It is currently Sun May 03, 2026 8:30 pm
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 36 posts ]  Go to page 1, 2  Next
Author Message

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 08, 2010 9:07 am 
Reply with quote Top  
Thought i would update the list of parts i still have.


Now that i have bought a GV i can offload all the spare Sierra parts i have collected over the last 7 years. Pick up is perfered but i could post the smaller bits at exrra cost.

Complete High Compression motor. (1298 pistons on 1324 crank) missing water pump and timing belt. Rebuilt nov 09. Suit EFI $500
Rear drums $5
Sierra gearbox ok i think $50
1324 short motor suit rebuild $20
Diff ctrs
1x3.9 front $75
1x3.7 front $75
1x3.7 rear $75
Assorted motor parts.rocker covers, timing belt covers, engine bkts,manifolds etc. $ make offer
Softtop wheel carrier $10
1.3 Radiator. was reco'd but fan has touched it
WT dash and clusters. $25
windscreen frame. some rust $50
Assorted leaf springs. some lifted. most stock. $ ask what i got
2x fuel tanks. some dents but nothing major. $30 each
Dizzy x3 $20 each give you a free coil with it too
WT transfer arms. have been strengthened. $30SOLD
sierra mastercly and brake booster $20
Forrester Master Cly on sierra booster.. suit brake upgrade to rear disc and Vitara calipers/rotors. has bigger bore (1 1/16) and is set for rear disc. No need for a proportioning valve $100
assorted brake bits. $?
Weber Carby with airbox adaptor and pipe...$150
Glovebox....$20
2x Radio/heater surounds....$10
1ltr carby and inlet manifold...$50



Dont have pics but most people know what things look like or they wouldnt be buying it.


Pm or ph 0408287539

Pick up from dandenong most nights or weekends.


B4T

_________________
B4T


Built by me to be driven like a rental


Last edited by Built4thrashing on Wed Nov 10, 2010 6:55 am, edited 11 times in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 29, 2008 10:30 pm
Posts: 596
Location: Mt Evelyn Vic

Post Posted: Fri Oct 08, 2010 10:31 am 
Reply with quote Top  
I'll take the steering box off ya Jas, I call you tomorrow arvo after my Sister's kids party in Emerald and i'll swing past on my way home if your around? Robb.

_________________
Bitumen...Another waste of public funds!

 Profile WWW  

Offline
User avatar

Joined: Fri Feb 06, 2009 10:30 pm
Posts: 490
Location: S.E melb

Post Posted: Fri Oct 08, 2010 10:47 am 
Reply with quote Top  
Got pics of the rollbars?

 Profile  

Offline
User avatar

Joined: Tue Mar 11, 2008 10:30 pm
Posts: 2123
Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..

Post Posted: Fri Oct 08, 2010 11:25 am 
Reply with quote Top  
keen on nething fittable jas. ;) with any luck will hav $$ next week if ya fancy doing an engine swap? Im workin tomoz if you want to call in and see the boss about the tires to.. ;)

 Profile  

Offline
User avatar

Joined: Tue Aug 17, 2010 5:02 am
Posts: 266
Location: Melbourne

Post Posted: Fri Oct 08, 2010 11:56 am 
Reply with quote Top  
Ill take the alloy bar Jase as discussed, ill come over this weekend or next if its cool with you.

_________________
95 Sierra, SPOA, 33 JT2s, 5.12s.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 08, 2010 7:34 pm 
Reply with quote Top  
Im about today but will be out at a mates getting spastic watching bathurst tomorrow.

Ring me.



B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Fri Oct 08, 2010 8:01 pm 
Reply with quote Top  
I'll take the discs if they'll fit an NT

also keep a selection of springs for me ;)

 Profile  

Offline

Joined: Tue Jul 27, 2010 6:17 am
Posts: 232
Location: NSW

Post Posted: Sat Oct 09, 2010 7:09 am 
Reply with quote Top  
Complete High Compression motor. (1298 pistons on 1324 crank) missing water pump and timing belt. Rebuilt nov 09. Suit EFI $500

Will this go straight into a stock sierra? Come wiith carb, starter etc.

