[selaga]

1994 JLX, with 4 speed auto, behind 1600 EFI......When cold, engages all gears EXCEPT reverse, absolutely nothing.....When it warms up 3-4 min, reverse comes back OK......

Also on highway, doesn't hold OD when cold, but OK when warm ?

Checked fluid level - fine....

Any suggestions/advice ?

[joeblow]

the selector on the side of the auto may need an clean and or adjustment. after a while they become tempramental. the O/D will not kick in until coolant temp rises above 40° or so.

[selaga]

Thanks for the heads up, I will give it a go, fingers crossed, otherwise it is a tranny rebuild......

[twitchy]

selaga wrote:

Thanks for the heads up, I will give it a go, fingers crossed, otherwise it is a tranny rebuild......

Breast augmentation or penile attachment???????????

[joeblow]

twitchy wrote:

selaga wrote:

Thanks for the heads up, I will give it a go, fingers crossed, otherwise it is a tranny rebuild......

Breast augmentation or penile attachment???????????

BOOM BOOM.......



never rebuild one, throw it out and get a second hand unit......much cheaper.

[selaga]

twitchy wrote:

selaga wrote:

Thanks for the heads up, I will give it a go, fingers crossed, otherwise it is a tranny rebuild......

Breast augmentation or penile attachment???????????

CLEVER !!!!

[selaga]

Quote:

never rebuild one, throw it out and get a second hand unit......much cheaper.

I have replaced a few autos but never one with the lockup torque converter, is there anything I need to be aware off ? Has someone a PDF of the FSM ?

[joeblow]

its all plug out plug in. just the weight is a pain in the arse!