| auszookers.com https://www.auszookers.com/forum/ |
|
| interesting 1.6 in sierra photos. https://www.auszookers.com/forum/viewtopic.php?f=5&t=6885 |
Page 1 of 1 |
| Author: | shep [ Sun Sep 27, 2009 3:46 pm ] |
| Post subject: | interesting 1.6 in sierra photos. |
this is a 8V 1.6 in a sierra with a standard 1.6 sump. the bump stops are about 5mm of the diff and there is 30mm clearance between sump and diff. i recon that it would only need a little tap with a hammer or move the diff forward 20mm to get all the clearance it would need. it does have a VL engine mount but i dont think that that would make a difference. oh and i used a benT kit. 
|
|
| Author: | ajsr [ Sun Sep 27, 2009 3:51 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
what about when it takes a good hit in the front shep?? I recon my bump stops compress to half their original height just flexing it up, let alone hitting a hole at 30 km h/r. if it can be done that would be tops as i have a 16v 1.6 ready to go in mine. let me know how you go. |
|
| Author: | shep [ Sun Sep 27, 2009 4:01 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
i have just slapped it together so i can drive it to balls shed. it is a vitara sump if that makes a difference. i recon that the bumpstops could compress 25mm before the sump would touch the diff. moving the diff forward would (i recon) let the diff clear the sump easily. i have been running that motor for a bit but i have just put standard flat springs in it so i could move it. |
|
| Author: | ajsr [ Sun Sep 27, 2009 4:05 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
mines out of an x90 so im guessing the same/similar sump |
|
| Author: | Damo [ Sun Sep 27, 2009 4:09 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
ajsr wrote: mines out of an x90 so im guessing the same/similar sump
Just out of interest, what's your dizzy look like and how many wires go to your airflow meter? |
|
| Author: | ajsr [ Sun Sep 27, 2009 4:16 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
ill get a pic damo but I think its the same as vitara |
|
| Author: | Damo [ Sun Sep 27, 2009 5:44 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
ajsr wrote: ill get a pic damo but I think its the same as vitara
I have a X-90 donk and the coil is built into the dizzy and it has a 3 wire AFM. |
|
| Author: | ajsr [ Sun Sep 27, 2009 5:46 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
air flow is a three pin job 
and dist is the same as vit best I can tell, cant find dist but here are engine pics 
|
|
| Author: | steak_knife [ Sun Sep 27, 2009 5:47 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
Damo wrote: ajsr wrote: ill get a pic damo but I think its the same as vitara I have a X-90 donk and the coil is built into the dizzy and it has a 3 wire AFM. Coil in dizzy? any pic`s? Didn`t think Suzuki did that. 
|
|
| Author: | ajsr [ Sun Sep 27, 2009 5:48 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
yep now i think about it I think you maybe right about the coil built into the dist |
|
| Author: | royce [ Sun Sep 27, 2009 6:20 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
mine has coil in dissy, more wires in the AFM though I think |
|
| Author: | Damo [ Sun Sep 27, 2009 6:35 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
Yep plug for the dizzy looks same as mine. I think the AFM is the same as on the Vits that have 3 wire AFM. |
|
| Author: | kreecha [ Sun Sep 27, 2009 7:18 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
anyone tried to put the 'coil in dizy' onto a 1.3? |
|
| Author: | royce [ Sun Sep 27, 2009 7:55 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
kreecha wrote: anyone tried to put the 'coil in dizy' onto a 1.3?
Even though its specific to the 16 valve so may have physical differences I think it might rely on the ECU to give it a bit of a hand so wont operate by itself, could be worth having a look in the manual and wiring diagrams to be sure though |
|
| Author: | Damo [ Sun Sep 27, 2009 8:07 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
royce wrote: kreecha wrote: anyone tried to put the 'coil in dizy' onto a 1.3? Even though its specific to the 16 valve so may have physical differences I think it might rely on the ECU to give it a bit of a hand so wont operate by itself, could be worth having a look in the manual and wiring diagrams to be sure though Yes the igniter is built in too , wont work without the (a) ECU. |
|
| Author: | shep [ Sun Sep 27, 2009 8:36 pm ] |
| Post subject: | Re: interesting 1.6 in sierra photos. |
plus there is nothing wrong with the 8V dizzy. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|