| auszookers.com https://www.auszookers.com/forum/ |
|
| SJ80 Transfer Case Swap https://www.auszookers.com/forum/viewtopic.php?f=5&t=57995 |
Page 1 of 1 |
| Author: | Douglas Gosper [ Wed Feb 25, 2026 8:15 pm ] |
| Post subject: | SJ80 Transfer Case Swap |
G 'day Guys I am wanting to do a SJ70 transfer case swap into my SJ80, I have a SJ70 transfer case ready to go in. My SJ70 Transfer Case has got the SJ70 mounts and it has its factory flanges. I am enquiring in what needs to be done to get the transfer case to fit. Could someone please give me a list of parts required to make the transfer fit. Cheers 
|
|
| Author: | DesmondTheDrover [ Wed Apr 01, 2026 8:00 pm ] |
| Post subject: | Re: SJ80 Transfer Case Swap |
A W/T case A set of Leafy transfer case mounts a W/T jack shaft (one thats from back of transmission to front of transfer |
|
| Author: | Gwagensteve [ Sun Apr 05, 2026 12:28 pm ] |
| Post subject: | Re: SJ80 Transfer Case Swap |
And a WT front driveshaft. The sj80 shaft is longer due to the transfer case being shorter between the outputs. |
|
| Author: | Douglas Gosper [ Tue Apr 07, 2026 7:45 pm ] |
| Post subject: | Re: SJ80 Transfer Case Swap |
Thanks For the INFO Also does a sj70 case change the gearing much? Cheers |
|
| Author: | Gwagensteve [ Thu Apr 09, 2026 8:56 am ] |
| Post subject: | Re: SJ80 Transfer Case Swap |
WT transfer gearing is 7% lower in low and high range. Not enough to justify the swap. 1.0 litre gearing is much better and basically makes low 1st feel a whole gear lower than stock, but it’s still nothing like having reduction gears. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|