It is currently Mon Apr 27, 2026 11:24 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 7 posts ] 
Author Message

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Tue Sep 15, 2009 2:34 am 
Reply with quote Top  
Had to fix the el-cheapo winch today.

The clucth gear inside the gearbox had developed a burred edge on the groove that the freespool handle slides in. The clutch gear is ment to slide inside the housing and lock inplace over a fixed gear. The bur had jammed the clutch gear in the housing and left me in freespool. I drilled and tapped 3 holes in the back of the housing to force the gear into the engaged position so i could still use the winch as it was needed on sunday.


Now today i went and saw the nice blokes at Ironman in clayton with my stuffed winch gearbox and we figured out that an ironman winch gearbox will bolt up to the cheap winch. The gear on the end of the cable drum and the bolt spacings on the spreader bars are the same. The only difference is the gear in the end of the ironman box is retained by 2 small screws and if left inplace will require a 2mm spacer put on the end of the spreader bars. But if you remove the 2 screws it will bolt up . The gear on the end of the barrel will hold the gear inplace without the 2 screws as it has a circlip on it.

None of this prob makes sense to anyone unless they have pulled a winch apart before. but i thought i'd share .

Massive thanx to the ironman boys for their time and Knowledge..


B4t

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Tue Sep 15, 2009 2:41 am 
Reply with quote Top  
Well done, seen buggered 1`s before & yes, cheep 1`s.

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Sat Apr 05, 2008 10:30 pm
Posts: 1157
Location: VIC
Vehicle: WR250F/Jeep XJ

Post Posted: Tue Sep 15, 2009 4:57 am 
Reply with quote Top  
Great to hear its sorted! So what did they charge you for the gearbox?

 Profile WWW  

Offline
az supporter
az supporter

Joined: Mon Apr 21, 2008 11:30 pm
Posts: 1095
Location: Bulimba, Brisbane
Vehicle: '92 Sierra

Post Posted: Tue Sep 15, 2009 1:24 pm 
Reply with quote Top  
and what was the cheapo you started with?

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Sep 16, 2009 12:14 am 
Reply with quote Top  
the cheapo i had was bought about 2 years ago. it had a one piece gearbox not a 3 piece like the ironman box. i bought it before all the new cheap winches flooded the market so it cost me about the same as what an ironman winch would now. it has worked well up untill last week and has had to pull several patrols out of bad situations.


Its good to know that you dont need to buy a complete winch if the cheap ass ones die.

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Post Posted: Wed Sep 16, 2009 12:44 am 
Reply with quote Top  
Hybrid wrote:
and what was the cheapo you started with?


Fierce Leaping Dragon Industrial Factory No 7?

Had heard a few bad stories about them!

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Sep 16, 2009 1:32 am 
Reply with quote Top  
http://cgi.ebay.com.au/NEW-WIRELESS-168 ... 286.c0.m14
the winch looks alot like this but its not this exzct one

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours