buying something from the AZ store gets you AZ Crew status & the ability to add a signature.
| auszookers.com https://www.auszookers.com/forum/ |
|
| is 6mm plate enough for bar mounts? https://www.auszookers.com/forum/viewtopic.php?f=5&t=48351 |
Page 1 of 1 |
| Author: | bibby [ Thu Nov 06, 2014 8:17 pm ] |
| Post subject: | is 6mm plate enough for bar mounts? |
Hey guys Some of you may have read about me asking how to extend the mounts on an arb bar to suit body lift but turns out my mate wants to keep the bar. on the positive side i was looking around in my shed and there is about 8 meters of 32nb tube and a 210x700mm piece of 6mm plate. if you ask me i was thinking that would be perfect for a tube bar. i am planning on welding a piece of 6mm plate on either side of the chassis and then two other pieces of plate that all the tubing will weld to. i will then make it so that the plate all the tubing is welded to can bolt to the plate welded to the chassis aswell as utilizing the already existent chassis mount holes. is this a bad idea? or does it sound fine? will 6mm plate be enough for them jobs? if no one understands what i mean i will draw it out and show you but if you get it please let me know what you think as im not some structural engineer and would rather a more knowledgeable sole give me confidence in using the 6mm and 32nb Thanks in advance guys Regards Sam PS how do i make a signature? |
|
| Author: | shep [ Thu Nov 06, 2014 8:23 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
Do this viewtopic.php?f=14&t=7930&hilit=Strong+winch+bar+mounts |
|
| Author: | atari4x4 [ Thu Nov 06, 2014 8:29 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
buying something from the AZ store gets you AZ Crew status & the ability to add a signature.
|
|
| Author: | bibby [ Thu Nov 06, 2014 8:51 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
Shep thats pretty much what im doing, is that 6mm what you used? and atari4x4 like stickers and shit? |
|
| Author: | shep [ Thu Nov 06, 2014 8:56 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
From memory it was 8 or 10mm |
|
| Author: | bibby [ Thu Nov 06, 2014 9:02 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
would 6mm be okay? |
|
| Author: | shep [ Thu Nov 06, 2014 9:12 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
Dunno. Try it and if it bends then go bigger. 6mm is still bigger then what ARB use for mounts. |
|
| Author: | bibby [ Thu Nov 06, 2014 9:20 pm ] |
| Post subject: | Re: is 6mm plate enough for bar mounts? |
really?? well ill see how i go |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|