| auszookers.com https://www.auszookers.com/forum/ |
|
| vacuum hoses on my carby https://www.auszookers.com/forum/viewtopic.php?f=5&t=56893 |
Page 1 of 1 |
| Author: | Mew1201 [ Mon Feb 15, 2021 8:33 am ] |
| Post subject: | vacuum hoses on my carby |
hi all, i recently purchased a 1984 sj413 (advertised as an sj50 but im not sure about that) i had to replace the o ring on the water inlet pipe and when putting it back on one of the nipples on the water block broke so i had to take the carby off to replace the nipple. upon trying to put it all back together i think i put the vacuum hoses on wrong, as it was running rough and not idling right when it was at temperature and stalling when the clutch was pushed in. i will attach some images of the way i have put the hoses on if someone could correct me or send me photos of where they should be. there are also 2 (i assume) water nipples running through the carby and was wondering what they are for. |
|
| Author: | Erik [ Mon Feb 15, 2021 9:02 pm ] |
| Post subject: | Re: vacuum hoses on my carby |
I shall take some better pics of mine tomorrow but it has weird A/C shite and also runs like a dog (4k carby's fighting to get out of it's box....) Some wide shots:- |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|