Don't have an install pick handy, but I use these relay sockets.
They clip together and can be bolted to the firewall etc to keep things nice and neat.
Use a Narva fused relay to make things even simpler.
| auszookers.com https://www.auszookers.com/forum/ |
|
| anyone got photos of a neat relay set up? https://www.auszookers.com/forum/viewtopic.php?f=5&t=48302 |
Page 1 of 1 |
| Author: | bibby [ Sat Nov 01, 2014 7:39 pm ] |
| Post subject: | anyone got photos of a neat relay set up? |
so i have got 3 relays, 1 for my thermo fan, 1 for my light bar and 1 for my falcon alternator i also have a spare one ready for anything else down the line i also have a little fuse box and i have decided i want to make the wiring neat instead of inline fuses and relays just everywhere so has anyone got photos of how theres is set up? just to give me an idea, thanks alot Regards Sam |
|
| Author: | mnemonix [ Sat Nov 01, 2014 8:39 pm ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
Don't have an install pick handy, but I use these relay sockets. They clip together and can be bolted to the firewall etc to keep things nice and neat. Use a Narva fused relay to make things even simpler.
|
|
| Author: | whincup [ Sat Nov 01, 2014 8:46 pm ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
dont have photos right now, however I used these: http://www.ebay.com.au/itm/Relay-Base-S ... 417b85ad81 i have 6 relays, and i mounted them between the battery and the airbox. add a bit of split tube conduit to the wires and it looks fairly neat edit: too slow |
|
| Author: | bibby [ Sat Nov 01, 2014 8:59 pm ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
yeah was more wondering where i should mount them and just ideas guys but thanks heaps |
|
| Author: | pezz [ Sun Nov 02, 2014 3:22 am ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
Neat...ish could be better 
|
|
| Author: | Harry_ [ Sun Nov 02, 2014 4:39 am ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
Hey mate, I've got mine mounted on the front plate of my second battery tray.  Photo doesn't do it much justice, but I think it looks pretty neat. |
|
| Author: | ninjamoses [ Sun Nov 02, 2014 9:26 am ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
One of royce's looms - uses the same relays mnemonix mentioned above and have it bolted to the firewall with the help of a few nutserts 
|
|
| Author: | atari4x4 [ Sun Nov 02, 2014 1:16 pm ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
my old set up viewtopic.php?f=14&t=6610&hilit=aux+power soldering/wiring tech here viewtopic.php?f=17&t=15301 |
|
| Author: | fordem [ Mon Nov 03, 2014 12:49 am ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
mnemonix wrote: Use a Narva fused relay to make things even simpler. I suggest you not mount those where they can get wet. |
|
| Author: | zoukshin [ Thu Nov 06, 2014 10:50 am ] |
| Post subject: | Re: anyone got photos of a neat relay set up? |
Mounted mine on a plate close to the battery |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|