auszookers.com
https://www.auszookers.com/forum/

hub nut socket
https://www.auszookers.com/forum/viewtopic.php?f=5&t=7236		 Page 1 of 1
Author:  smileysmoke [ Wed Oct 14, 2009 11:53 pm ]
Post subject:  hub nut socket
i am chasing a 50mm deep socket to do the hub nuts up properly.. previously i have just hammer and chiselled them, but i have a torque wrench so i may as well do it properly.. cant find a 50mm deep dish socket or anything in aus..
dont feel like ordering only a socket from USA :D
anyone got one to sell or know where to get one?

cheers lads
Author:  steak_knife [ Wed Oct 14, 2009 11:55 pm ]
Post subject:  Re: hub nut socket
T&E do one, trade tool`s should to...
Author:  ajsr [ Thu Oct 15, 2009 12:20 am ]
Post subject:  Re: hub nut socket
repco or bursons should have them
or better yet get onto ebay and buy a cheap(under $100) 3/4 socket set and then you have all the sizes from 19mm to about 60 mm Armsup
Author:  steak_knife [ Thu Oct 15, 2009 12:22 am ]
Post subject:  Re: hub nut socket
ajsr wrote:
repco or bursons should have them
or better yet get onto ebay and buy a cheap(under $100) 3/4 socket set and then you have all the sizes from 19mm to about 60 mm Armsup


Yer you`d use 60mm alot, as a drift!! peaceout pompoms Armsup
Author:  ajsr [ Thu Oct 15, 2009 12:29 am ]
Post subject:  Re: hub nut socket
yep 3/4 sockets are great for installing seals and bearings :wink:
Author:  steak_knife [ Thu Oct 15, 2009 12:31 am ]
Post subject:  Re: hub nut socket
ajsr wrote:
yep 3/4 sockets are great for installing seals and bearings :wink:


In a press, if you dont have a hammer, hand brake, coffie mug, ect
Author:  smileysmoke [ Thu Oct 15, 2009 2:08 am ]
Post subject:  Re: hub nut socket
http://www.transquip.com.au/product.asp ... PARENT=318 85 bucks! :|
any other ideas? repco didnt have anything in their books or pc
Author:  steak_knife [ Thu Oct 15, 2009 2:13 am ]
Post subject:  Re: hub nut socket
ajsr wrote:
repco or bursons should have them
or better yet get onto ebay and buy a cheap(under $100) 3/4 socket set and then you have all the sizes from 19mm to about 60 mm Armsup


worth a look, you will be surprised what you can use huge socket`s for.
Author:  laurie [ Thu Oct 15, 2009 2:26 am ]
Post subject:  Re: hub nut socket
i ordered one in from my local spares shop $30.00
not deep but just fits
Author:  mrw82 [ Thu Oct 15, 2009 11:12 am ]
Post subject:  Re: hub nut socket
I picked up a 50mm socket from the local sunday market for $15. and a 3/4 to 1/2" reducer drive for $5.
Author:  smileysmoke [ Mon Oct 19, 2009 11:32 pm ]
Post subject:  Re: hub nut socket
still no luck finding one.. anyone have a spare one? :D
i need one for this weekend.. going to be putting the front locker in..
Author:  Taff [ Mon Oct 19, 2009 11:34 pm ]
Post subject:  Re: hub nut socket
Just get your local parts shop to order one

Mine was $35 and the adaptor was $10
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/