Wire`s to the T/case that is.....
| auszookers.com https://www.auszookers.com/forum/ |
|
| Jimny Transfer case https://www.auszookers.com/forum/viewtopic.php?f=5&t=6637 |
Page 1 of 1 |
| Author: | jimny_99 [ Mon Sep 14, 2009 9:49 pm ] |
| Post subject: | Jimny Transfer case |
hey guys wen putting the jimny into 4wd or low range the light on the dash is meant to come on and stay solid, however mine just keeps flashing. as far as im aware the 4 wheels are still engaged and the low range still functions as normal. has any one else had this problem? thanks |
|
| Author: | steak_knife [ Mon Sep 14, 2009 11:17 pm ] |
| Post subject: | Re: Jimny Transfer case |
Sounds like a vacuum leak to the hub`s. check the hoses. Also check that no wire`s have been damaged. Steve |
|
| Author: | steak_knife [ Mon Sep 14, 2009 11:18 pm ] |
| Post subject: | Re: Jimny Transfer case |
Wire`s to the T/case that is.....
|
|
| Author: | northernmenace [ Sun Sep 20, 2009 11:48 pm ] |
| Post subject: | Re: Jimny Transfer case |
I seem to remember reading somewhere about a diagnosis chart as to whats wrong if its flashing, have you checked out the manual, see if its in there in the troubleshooting area? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|