| auszookers.com https://www.auszookers.com/forum/ |
|
| Jackshaft required https://www.auszookers.com/forum/viewtopic.php?f=5&t=7204 |
Page 1 of 1 |
| Author: | kreecha [ Wed Oct 14, 2009 12:14 am ] |
| Post subject: | Jackshaft required |
Hey guys I am chasing the Shaft the joins the G/box and the T/Case in a 1.3L WT Sierra. Any sort of condition would be cool as I need to modify it anyhow. And preferrably in Sydney area. Cheers, davo. |
|
| Author: | lump_a_charcoal [ Wed Oct 14, 2009 12:23 am ] |
| Post subject: | Re: Lay Shaft required |
I might have a coily one if that helps... |
|
| Author: | kreecha [ Wed Oct 14, 2009 12:56 am ] |
| Post subject: | Re: Lay Shaft required |
wouldn't have a bloody clue mate, But thanx for the offer, and I will ask Suzi spares if it will fit when I am in there later in the week. Cheers, Davo. |
|
| Author: | lump_a_charcoal [ Wed Oct 14, 2009 1:12 am ] |
| Post subject: | Re: Lay Shaft required |
THey are a tad shorter I think... |
|
| Author: | Damo [ Wed Oct 14, 2009 1:30 am ] |
| Post subject: | Re: Lay Shaft required |
Just a heads up Kreecha, most Suzuki folks will refer to what you're looking for as a jackshaft. Good luck finding one, you shouldn't have too many dramas, and remember WT and NT versions will have different yokes on the transfer case end. |
|
| Author: | kreecha [ Wed Oct 14, 2009 3:18 pm ] |
| Post subject: | Re: Lay Shaft required |
Damo wrote: Just a heads up Kreecha, most Suzuki folks will refer to what you're looking for as a jackshaft. Good luck finding one, you shouldn't have too many dramas, and remember WT and NT versions will have different yokes on the transfer case end.
Cheers for the heads up I have updated the subject and first post. 
|
|
| Author: | Trojan [ Wed Oct 14, 2009 8:22 pm ] |
| Post subject: | Re: Lay Shaft required |
lump_a_charcoal wrote: THey are a tad shorter I think...
Coily jack shaft is about 2-3" longer |
|
| Author: | kreecha [ Wed Oct 14, 2009 9:31 pm ] |
| Post subject: | Re: Lay Shaft required |
Trojan wrote: lump_a_charcoal wrote: THey are a tad shorter I think... Coily jack shaft is about 2-3" longer Trojan, Do you know if they are the same flanges, splines and yokes? Cheers, Davo. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|