| auszookers.com https://www.auszookers.com/forum/ |
|
| G13B Haynes Manual https://www.auszookers.com/forum/viewtopic.php?f=5&t=57166 |
Page 1 of 1 |
| Author: | hamblock [ Fri Jan 21, 2022 2:26 pm ] |
| Post subject: | G13B Haynes Manual |
As the title implies I am looking for an online (free if possible) copy of the Haynes manual for the G13B engine as this is the engine that is in my sierra. Obviously I'd probably be looking for the swift GTi Haynes manual but I cant seem to find them anywhere and I don't want to pay $60 just for a year of access to an online Haynes manual Cheers! |
|
| Author: | Gwagensteve [ Sun Jan 23, 2022 2:34 pm ] |
| Post subject: | Re: G13B Haynes Manual |
if you get hold of one burn it immediately. They're awful. Get a proper factory service manual. |
|
| Author: | fordem [ Mon Jan 24, 2022 10:05 pm ] |
| Post subject: | Re: G13B Haynes Manual |
I've never seen a Haynes manual that was specific to a single engine, and as Steve suggests, the Haynes manuals are terrible - you can get the Swift factory manuals from the link below, the one you need is the supplementary service manual for the GTi http://www.rhinoman.org/manuals/Swift/swift_manuals.html |
|
| Author: | Eddy [ Tue Jan 25, 2022 7:10 am ] |
| Post subject: | Re: G13B Haynes Manual |
I have an Haynes manual for the Vit, and find it to be an excellent publication! When placed under the PC monitor base the screen is in exactly the right position to view comfortably. |
|
| Author: | Gwagensteve [ Tue Jan 25, 2022 8:06 am ] |
| Post subject: | Re: G13B Haynes Manual |
Good point. I’ve probably misrepresented how useful they are. Useful as a Jack base too. Unfortunately they’re hard cover so you can’t roll them up to join snatch straps. |
|
| Author: | BZOOK [ Tue Jan 25, 2022 12:27 pm ] |
| Post subject: | Re: G13B Haynes Manual |
Mine are Gregory's manuals with the soft cover. Are they any better? At least they can join snatch straps! |
|
| Author: | MarbleMaker [ Sat Jan 29, 2022 11:55 pm ] |
| Post subject: | Re: G13B Haynes Manual |
Gwagensteve wrote: if you get hold of one burn it immediately. They're awful. Get a proper factory service manual. where does one get a hard copy? The download one I can see are crap for reading the wiring schematics :/. Also not happy paying 17 bucks for a digital download without seeing the scan quality. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|