_________________
91Sierra; 2in lift; 2inBL; 6.5s; 31muds;

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sat Oct 09, 2010 7:11 am 
Reply with quote Top  
no starter or carby. you need to use your own. Waiting to hear back from someone as they got first dibs on this. around x/mas i will have another motor available.


B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 05, 2010 10:30 pm
Posts: 100
Location: Bendigo

Post Posted: Sat Oct 09, 2010 9:53 pm 
Reply with quote Top  
Pm Sent

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sun Oct 10, 2010 7:36 am 
Reply with quote Top  
PM's replied to


B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sun Oct 10, 2010 9:13 am 
Reply with quote Top  
Found a few other bits today i forgot i had.
I have a gearbox here for free. Suit rebuilt.
weber carby with float mods with airbox adaptor and intake pipe. $200ono
assorted alternators. some in bits..free



Make me offers on everything as i need it gone to buy bits for the GV

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 48
Location: Horsham

Post Posted: Sun Oct 10, 2010 9:00 pm 
Reply with quote Top  
pics of steel bar?

 Profile  

Offline
User avatar

Joined: Tue Mar 11, 2008 10:30 pm
Posts: 2123
Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..

Post Posted: Mon Oct 11, 2010 5:39 am 
Reply with quote Top  
plans for this sat. after 12:30 B4T.? If i get the zuki to work without carbon monoxiding myself out, we can tinker in the afternoon if your free...?

_________________
Roads... Where we're going we dont need Roads....

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon Oct 11, 2010 8:24 am 
Reply with quote Top  
Parts update.
sold some but still alot here.


B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Oct 13, 2010 5:14 am 
Reply with quote Top  
Complete High Compression motor. (1298 pistons on 1324 crank) missing water pump and timing belt. Rebuilt nov 09. Suit EFI $500

1.3 head. reco'd 10,000km before engine was pulled out has cam in it. $100
cam shaft.. $20
New sierra Disc rotors x 2. never used. $50 SOLD pending pick up
Rear drums $FREE
Sierra gearbox ok i think $50
Gearbox suit rebuild..2nd gear grings on changes..$FREE
1324 short motor suit rebuild $20
Diff ctrs 1x3.9 front $751x3.7 front $75
1x3.7 rear $75 sold awaiting pickup
Assorted motor parts.rocker covers, timing belt covers, engine bkts,manifolds etc. $ make offer
1.3 stock carbys. $10
Softtop wheel carrier $10
1.3 Radiator. was reco'd but fan has touched it $ 30WT dash and clusters. $25
Soft top Windscreen souround with glass. E/C $200
windscreen frame. some rust $50
Assorted leaf springs. some lifted. most stock. $ ask what i got
2x fuel tanks. some dents but nothing major. $30 each
Dizzy x3 $10 each give you a free coil with it too
rear bumpers. x2 $20 each SOLD
WT transfer arms. have been strengthened. $30SOLD
sierra mastercly and brake booster $20
Forrester Master Cly on sierra booster.. suit brake upgrade to rear disc and Vitara calipers/rotors. has bigger bore (1 1/16) and is set for rear disc. No need for a proportioning valve $100
assorted brake bits. $?
alloy roll bar $50. (SOLD pending pick up)

Dont have pics but most people know what things look like or they wouldnt be buying it.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 13, 2009 10:30 pm
Posts: 739
Location: Hoppers Crossing
Vehicle: 95 Sierra Soft top

Post Posted: Wed Oct 13, 2010 8:10 am 
Reply with quote Top  
PM Sent 8)

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 15, 2010 4:26 am 
Reply with quote Top  
anyone that sent me PM's after parts can you re send your PM as i accidently deleted them. Cant remember who wanted what.


Sorry guys

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 331
Location: Adelaide
Vehicle: SJ80

Post Posted: Fri Oct 15, 2010 5:56 am 
Reply with quote Top  
Do you happen to know what year suzuki the windscreen surround + glas is from?
Need a new one for my coily - not sure if they are the same?

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 15, 2010 6:54 am 
Reply with quote Top  
It came off a 91 WT sierra.
dunno if its the same ?

