| Author |
Message |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 11, 2010 1:22 am |
|
Due to me wanting to get on with Vitara mods,
I need to clear out my tiny garage. No room to move or work.
Lots of free bits till end of Sunday 27th June, then stuff I don't want goes to tip.
chassis, snorkle and motor will still be for sale.
Mostly 1.0 litre bits, axles cv's diffs, axle housings bare and assemmbled.
vented discs from a vitara.
A 1.0 carby.
LWB chassis, bobbed and modded to suit vitara power steer.
1.0 bonnet fitted with "racing" tie down clips
Lots of brackets, brake, steering and bits
16"road tires.
Lots of other stuff, so ask away
christover
unit4/21 Norman Rd Croydon 3136
03 9017 7940
0407 538 963
kristovr@bigpond.net.au
Last edited by christover1 on Mon Jun 28, 2010 3:32 am, edited 6 times in total.
|
|
|
|
 |
anDy86
Joined: Sat Dec 19, 2009 10:30 pm Posts: 350 Location: Blackburn, Vic
Vehicle: LWB Sierra
|
 Posted: Fri Jun 11, 2010 1:36 am |
|
|
Hi Christover,
Do you mind if i pop by sometime after the long weekend?
I might take that bonnet off your hands!
Regards,
Andrew
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 11, 2010 2:02 am |
|
anDy86 wrote: Hi Christover,
Do you mind if i pop by sometime after the long weekend? I might take that bonnet off your hands!
Regards, Andrew
yes thats fine, see you next week sometime
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 11, 2010 2:15 am |
|
|
B Pillar and complete windscreen surround.
these 2 items now gone
Last edited by christover1 on Fri Jun 25, 2010 4:32 am, edited 2 times in total.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 11, 2010 2:24 am |
|
|
|
 |
mika
Joined: Mon Aug 03, 2009 11:30 pm Posts: 351
Vehicle: Sierra
|
 Posted: Fri Jun 11, 2010 5:49 am |
|
|
still got the doors and reco'd 1.3?
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 11, 2010 6:02 am |
|
mika wrote: still got the doors and reco'd 1.3?
Sorry the doors are gone, but I still have the 1.3, it has no waterpump, but is otherwise complete. Including inlet manbifold and a goodish carby. The engine won't be free, but will be very cheap. Open to offers.
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Sat Jun 12, 2010 11:31 am |
|
|
Would you post if I paid?
Interested in the vented Vit discs.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Sat Jun 12, 2010 11:41 am |
|
303zuke wrote: Would you post if I paid?
Interested in the vented Vit discs.
They failed a road worthy test, but looked ok to me.
They are probably a bit too thin?
I have a set of slotted vented discs that were on it when I bought it, but they failed rwc too.
I really don't think it would be worth the postage charge, but can if you wish
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Sat Jun 12, 2010 12:42 pm |
|
christover1 wrote: 303zuke wrote: Would you post if I paid?
Interested in the vented Vit discs. They failed a road worthy test, but looked ok to me. They are probably a bit too thin? I have a set of slotted vented discs that were on it when I bought it, but they failed rwc too. I really don't think it would be worth the postage charge, but can if you wish
Nah, OK, I have Ninja Frisbees here already.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Sat Jun 12, 2010 12:47 pm |
|
no worries, I know as soon as I throw something out, somebody will need it  )
|
|
|
|
 |
andy1517
Joined: Mon May 05, 2008 11:30 pm Posts: 104 Location: Brighton, Victoria
|
 Posted: Mon Jun 14, 2010 4:01 am |
|
|
Do you still have B Pillar?
Will it fit 94 swb sierra?
If so where abouts in melb are you?
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Mon Jun 14, 2010 1:00 pm |
|
andy1517 wrote: If so where abouts in melb are you?
Did you read all of the original post? He couldn't be more specific unless he told you which bedroom in the unit!
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Mon Jun 14, 2010 11:31 pm |
|
andy1517 wrote: Do you still have B Pillar? Will it fit 94 swb sierra? If so where abouts in melb are you?
yes B pillar still available, which is surprising to me. (TAKEN)
christover
Last edited by christover1 on Thu Jun 17, 2010 8:54 am, edited 1 time in total.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Mon Jun 14, 2010 11:32 pm |
|
303zuke wrote: andy1517 wrote: If so where abouts in melb are you? Did you read all of the original post? He couldn't be more specific unless he told you which bedroom in the unit!
How did you know I store my car parts inside the house 
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Tue Jun 15, 2010 10:37 am |
|
|
BUMP
Cos I need more room to get on with new vit jobs
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 25, 2010 4:31 am |
|
|
OK last chance for free stuff, and cheap stuff, as of end of this Sunday 27th June.
I got a treasure trove of junk, oops I mean spare parts
Come Monday I will be tipping stuff I don't need, except for chassis and motor, which will still be for sale.
|
|
|
|
 |
jakeroberts
Joined: Wed Aug 12, 2009 11:30 pm Posts: 312 Location: Bundaberg QLD
|
 Posted: Fri Jun 25, 2010 8:34 am |
|
|
hey mate have you got a 1L radiator.. if so what sorta condition is it in.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 25, 2010 8:37 am |
|
jakeroberts wrote: hey mate have you got a 1L radiator.. if so what sorta condition is it in.
Sorry no 1.0 radiator, but do have a 1.3 radiator in useable condition.
|
|
|
|
 |
imatt
Joined: Tue May 25, 2010 9:04 am Posts: 72 Location: Ballan
|
 Posted: Fri Jun 25, 2010 10:25 am |
|
|
Hi mate,
how much for the 1.3 engine?
Cheers Matt
_________________ 1985 Holden Drover, soon to be modified
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Fri Jun 25, 2010 10:29 am |
|
imatt wrote: Hi mate, how much for the 1.3 engine? Cheers Matt
$300 is best offer so far.
But they backed out of the deal.
So if you happy to come to get it, $250 will do.
It was recoed 31st /12 / 2008 according to my receipts
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Fri Jun 25, 2010 11:09 pm |
|
|
Consider the motor sold. Check you inbox you have a PM.
B4T
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Mon Jun 28, 2010 3:31 am |
|
Built4thrashing wrote: Consider the motor sold. Check you inbox you have a PM.
B4T
1.3 has sold to B4T, sorry to all interested parties.
|
|
|
|
 |
|