| auszookers.com https://www.auszookers.com/forum/ |
|
| wrecking 98 jimny, Cheep, must all go! https://www.auszookers.com/forum/viewtopic.php?f=7&t=31560 |
Page 1 of 2 |
| Author: | jonno_racing [ Sat Mar 31, 2012 3:56 pm ] |
| Post subject: | wrecking 98 jimny, Cheep, must all go! |
parting, g13bb jimny. (soft top) 90% parts avalable. complete g13bb conversion. can thin loom and make "nearly" plug in wiring extra. complete power steering set up (straight bolt in to sierra, no addapter kit required) etc etc. all prices neg. freight easaly sorted through eGo first in first served. Phil. Motor, Power steering SOLD! everything else still avalabe! and prices are NEG.. ![]() ![]() ![]() ![]() Factory jimny soft top, actualy survived the crash!!!! since i have only sceen one softy jim i guess it will be chucked out ![]() ![]() ![]()
|
|
| Author: | jonno_racing [ Sat Mar 31, 2012 5:44 pm ] |
| Post subject: | Re: wrecking 98 jimny |
just relised I forgot prices.. oops g13bb, wiring, computer for sierra conversion $550 started up and ran fine, 150,000 SOLD power steering, pump, lines, box $450 neg, this bolts directly in2 a sierra, no conversion kit required. SOLD gearbox, clicks through gears. car is undrivable due to crash $70? transfer, stick job, same as gearbox $50 front diff, drum to drum $125 f/r tailshafts $40 each. Font in fucked center console $30 from memory these fit straight into a sierra. farked anything more feel free to ask, will be selling everything cheep due to short time wrecking. |
|
| Author: | dougies_tx5turbo [ Sat Mar 31, 2012 6:24 pm ] |
| Post subject: | Re: wrecking 98 jimny |
pm sent about transfer boot cover and the metal plating that holds it down, gear box and transfer case thanks Doug |
|
| Author: | tuffcoily [ Sat Mar 31, 2012 7:26 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Do you have the rear diff as well and what ratio are they |
|
| Author: | xedent [ Sat Mar 31, 2012 8:17 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Ill take the PS setup depending on postage cost!! Pm sent! |
|
| Author: | jonno_racing [ Sat Mar 31, 2012 8:53 pm ] |
| Post subject: | Re: wrecking 98 jimny |
pms replied can any one tell me what 2 private messages were removed due to private message filters meens? |
|
| Author: | Brenno [ Sun Apr 01, 2012 7:42 am ] |
| Post subject: | Re: wrecking 98 jimny |
Wouldn't you be the power steering in yours? |
|
| Author: | jonno_racing [ Sun Apr 01, 2012 7:53 am ] |
| Post subject: | Re: wrecking 98 jimny |
Brenno wrote: Wouldn't you be the power steering in yours? I was considering it, however coin is tight atm, and I realy don't feel the need for it. I have no plan to go any bigger rubber. I find the steering quite lightish. so at this point in time id prefer bills paid to ps. |
|
| Author: | reallyuted [ Sun Apr 01, 2012 8:47 am ] |
| Post subject: | Re: wrecking 98 jimny |
pm sent |
|
| Author: | jonno_racing [ Sun Apr 01, 2012 9:20 am ] |
| Post subject: | Re: wrecking 98 jimny |
next round of pms replied to. |
|
| Author: | oldcob [ Sun Apr 01, 2012 5:41 pm ] |
| Post subject: | Re: wrecking 98 jimny |
if xedent doesnt take the power steering setup I will take it. |
|
| Author: | Stevo87 [ Mon Apr 02, 2012 7:32 am ] |
| Post subject: | Re: wrecking 98 jimny |
How much for rhs mirror |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 10:07 am ] |
| Post subject: | Re: wrecking 98 jimny |
mirrors are fubar sorry. all pms replied to again. |
|
| Author: | BlueSuzy [ Mon Apr 02, 2012 10:14 am ] |
| Post subject: | Re: wrecking 98 jimny |
will you post the bonnet? |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 10:27 am ] |
| Post subject: | Re: wrecking 98 jimny |
BlueSuzy wrote: will you post the bonnet? unlike some stupid people I can organise freight. but the bonnet is going on my Jim. please keep this on track. |
|
| Author: | BlueSuzy [ Mon Apr 02, 2012 10:38 am ] |
| Post subject: | Re: wrecking 98 jimny |
stupid |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 4:23 pm ] |
| Post subject: | Re: wrecking 98 jimny |
power steering sold pending payment. |
|
| Author: | birko [ Mon Apr 02, 2012 7:59 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Pics of console? |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 10:04 pm ] |
| Post subject: | Re: wrecking 98 jimny |
I will get one for you mate. |
|
| Author: | birko [ Mon Apr 02, 2012 10:09 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Thanks |
|
| Author: | suzooky87 [ Mon Apr 02, 2012 10:30 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Still got rear diff? What ratio? |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 10:51 pm ] |
| Post subject: | Re: wrecking 98 jimny |
I do however the rear housing is snaped in half. and the axel snapped in there. so id say its fubar. |
|
| Author: | atari4x4 [ Mon Apr 02, 2012 11:00 pm ] |
| Post subject: | Re: wrecking 98 jimny |
jonno_racing wrote: I do however the rear housing is snaped in half. and the axel snapped in there. so id say its fubar. wow, was it damaged in an accident or just failed? pics |
|
| Author: | suzooky87 [ Mon Apr 02, 2012 11:09 pm ] |
| Post subject: | Re: wrecking 98 jimny |
How about the centre, is there any chanse you could check it? |
|
| Author: | jonno_racing [ Mon Apr 02, 2012 11:36 pm ] |
| Post subject: | Re: wrecking 98 jimny |
apparently the busting housing caused the crash! I will have a look. |
|
| Author: | atari4x4 [ Mon Apr 02, 2012 11:37 pm ] |
| Post subject: | Re: wrecking 98 jimny |
struth... monkey's next failure! |
|
| Author: | monley [ Mon Apr 02, 2012 11:54 pm ] |
| Post subject: | Re: wrecking 98 jimny |
atari4x4 wrote: struth... monkey's next failure! That's why I braced the rear diff |
|
| Author: | jonno_racing [ Tue Apr 03, 2012 12:02 am ] |
| Post subject: | Re: wrecking 98 jimny |
I will post up pics of carcouse before it go's to crush. |
|
| Author: | jonno_racing [ Tue Apr 03, 2012 12:00 pm ] |
| Post subject: | Re: wrecking 98 jimny |
Motor sold pending payment. |
|
| Author: | kyzermattingley [ Thu Apr 05, 2012 7:56 am ] |
| Post subject: | Re: wrecking 98 jimny |
Is the transfer still available and where abouts are you? Kyzer |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|