| auszookers.com https://www.auszookers.com/forum/ |
|
| 1999 jimny g13bb manual wanting to fit a m18 and auto box https://www.auszookers.com/forum/viewtopic.php?f=5&t=51097 |
Page 1 of 1 |
| Author: | sj80tourer [ Tue Sep 29, 2015 11:39 am ] |
| Post subject: | 1999 jimny g13bb manual wanting to fit a m18 and auto box |
Ok i want to fit a m18 and a auto to my jimny , firstly some info on my rig I have a wt case 4:19 gearing spinal mount conversion , add engineering axels, arb lockers will the grabox be a bolt in swap and what difference are tge g13 and m series engine mounts .. wirings not a issue as im fiting a haltech |
|
| Author: | watermouse [ Sun Oct 04, 2015 9:20 pm ] |
| Post subject: | Re: 1999 jimny g13bb manual wanting to fit a m18 and auto bo |
The only auto that will bolt up to the m18 is the one from behind a m13. That particular auto will be your weakest link. If your jimny is already a g13 then the g16B (coilpack = no wiring needed) will bolt up to a vit AW4 auto. Or even a j20a, if you want moar pow, with the AW4 will be bomb proof, possibly cheaper and less heartache in the long run. G16 will use jimny or RB30 vl commie mounts + some fab (if you don't buy a mostly useless adapter kit). J20a will need some fabbed mounts. M series will need ...oh wait.. theres a thread all about thishttp://www.auszookers.com/forum/viewtopic.php?f=17&t=30308 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|