Postage to Adelaide will kill you

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 15, 2010 8:47 pm 
Reply with quote Top  
bump

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Tue Aug 17, 2010 5:02 am
Posts: 266
Location: Melbourne

Post Posted: Fri Oct 15, 2010 11:05 pm 
Reply with quote Top  
Can i pop past tomorrow morning Jase?

_________________
95 Sierra, SPOA, 33 JT2s, 5.12s.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sat Oct 16, 2010 2:48 am 
Reply with quote Top  
Complete High Compression motor. (1298 pistons on 1324 crank) missing water pump and timing belt. Rebuilt nov 09. Suit EFI $500
1.3 head. reco'd 10,000km before engine was pulled out has cam in it. $100 SOLDcam shaft.. $20
New sierra Disc rotors x 2. never used. $50 SOLD pending pick up
Rear drums $FREE
Sierra gearbox ok i think $50

1324 short motor suit rebuild $20
Diff ctrs
1x3.9 front $75
1x3.7 front $75
1x3.7 rear $75
sold awaiting pickup
Assorted motor parts.rocker covers, timing belt covers, engine bkts,manifolds etc. $ make offer
1.3 stock carbys. $10
Softtop wheel carrier $10
1.3 Radiator. was reco'd but fan has touched it $ 30WT dash and clusters. $25
Soft top Windscreen souround with glass. E/C $200 SOLD
windscreen frame. some rust $50
Assorted leaf springs. some lifted. most stock. $ ask what i got
2x fuel tanks. some dents but nothing major. $30 each
Dizzy x3 $10 each give you a free coil with it too
rear bumpers. x2 $20 each SOLD
WT transfer arm.Long side only . has been strengthened. $30
sierra mastercly and brake booster $20
Forrester Master Cly on sierra booster.. suit brake upgrade to rear disc and Vitara calipers/rotors. has bigger bore (1 1/16) and is set for rear disc. No need for a proportioning valve $100

assorted brake bits. $?

Dont have pics but most people know what things look like or they wouldnt be buying it.

_________________
B4T


Built by me to be driven like a rental


Last edited by Built4thrashing on Fri Nov 05, 2010 6:32 am, edited 2 times in total.
 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon Oct 18, 2010 5:38 am 
Reply with quote Top  
More stuff

Drop Shackles. $100 SOLD
rear disc conversion bits...These are machined rear drums. will fit inside back of disc and bolts onto axle stude....$100 SOLD
Weber Carby with airbox adaptor and pipe...$150
Glovebox....$20
2x Radio/heater surounds....$10
1ltr carby and inlet manifold...$50

Plus some pics of already advertised bits

Image
Image
Image
Image
Image
Forester master on sierra booseter
Image
Windscreen and Frame perfect cond
Image
High comp motor
Image

_________________
B4T


Built by me to be driven like a rental


Last edited by Built4thrashing on Fri Nov 05, 2010 6:29 am, edited 3 times in total.
 Profile  

Offline
User avatar

Joined: Tue Mar 11, 2008 10:30 pm
Posts: 2123
Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..

Post Posted: Tue Oct 19, 2010 5:53 am 
Reply with quote Top  
will take the head if it is complete jas. Home this weekend? Alternatively, MAY be able to call in tomorrow after work.. can leave the $ with the other half or deposit directly to ya..

_________________
Roads... Where we're going we dont need Roads....

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Oct 22, 2010 5:00 am 
Reply with quote Top  
Bump

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 331
Location: Adelaide
Vehicle: SJ80

Post Posted: Mon Nov 01, 2010 10:49 am 
Reply with quote Top  
Machined rear drums arrived! Cheers.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Tue Nov 02, 2010 7:51 am 
Reply with quote Top  
No dramas mate hope they go to good use.

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Thu May 06, 2010 2:13 pm
Posts: 322
Location: Adelaide

Post Posted: Thu Nov 04, 2010 9:06 am 
Reply with quote Top  
What colour is the windscreen frame with the rust?

Also postage price to 5109 adelaide?

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Nov 05, 2010 6:28 am 
Reply with quote Top  
That one is grey. same as one with glass. It has rust in the bottom edge where glass seal sits.


B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 36 posts ]  Go to page 1, 2  Next

Jump to:  


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours