auszookers.com :: View topic - Suzuki Parts Purge (LJ, SJ, SE)

Will you post the vitara hubs? and do ya have the cone shaped washer things with them?

I'll take all the 1.3 diff rear side gears (26 spline) that you have.
PM price including postage to 4560 please.

Do you reckon the G16B sump will work in a baleno to sierra conversion? Is the pickup correct and do you have the dipstick?

I ask as I am going to be doing one when I get home and not having to cut and shut a sump would be one less job to do!

Intrested in sump N pick-up if you have'nt sold it.
Pmd

hey mate would ya post a pair of the 26 spline side gears for making open front centres chromo compatible? to 3337!

cheers bud

Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10

Highway-Star wrote:

Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10

Got a pic of this one?

I'll take the WT output flange. How much including postage to 2444 NSW ?

any vitara front wheel bearing nuts?

zukenutter wrote:

Highway-Star wrote:

Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10

Got a pic of this one?

I'll get one this afternoon.

Cheers but not what I was hoping for

zukenutter wrote:

Cheers but not what I was hoping for

Can you describe what your after? I have a few other odd bits laying around.

Oh right, Jimny VSS requirements I presume. Yeah sorry I got nothing

any chance when the body parts come out to be seen

viewtopic.php?f=8&t=30841

Side gears arrived yesterday. Cheers.

Any WT SWB Sierra tail shafts?

Author:	Highway-Star [ Sat Feb 25, 2012 11:17 am ]
Post subject:	Suzuki Parts Purge (LJ, SJ, SE)
Some assorted drive train and steering bits I've decided I don't want/need. All prices are negotiable, and I am happy for people to ask if I have other things laying around I don't want that sort of match the theme of what am selling (ie, no jumping castles! )... Currently I am quite busy and unable to post items, sorry. LJ parts: - LJ80/LJ81 rear diff assembly. Non-stockman type, 4.5 22spline diff centre. $50 - Lots of LJ80/81 (stockman or not, doesn't matter) front axle shafts with 1Litre Sierra CV's on them. Ready to go for a disk brake conversion on your front end. Some have been speedy sleeved due to grooves on the seal surface, and some have some play in the CV's. $50 each, less for flawed examples. Also have some bare shafts with no CV's and some with original drum CV's on them. Most sold, a few remaining - Numerous LJ50/80/81 Transfer Cases, both ratio types (2.5:1 or 3.0:1). Ranging in condition from complete (though recommend 3 new seals to be safe), through to cases suitable for stripping and selling individual bits off of. $100 for a complete case, or happy for people to ask about parts off of one of my incomplete ones. Some sold, some remaining - Assorted F8a engine parts. I have most bits, so let me know what your after and I can get back to you. - LJ50 early type steel parcel shelf. $20 - LJ50 type 1 original front bumper bar. a bit beat up but not rusty, needs a panel beat. $20. Sold pending payment - LJ50 type 1, 2 bolt light front panel. Is a bit out of shape, but only surface rust. $50. SJ parts: - Pair of Sierra half doors. Painted Orange. See photo below. $100 the pair. - Pair of Sierra wind up windows (go in doors). With Tint. $50 the pair. - 3.7 crown and pinion from front of a WT, still with single pin 22 spline carrier attached. Free - 4 pin front 22 spline 1.3 size carrier Free - Some sort of high steer arm. Bolts in place of passenger side king pin. I recomend if your interested you come look at it, I don't know who made it, where it came from etc.... $10 Other: - Set of 4 alloy wheels. 15x8. See photo. $500 the set. Some Pics: LJ CV's/shafts Line up of LJ transfers..... LJ50 parcel tray: LJ50 panel: High steer arm: Half doors: alloy wheels:

Author:	Joe [ Sat Feb 25, 2012 12:05 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Will you post the vitara hubs? and do ya have the cone shaped washer things with them?

Author:	Highway-Star [ Sat Feb 25, 2012 1:13 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Joe wrote: Will you post the vitara hubs? and do ya have the cone shaped washer things with them? Yeah, they are nice and easy to post. No cones or bolts with them, but I can grab some off some spare Sierra hubs. PM me your suburb and post code, and I'll get a post cost Monday

Author:	Teracis [ Sat Feb 25, 2012 4:00 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Do you reckon the G16B sump will work in a baleno to sierra conversion? Is the pickup correct and do you have the dipstick? I ask as I am going to be doing one when I get home and not having to cut and shut a sump would be one less job to do!

Author:	want33s [ Sat Feb 25, 2012 4:16 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
I'll take all the 1.3 diff rear side gears (26 spline) that you have. PM price including postage to 4560 please.

auszookers.com https://www.auszookers.com/forum/

Suzuki Parts Purge (LJ, SJ, SE) https://www.auszookers.com/forum/viewtopic.php?f=7&t=30720	Page 1 of 2

Author:	Mickc [ Sat Feb 25, 2012 10:38 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Intrested in sump N pick-up if you have'nt sold it. Pmd

Author:	Highway-Star [ Sat Feb 25, 2012 11:52 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
want33s wrote: I'll take all the 1.3 diff rear side gears (26 spline) that you have. PM price including postage to 4560 please. Will do Monday when I look at the posting for Joe too Teracis wrote: Do you reckon the G16B sump will work in a baleno to sierra conversion? Is the pickup correct and do you have the dipstick? I ask as I am going to be doing one when I get home and not having to cut and shut a sump would be one less job to do! Mickc wrote: Intrested in sump N pick-up if you have'nt sold it. Pmd OK the sump. Its the same as a Vitara sump, but has a provision for a crank angle sensor in the front which is nice for a Baleno conversion. I put a Sierra sump on my engine, as the Vitara sump would hit my diff; however some of you guys run your diffs further forward, spring overs etc etc which allows the Vitara sump to clear and work happily. The pickup has been cut right near the block, so will still need to be joined with the original Baleno top piece (you have to do this whenever you fit a Sierra sump to a G16 anyway). If this is all cool with you, it will save you moding the sump pan though . No dipstick sorry. Mick, I haven't got your PM . Happy for you to call me if you still have my number though

Author:	Teracis [ Sun Feb 26, 2012 1:25 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
No worries, I haven't moved my diff at all so I'll just mod my sierra one, cheers for the info though!

Author:	suzukikid [ Sun Feb 26, 2012 6:02 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
hey mate would ya post a pair of the 26 spline side gears for making open front centres chromo compatible? to 3337! cheers bud

Author:	Highway-Star [ Sun Feb 26, 2012 6:16 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
suzukikid wrote: hey mate would ya post a pair of the 26 spline side gears for making open front centres chromo compatible? to 3337! cheers bud Sorry mate, want33's has got in first. If he changes his mind for any reason I'll let you know.

Author:	suzukikid [ Sun Feb 26, 2012 7:00 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
stuff him! haha too easy bloke......maybe ill buy a set off him! let me know if anything changes! cheers bloke

Author:	boostedbrick [ Sun Feb 26, 2012 9:29 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Ill take the sump if the other bloke doesnt grab it

Author:	Highway-Star [ Wed Feb 29, 2012 4:13 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
bump... Going to start filling the trailer this weekend for a dump trip, some of this stuff will go...

Author:	zukenutter [ Wed Feb 29, 2012 9:57 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Highway-Star wrote: Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10 Got a pic of this one?

Page 1 of 2	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	Highway-Star [ Thu Mar 01, 2012 4:15 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
zukenutter wrote: Highway-Star wrote: Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10 Got a pic of this one? I'll get one this afternoon.

Author:	dono1 [ Thu Mar 01, 2012 3:06 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
I'll take the WT output flange. How much including postage to 2444 NSW ?

Author:	jonno_racing [ Thu Mar 01, 2012 3:11 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
any vitara front wheel bearing nuts?

Author:	Highway-Star [ Thu Mar 01, 2012 3:20 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
dono1 wrote: I'll take the WT output flange. How much including postage to 2444 NSW ? Bother I just got back from the post office too.... At a guess it will be somewhere between 10 and 20 to post, will verify and send you a PM tomorrow . jonno_racing wrote: any vitara front wheel bearing nuts? Sorry, no good ones.

Author:	Highway-Star [ Thu Mar 01, 2012 3:55 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Highway-Star wrote: zukenutter wrote: Highway-Star wrote: Widetrack transfer rear output flange (the odd one that replaced the transfer handbrake). $10 Got a pic of this one? I'll get one this afternoon. Pics for Mr Nutter I've got 2 of them, so if dono1 buys one, there is still another here.

Author:	zukenutter [ Thu Mar 01, 2012 4:03 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Cheers but not what I was hoping for

Author:	Highway-Star [ Thu Mar 01, 2012 4:26 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
zukenutter wrote: Cheers but not what I was hoping for Can you describe what your after? I have a few other odd bits laying around.

Author:	zukenutter [ Thu Mar 01, 2012 4:56 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Highway-Star wrote: zukenutter wrote: Cheers but not what I was hoping for Can you describe what your after? I have a few other odd bits laying around. Still need the removable cup but the step down shown below is wrong for my needs.

Author:	Highway-Star [ Thu Mar 01, 2012 5:10 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Oh right, Jimny VSS requirements I presume. Yeah sorry I got nothing

Author:	zukenutter [ Thu Mar 01, 2012 5:17 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Highway-Star wrote: Oh right, Jimny VSS requirements I presume. Yeah sorry I got nothing Thanks anyway

Author:	MrRocky [ Thu Mar 01, 2012 8:24 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
any chance when the body parts come out to be seen viewtopic.php?f=8&t=30841

Author:	Highway-Star [ Thu Mar 01, 2012 8:43 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
MrRocky wrote: any chance when the body parts come out to be seen viewtopic.php?f=8&t=30841 Sorry, I don't do soft tops (except Sierras, and that was a mistake! ). You'll probably have a hard time finding a good one. You can get reproduction ones, but I don't know anyone who has actually bought one..... http://www.citroa.com/suzuki/lj-80-series/

Author:	MrRocky [ Thu Mar 01, 2012 8:49 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
sigh spose i could just spend a w/end welding new steel in cheers anyway, those panels look the goods but must cost $$$ for shipping

Author:	want33s [ Sat Mar 03, 2012 3:52 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Side gears arrived yesterday. Cheers.

Author:	sogone [ Mon Mar 05, 2012 7:59 am ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
Any WT SWB Sierra tail shafts?

Author:	Highway-Star [ Mon Mar 05, 2012 3:05 pm ]
Post subject:	Re: Drive Train Parts Purge (LJ, SJ, SE)
want33s wrote: Side gears arrived yesterday. Cheers. Good to hear! sogone wrote: Any WT SWB Sierra tail shafts? Sorry, I sort of need the one that makes my car go and its the only one I have.