| auszookers.com https://www.auszookers.com/forum/ |
|
| How to non-vvti gearbox to vvti engine… https://www.auszookers.com/forum/viewtopic.php?f=5&t=57540 |
Page 1 of 1 |
| Author: | markil [ Tue Jun 27, 2023 8:50 am ] |
| Post subject: | How to non-vvti gearbox to vvti engine… |
I’m in the process of putting a Sierra transfer and non vvti gearbox into a 2005 vvti jimny. I think I have the transfer bits and pieces sorted, and I thought the gearbox was a simple bolt in. However, watching a video on YouTube I learned that some people use a gearbox to engine adaptor, which I hadn’t come across before. I did find one thread mentioning this as well with dead links to where they used to be for sale at, but for the life of me I can’t find that thread now either. So there’s a bunch of threads explaining how to convert a vvti engine to put into an older non vvti jimny, but the gearbox to engine part seems a bit grey to me. Do I need a vvti engine to non vvti gearbox adaptor? If so, who stocks them? Any other tips from those who have done this before would be appreciated |
|
| Author: | fordem [ Tue Jun 27, 2023 8:28 pm ] |
| Post subject: | Re: How to non-vvti gearbox to vvti engine… |
I think you need to clarify what you consider to be a "non-VVTI" gearbox. Jimnys without VVTI can have either a G13bb or an M13a engine, a 2005 VVTI Jimny will have an M13a engine, I would not expect there to be any issues bolting the box off of a non-VVTI M13a engine onto a VVTI M13a. Bolting the box off of a G13bb onto an M13a is going to be an entirely different matter. What did the "non-VVTI gearbox you have come out of? What engine was it originally bolted to? |
|
| Author: | markil [ Wed Jun 28, 2023 7:57 am ] |
| Post subject: | Re: How to non-vvti gearbox to vvti engine… |
It was out of a G13BB jimny. Is it as simple as just switching bellhousings? |
|
| Author: | Gwagensteve [ Wed Jun 28, 2023 8:08 am ] |
| Post subject: | Re: How to non-vvti gearbox to vvti engine… |
No. The bellhousing is not removable. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|