auszookers.com
https://www.auszookers.com/forum/

bad 1.3 transfercase
https://www.auszookers.com/forum/viewtopic.php?f=5&t=6774		 Page 1 of 1
Author:  neilss [ Mon Sep 21, 2009 9:21 pm ]
Post subject:  bad 1.3 transfercase
g'day all im abit of a newbie and was after some help. my sierra transfercase is making abit of a rattle when im not accelerating ( for example rolling down hills) and it slips out of 4h when going over bumps some times, are they easy to fix or better off buying a second hand one.
cheers
Author:  lump_a_charcoal [ Mon Sep 21, 2009 9:56 pm ]
Post subject:  Re: bad 1.3 transfercase
If it is rooted it would be easier to buy a second hand one with a 3 month warranty.

I'll buy your stuffed one if you go that way...
Author:  jakeyr [ Mon Sep 21, 2009 10:05 pm ]
Post subject:  Re: bad 1.3 transfercase
i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?
Author:  hutch [ Mon Sep 21, 2009 10:13 pm ]
Post subject:  Re: bad 1.3 transfercase
jakeyr wrote:
i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?


I got a price today $350 MINDEN wreckers but they dont have one :(
Author:  steak_knife [ Mon Sep 21, 2009 10:59 pm ]
Post subject:  Re: bad 1.3 transfercase
hutch wrote:
jakeyr wrote:
i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?


I got a price today $350 MINDEN wreckers but they dont have one :(


So why would thay give a price???
Author:  BJPK [ Mon Sep 21, 2009 11:02 pm ]
Post subject:  Re: bad 1.3 transfercase
550 seems a bit steep.
even by perth standards.
Author:  lump_a_charcoal [ Mon Sep 21, 2009 11:02 pm ]
Post subject:  Re: bad 1.3 transfercase
Around $350 is pretty standard these days for a good second hand jobbie.
Author:  jakeyr [ Mon Sep 21, 2009 11:23 pm ]
Post subject:  Re: bad 1.3 transfercase
just wondering how much are the bearing kits?
Author:  Fatzook [ Mon Sep 21, 2009 11:32 pm ]
Post subject:  Re: bad 1.3 transfercase
jakeyr wrote:
just wondering how much are the bearing kits?


Low Range Offroad
Author:  neilss [ Tue Sep 22, 2009 1:37 am ]
Post subject:  Re: bad 1.3 transfercase
are all the 1.3 cases interchangeable?
Author:  lump_a_charcoal [ Tue Sep 22, 2009 1:51 am ]
Post subject:  Re: bad 1.3 transfercase
Yes
Author:  neilss [ Tue Sep 22, 2009 1:57 am ]
Post subject:  Re: bad 1.3 transfercase
mine has the hand brake on the back of the case and the one im looking at doesn't so does the hand brake drum bolt onto the other case
Author:  lump_a_charcoal [ Tue Sep 22, 2009 2:04 am ]
Post subject:  Re: bad 1.3 transfercase
Should do, are the cases the same shape?
Some flange swapping may be in order...
Author:  neilss [ Tue Sep 22, 2009 8:36 pm ]
Post subject:  Re: bad 1.3 transfercase
they look the same shape, has anyone on here done this before that is swapped there nt transfer case with a wt transfer case
Author:  want33s [ Tue Sep 22, 2009 10:31 pm ]
Post subject:  Re: bad 1.3 transfercase
NT and WT cases are identical.
The NT handbrake drum will bolt onto the WT transfer and the NT flanges will go straight on as well.
Author:  neilss [ Tue Sep 22, 2009 11:31 pm ]
Post subject:  Re: bad 1.3 transfercase
ok cheers
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/