auszookers.com
https://www.auszookers.com/forum/

Engine conversion list / specs
https://www.auszookers.com/forum/viewtopic.php?f=5&t=5190		 Page 1 of 1
Author:  steve [ Sat Jun 13, 2009 12:15 pm ]
Post subject:  Engine conversion list / specs
Can anyone add any info to this, like what horsepower each one as? or add another motor type with specs that could be considered for a engine swap? I wouldn't have a clue of what half of these engines are even :oops:

A12 87 kg 192 lbs
A14 93 kg 205 lbs
L18 118 kg 260 lbs
CA18ET 118 kg 260 lbs
QR25DE 121 kg 267 lbs
CA18DET 128 kg 282 lbs
SR20DE 139 kg 306 lbs
SR20DET 149 kg 328 lbs
FJ20ET 166 kg 366 lbs (205 hp)
KA24DE 167 kg 368 lbs (est)
J20A (weight? Hp?)
H20A (weight? Hp?)

With Transmission:
SR20DET 490 lbs
RB25DET 667 lbs (280 hp)
VG30DET 589 lbs
Ford Small Block V-8 487 lbs
Chevy Small Block V-8 575 lbs

Suzuki Sierra: G13BA 73kg

Suzuki Vitara: G16B 89kg
Author:  royce [ Sat Jun 13, 2009 12:28 pm ]
Post subject:  Re: Engine conversion list / specs
4AGE 155kg as fitted to car less exhaust manifold has 8-100-123kw depending on spec
Author:  eldo [ Sat Jun 13, 2009 12:44 pm ]
Post subject:  Re: Engine conversion list / specs
A12 is 69 horsepower, go the datto
Author:  appsie [ Sat Jun 13, 2009 4:11 pm ]
Post subject:  Re: Engine conversion list / specs
im pretty sure the j20a is about 97 kw and fairly big torque too??sorry if im wrong

EDIT
some overseas forum just had 107 kw at 6000rpm and 193 nM torque at 4000 rpm
Author:  Zook_Fan [ Sat Jun 13, 2009 9:24 pm ]
Post subject:  Re: Engine conversion list / specs
G13B is 49.5kw
Author:  2stroker [ Sun Jun 14, 2009 8:02 pm ]
Post subject:  Re: Engine conversion list / specs
eldo wrote:
A12 is 69 horsepower, go the datto


A12GX = 83hp

A14GX = 102hp

But this is where the real stuff happens....

LJ50 2stroke 539cc = 66kg / 33hp @5500rpm (yep that's a whopping 24kw)
41.6lb-ft torgue at 3500rpm
Author:  jamienoble [ Sun Jun 14, 2009 8:17 pm ]
Post subject:  Re: Engine conversion list / specs
whats the stock power of a G16 (carbed version) 8v
Author:  ca18zook [ Sun Jun 14, 2009 11:18 pm ]
Post subject:  Re: Engine conversion list / specs
The ca18de has 105kw at the flywheel standed
Sr20de has around the same
The Ca18 works great in the zook and i have an sr20de in my dato 1200 the runs a 14.6 at the drags
Trent
Author:  Hybrid [ Mon Jun 15, 2009 1:25 pm ]
Post subject:  Re: Engine conversion list / specs
jamienoble wrote:
whats the stock power of a G16 (carbed version) 8v


G16a carb'd is listed at 55kw Jamie
Author:  Fatzook [ Mon Sep 14, 2009 2:44 am ]
Post subject:  Re: Engine conversion list / specs
G16A 8 valve TBI is 59kw.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/