.com :: View topic - 94 import vitara front cut, 60K, MINT CONDITION

Does your mate have a web site?

What is the liklihood of this opportunity being repeated when jon has more mooney ?

And due to the changes being made in Japan at the moment regarding wrecking yards and their environmental impact ( post Tsunami ), these are getting very hard to find, as wrecking yards close all over the country.

What is needed to make this a bolt on kit so to speak?

Does it come with power steer?

Would this be all I need for the gearbox to the transfer?
http://www.lowrangeoffroad.com/index.ph ... n-kit.html

suzi-fan-22 wrote:

Would this be all I need for the gearbox to the transfer?
http://www.lowrangeoffroad.com/index.ph ... n-kit.html

That would work, but so too would the Aussie made one from Joeblow (aka JML). See the 3rd post down in that thread.

303zuke wrote:

suzi-fan-22 wrote:

Would this be all I need for the gearbox to the transfer?
http://www.lowrangeoffroad.com/index.ph ... n-kit.html

That would work, but so too would the Aussie made one from Joeblow (aka JML). See the 3rd post down in that thread.

joes doesnt come with cross members or tunnel skins i dont think.

Front of the vehicle. From dash forward I believe.

Author:	Fatzook [ Fri Jul 13, 2012 12:38 pm ]
Post subject:	94 import vitara front cut, 60K, MINT CONDITION
Hey all. Its not mine. A mate imports these things when he can get them. Normally I buy them regardless of need, but capitol is a bit low at the moment. Its a late 94 vitara auto 4sp ( AW4 )front cut. Complete and running. Looks as new, and has very low k's. This bloke doesn't import rubbish. And due to the changes being made in Japan at the moment regarding wrecking yards and their environmental impact ( post Tsunami ), these are getting very hard to find, as wrecking yards close all over the country. Price is $2k. Sounds dear, but it is complete with everything you need to do a sierra conversion ( except for fuel tank) and it is a genuinely good motor. This will sell quickly. I am going to see him on Monday, so anyone who is interested should contact me before then. I don't get anything from this deal. Your cash will go direct from you to him. I'm just trying to help out a lucky AZer. Its located in BRISBANE. PM me. Cheers Peter

Author:	Brad.Jones [ Sat Jul 14, 2012 11:54 am ]
Post subject:	Re: 94 improt vitara front cut, 60K, MINT CONDITION
Could be interested but how would freight go to Geelong, Victoria.

Author:	suzi-fan-22 [ Sat Jul 14, 2012 12:52 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Does your mate have a web site?

Author:	Fatzook [ Sat Jul 14, 2012 1:07 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
suzi-fan-22 wrote: Does your mate have a web site? No. He sells 2 40' containers of cuts and motors every month just fine without one.

Author:	jonfromhamilton [ Sat Jul 14, 2012 5:10 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
What is the liklihood of this opportunity being repeated when jon has more mooney ?

auszookers.com https://www.auszookers.com/forum/

94 import vitara front cut, 60K, MINT CONDITION https://www.auszookers.com/forum/viewtopic.php?f=7&t=34127	Page 1 of 1

Author:	Scrawny [ Sat Jul 14, 2012 5:13 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
jonfromhamilton wrote: What is the liklihood of this opportunity being repeated when jon has more mooney ? Probably slim to none I'd say Fatzook wrote: And due to the changes being made in Japan at the moment regarding wrecking yards and their environmental impact ( post Tsunami ), these are getting very hard to find, as wrecking yards close all over the country.

Author:	suzi-fan-22 [ Sun Jul 15, 2012 4:21 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
What is needed to make this a bolt on kit so to speak?

Author:	Fatzook [ Sun Jul 15, 2012 4:23 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
suzi-fan-22 wrote: What is needed to make this a bolt on kit so to speak? Gearbox adaptor, fuel pump, bit of plumbing for the airbox, wiring.

Author:	suzi-fan-22 [ Sun Jul 15, 2012 4:28 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Does it come with power steer?

Author:	Fatzook [ Sun Jul 15, 2012 4:44 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
suzi-fan-22 wrote: Does it come with power steer? Its the complete front end of a jap spec vitara. Comes with everything.

Author:	suzi-fan-22 [ Sun Jul 15, 2012 5:06 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Would this be all I need for the gearbox to the transfer? Would a baleno fuel tank work? I read on here it fits better under the tray. http://www.lowrangeoffroad.com/index.ph ... n-kit.html

Author:	303zuke [ Sun Jul 15, 2012 8:19 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
suzi-fan-22 wrote: Would this be all I need for the gearbox to the transfer? http://www.lowrangeoffroad.com/index.ph ... n-kit.html That would work, but so too would the Aussie made one from Joeblow (aka JML). See the 3rd post down in that thread.

Author:	zooky08 [ Sun Jul 15, 2012 8:26 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
303zuke wrote: suzi-fan-22 wrote: Would this be all I need for the gearbox to the transfer? http://www.lowrangeoffroad.com/index.ph ... n-kit.html That would work, but so too would the Aussie made one from Joeblow (aka JML). See the 3rd post down in that thread. joes doesnt come with cross members or tunnel skins i dont think.

Author:	Fatzook [ Sun Jul 15, 2012 9:48 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
zooky08 wrote: 303zuke wrote: suzi-fan-22 wrote: Would this be all I need for the gearbox to the transfer? http://www.lowrangeoffroad.com/index.ph ... n-kit.html That would work, but so too would the Aussie made one from Joeblow (aka JML). See the 3rd post down in that thread. joes doesnt come with cross members or tunnel skins i dont think. Not AFAIK. The trail tough kit is good. I've used it myself.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	Fatzook [ Mon Jul 16, 2012 11:14 am ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Sold.

Author:	jwc [ Tue Jul 17, 2012 6:32 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
can you possibly ask him about getting a ecu for a 88 vitara e-TA01R 33920-60A60

Author:	Fatzook [ Tue Jul 17, 2012 6:35 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
No chance mate. You need to contact NZ wreckers. TBI vitara front cuts are unheard of in japan.

Author:	tonyevans [ Wed Jul 18, 2012 9:57 am ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
OK - I'm old and stupid - What is a front cut? I assume part of the vehicle???

Author:	reeceh [ Wed Jul 18, 2012 11:01 am ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Front of the vehicle. From dash forward I believe.

Author:	Fatzook [ Wed Jul 18, 2012 12:54 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
reeceh wrote: Front of the vehicle. From dash forward I believe. Usually they cut the windscreen off at the base of the a-pillar, roof and doors are gone, and the floor is cut just after the gearbox.

Author:	tonyevans [ Wed Jul 18, 2012 1:10 pm ]
Post subject:	Re: 94 import vitara front cut, 60K, MINT CONDITION
Thanks guy's - I guess that makes sense in this age of computer shit and stuff - I hate it - A carby I can usually get going in the bush but all this electrics stuffs me up and there are not many tow trucks out here.