| auszookers.com https://www.auszookers.com/forum/ |
|
| Tmax 6500lb https://www.auszookers.com/forum/viewtopic.php?f=5&t=9058 |
Page 1 of 1 |
| Author: | ajsr [ Thu Jan 07, 2010 11:57 pm ] |
| Post subject: | Tmax 6500lb |
anyone got a Tmax 6500 winch? looking for some reviews dank tells me the 9000lbs arent much chop? they are nice and light about 20kg with my syn rope and l 5.5 kw motor. |
|
| Author: | v.w.dave [ Fri Jan 08, 2010 12:00 am ] |
| Post subject: | Re: Tmax 6500lb |
there was a thread a few weeks ago all about how bad they are. Some one has one and it couldnt pull them out of the mud or something. I am looking but cant find it. If I remember right it had something to do with the melb cup day or something. |
|
| Author: | ajsr [ Fri Jan 08, 2010 12:01 am ] |
| Post subject: | Re: Tmax 6500lb |
that was a warn 6000lb but thanks |
|
| Author: | v.w.dave [ Fri Jan 08, 2010 12:15 am ] |
| Post subject: | Re: Tmax 6500lb |
ok yahh just found it it was the warn 6000, Have you checked out the tiger11. They are cheep light and work great. A mate of mine just got one on his Lux and it pulled his rig up 2 sets of 3ft steps. |
|
| Author: | v.w.dave [ Fri Jan 08, 2010 12:17 am ] |
| Post subject: | Re: Tmax 6500lb |
http://www.tigerz11.com.au/ Here you go A few guys on here have them too and speek highly of them |
|
| Author: | shep [ Fri Jan 08, 2010 12:48 am ] |
| Post subject: | Re: Tmax 6500lb |
I have a tmax 6500 And I am very happy with it. It is light, fast and still has a 5.5 hp motor I have used it to flip a cruiser onto its roof and It didn't sound like it was working at all. With a snatch block it will be 13000lb 
I wanted a winch that was as light as possable While still having steel cable and the tmax was in My opinion the best choice. |
|
| Author: | lordviper556 [ Fri Jan 08, 2010 12:57 am ] |
| Post subject: | Re: Tmax 6500lb |
i want a tigrez11 but cant afford it or the winch bar yet 
|
|
| Author: | ajsr [ Fri Jan 08, 2010 4:53 am ] |
| Post subject: | Re: Tmax 6500lb |
shep wrote: I have a tmax 6500
And I am very happy with it. It is light, fast and still has a 5.5 hp motor I have used it to flip a cruiser onto its roof and It didn't sound like it was working at all. With a snatch block it will be 13000lb I wanted a winch that was as light as possable While still having steel cable and the tmax was in My opinion the best choice. thanks shep sounds good how long have you had it? hows it copeing with the water? I have a 6000lb chineese winch on the now with plasma(18 kg weight) rope but last time I sunk it for a while I dont think the motor liked it and has seized and I dont think its worth rebuilding. the tmax looks like a good fit for my setup cheers andrew |
|
| Author: | mcwilly [ Fri Jan 08, 2010 5:05 am ] |
| Post subject: | Re: Tmax 6500lb |
hows the tigrez11 compare to warn 9000lb. and do they fit in an arb bar |
|
| Author: | ajsr [ Fri Jan 08, 2010 5:46 am ] |
| Post subject: | Re: Tmax 6500lb |
I have an arb non winch bar that I modded.It would be a farking tight fit with either I recon.I belive they do fit however. Personally I think they would weigh too much (particularly if you run cable) for the arb bar as you have to loose the out rigger mounts with big rubber. so its only mounted through 2 bolt holes VERY close to the ends of each rail, you couldfix this but its still a lot of weight swinging on the end of a light car once you add a bar and winch. this is how I fixed my rails it is also a chassis ext for the RUF, the bar mounts to all 4 holes which are plated and crush tubed. You can see the modded bar in the next pic as it was too tight for my likeing standard  
|
|
| Author: | IN2DEP [ Fri Jan 08, 2010 5:47 am ] |
| Post subject: | Re: Tmax 6500lb |
Ive got a Tmax 9000lb, $900 fitted Havnt used it yet lol but when i do ill let yous know lol 
|
|
| Author: | shep [ Sat Jan 09, 2010 7:54 pm ] |
| Post subject: | Re: Tmax 6500lb |
my 6500 is around 18mths old but spent a fair bit of time on the floor of balls shed, it has been on the car for 6 or 8 months. when i moved to elcho the car was transported on a barge that carries mining equipment and my car was on the loading door for the whole trip from Darwin. the car must have coped a few waves as it was full of sea water and the salt build up was so thick that i had to scrape it off the gauge to see how much fuel it had in it. any how long story short i hosed the salt of the car and ran the winch cable out and oiled it and it still work's like a new one. i have pulled both the motor and gearbox off for a look and everything is still fine. it has more then enough power to drag a sierra out off a bog, even on a single line pull using the first layer of cable. with all the cable out and a snatch block it would move a tank maybe as a bonus i reckon it would be fast enough to pull start my car in lowrange. i don't have much faith in winch solenoids so i put mine under the bonnet, but they are a fairly easy and cheap thing to replace if they do fail. 
|
|
| Author: | lordviper556 [ Sat Jan 09, 2010 11:52 pm ] |
| Post subject: | Re: Tmax 6500lb |
ajsr wrote: I have an arb non winch bar that I modded.It would be a farking tight fit with either I recon.I belive they do fit however.
Personally I think they would weigh too much (particularly if you run cable) [/IMG] 23kg with the plasma rope |
|
| Author: | shep [ Sat Mar 13, 2010 10:30 pm ] |
| Post subject: | Re: Tmax 6500lb |
did ya end up buying a t-max mate? if ya did, what do ya reckon. |
|
| Author: | 60mad [ Sun Mar 14, 2010 1:56 am ] |
| Post subject: | Re: Tmax 6500lb |
I have a tigerz11 12000lb with rope on a standard ARB bar never had a problem with either product comes highly recommended from me 
|
|
| Author: | ajsr [ Sun Mar 14, 2010 2:01 am ] |
| Post subject: | Re: Tmax 6500lb |
shep wrote: did ya end up buying a t-max mate? if ya did, what do ya reckon.
yep its still in the box in my shed, waiting to go onto the new zook when I get round to building it. It looks the goods though |
|
| Author: | joeblow [ Sun Mar 14, 2010 3:21 am ] |
| Post subject: | Re: Tmax 6500lb |
was about to say there is a really, really good new winch about to hit the market......but you bought a winch allready
|
|
| Author: | ajsr [ Sun Mar 14, 2010 4:49 am ] |
| Post subject: | Re: Tmax 6500lb |
now im curious joe what is it?? |
|
| Author: | bron5on [ Tue Mar 16, 2010 2:19 pm ] |
| Post subject: | Re: Tmax 6500lb |
Curious also! |
|
| Author: | joeblow [ Tue Mar 16, 2010 9:06 pm ] |
| Post subject: | Re: Tmax 6500lb |
hint.....in one of the pics i uploaded about my vehicle you can see the new control box (being used on a warn winch). |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|