auszookers.com
https://www.auszookers.com/forum/

Help with brake cable identification!
https://www.auszookers.com/forum/viewtopic.php?f=5&t=57064
Page 1 of 1

Author:  Dboi23 [ Wed Sep 22, 2021 1:38 pm ]
Post subject:  Help with brake cable identification!

Hi Everyone,

Apologies as this is my first post, so it might not be in the right place!

I recently purchased a 1995 Suzuki and currently fixing a few things, including the brakes.
Attachment:
Suzuki sierra.jpg


On inspection, I have found that the rear brake cable is completely seized and It looks like I will have to buy a new one.

The car has had modified brakes as it is running a 1.6 Vitara engine, using R31 aluminum rear calipers. It is about 945mm long and adjustment is only on right side cable.
Have attached pictures below in the hope that someone can help me identify it (if it's from another car), or if it's custom, where I could get one from.
Attachment:
Brake.jpg


One end of the cable has a round eyelet and the other has a square-looking connection.

TIA!

Author:  MrRocky [ Fri Oct 01, 2021 7:44 am ]
Post subject:  Re: Help with brake cable identification!

Cant tell from the pic but the lwb runs a longer cable than the swb anyway your best bet would be a maruti one from india.
It may be a modified standard one, most fishing/boating shops would have crimpers suitable to modify a cable but brakes are pretty important so dont skimp.

Author:  Brenno [ Fri Oct 01, 2021 8:16 am ]
Post subject:  Re: Help with brake cable identification!

It does look very standard, see if someone who has a WT can post up, or might be maruti specific

Author:  MrRocky [ Fri Oct 01, 2021 9:08 am ]
Post subject:  Re: Help with brake cable identification!

Lwb wt maruti and wt swb are the same with the only difference being the length. I did have a few spare maruti ones but never broke any so there at the tip now

Author:  Gwagensteve [ Fri Oct 01, 2021 9:57 am ]
Post subject:  Re: Help with brake cable identification!

I sent the OP a PM with the name of the builder and some ideas for contacting them, the builder might remember what parts they used.

Author:  Joe [ Fri Oct 01, 2021 11:27 am ]
Post subject:  Re: Help with brake cable identification!

Joeblow?

Author:  Gwagensteve [ Fri Oct 01, 2021 11:49 am ]
Post subject:  Re: Help with brake cable identification!

Yeah, I'm almost 100% sure it's one of his builds. I reckon I remember seeing it at a field day when it was just complete.

Author:  Brenno [ Fri Oct 01, 2021 12:09 pm ]
Post subject:  Re: Help with brake cable identification!

A did get a lot of Joe Blow Vibes when I saw it.

Author:  Gwagensteve [ Fri Oct 01, 2021 12:12 pm ]
Post subject:  Re: Help with brake cable identification!

The front shocks mounts are fairly distinctive.

Author:  Joe [ Fri Oct 01, 2021 1:36 pm ]
Post subject:  Re: Help with brake cable identification!

Yeah first person I thought of when I seen it

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/