This is whats chopped out and what remains including engine harness
| auszookers.com https://www.auszookers.com/forum/ |
|
| Suzuki baleno/sierra conversion help https://www.auszookers.com/forum/viewtopic.php?f=5&t=51138 |
Page 1 of 1 |
| Author: | jaczook [ Tue Oct 06, 2015 5:27 pm ] |
| Post subject: | Suzuki baleno/sierra conversion help |
hi all anyone can help me with the wiring and sump setup on a sierra/baleno conversion? willing to pay for someone to do, will post it all. Cheers |
|
| Author: | MrRocky [ Tue Oct 06, 2015 7:01 pm ] |
| Post subject: | Re: Suzuki baleno/sierra conversion help |
Ive started doing the coilpack baleno looms but im in perth |
|
| Author: | jaczook [ Tue Oct 06, 2015 7:04 pm ] |
| Post subject: | Re: Suzuki baleno/sierra conversion help |
Yea no problem I can post the loom out if you can cut and shit it? |
|
| Author: | MrRocky [ Tue Oct 06, 2015 7:14 pm ] |
| Post subject: | Re: Suzuki baleno/sierra conversion help |
I can as long as loom is complete and the ecu corrosponds with the model iam familiar with. Send us a pic via p.m. and should be able to work something out. Price is generally about $400 and retains the baleno fuse box for use of the fuel and main relay. Only 4 wires to connect with a few labelled that are optional to connect e.g. thermo fan, headlight idleup, tacho, ect... |
|
| Author: | MrRocky [ Tue Oct 06, 2015 7:24 pm ] |
| Post subject: | Re: Suzuki baleno/sierra conversion help |
This is whats chopped out and what remains including engine harness
|
|
| Author: | 4x4xzook [ Wed Oct 07, 2015 7:17 am ] |
| Post subject: | Re: Suzuki baleno/sierra conversion help |
wiring looms just look like plastic spaghetti to me. looks like a lot was taken out Rocky.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|